prEN 17619

Classification of wood adhesives for non-structural timber products for exterior use

This document establishes a classification of wood adhesives for non-structural applications for exterior use.
This document specifies performance requirements and durability classes of such adhesives for use in an environment corresponding to the defined conditions.
The performance requirements of this document apply to the adhesive only, not to wooden products.
This document is primarily intended to assess the performance of adhesives. The requirements apply to the type testing of the adhesives. Production control activities are outside the scope of this document.

Klassifizierung von Holzklebstoffen für nicht tragende Holzprodukte zur Verwendung im Außenbereich

Dieses Dokument stellt eine Klassifizierung von Holzklebstoffen für nicht tragende Anwendungen zur Verwendung im Außenbereich ohne angemessene Oberflächenbeschichtung auf.
Dieses Dokument legt Leistungsanforderungen und Beanspruchungsgruppen von Klebstoffen zur Verwendung in einer Umgebung fest, die den festgelegten Bedingungen entspricht.
Die Leistungsanforderungen in diesem Dokument gelten lediglich für den Klebstoff, nicht für Holzprodukte.
Mit diesem Dokument soll hauptsächlich das Leistungsverhalten von Klebstoffen beurteilt werden. Die Anforderungen gelten für die Typprüfung von Klebstoffen. Aktivitäten hinsichtlich der Produktionskontrolle gehören nicht zum Anwendungsbereich dieses Dokuments.

Classification des colles à bois pour les produits en bois non structuraux utilisés à l'extérieur

Le présent document spécifie une classification des colles à bois destinées à des usages non structuraux à l'extérieur sans protection par un revêtement de surface adéquat.
Le présent document spécifie des exigences de performance et les classes de résistance pour ces colles pour une utilisation dans un environnement correspondant aux conditions définies.
Les exigences de performance définies dans le présent document s’appliquent uniquement aux colles et non aux produits en bois.
Le présent document est principalement destiné à évaluer la performance des colles. Les exigences s’appliquent aux essais de type des colles. Les activités de contrôle de la production ne relèvent pas du domaine d’application du présent document.

Razvrstitev lepil za les za nekonstrukcijske izdelke iz lesa za zunanjo uporabo

Standards Content (sample)

SLOVENSKI STANDARD
oSIST prEN 17619:2021
01-januar-2021
Razvrstitev lepil za les za nekonstrukcijske izdelke iz lesa za zunanjo uporabo

Classification of wood adhesives for non-structural timber products for exterior use

Klassifizierung von Holzklebstoffen für nicht tragende Holzprodukte zur Verwendung im

Außenbereich

Classification des colles à bois pour les produits en bois non structuraux utilisés à

l'extérieur
Ta slovenski standard je istoveten z: prEN 17619
ICS:
83.180 Lepila Adhesives
oSIST prEN 17619:2021 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 17619:2021
---------------------- Page: 2 ----------------------
oSIST prEN 17619:2021
DRAFT
EUROPEAN STANDARD
prEN 17619
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2020
ICS 83.180
English Version
Classification of wood adhesives for non-structural timber
products for exterior use

Classification des colles à bois pour les produits en bois Klassifizierung von Holzklebstoffen für nicht tragende

non structuraux utilisés à l'extérieur Holzprodukte zur Verwendung im Außenbereich

This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee

CEN/TC 193.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations

which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17619:2020 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 17619:2021
prEN 17619:2020 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

Introduction .................................................................................................................................................................... 4

1 Scope .................................................................................................................................................................... 5

2 Normative references .................................................................................................................................... 5

3 Terms and definitions ................................................................................................................................... 5

4 Classification ..................................................................................................................................................... 5

5 Test method ...................................................................................................................................................... 6

6 Requirements ................................................................................................................................................... 6

7 Test report ......................................................................................................................................................... 7

Annex A (informative) Assessment of end product bonding quality ......................................................... 9

A.1 Assessment of end product bonding quality ......................................................................................... 9

Bibliography ................................................................................................................................................................. 10

---------------------- Page: 4 ----------------------
oSIST prEN 17619:2021
prEN 17619:2020 (E)
European foreword

This document (prEN 17619:2020) has been prepared by Technical Committee CEN/TC 193 “Adhesives”,

the secretariat of which is held by UNE.
This document is currently submitted to the CEN Enquiry.
---------------------- Page: 5 ----------------------
oSIST prEN 17619:2021
prEN 17619:2020 (E)
Introduction

European Standards giving a common classification with respect to durability classes for wood adhesives

for exterior uses will allow considerable improvement in consumer protection in any future product

liability system with regard to properties guaranteed by the adhesive manufacturer.

---------------------- Page: 6 ----------------------
oSIST prEN 17619:2021
prEN 17619:2020 (E)
1 Scope

This document establishes a classification of wood adhesives for non-structural applications for exterior

use without protection by an adequate surface coating.

This document specifies performance requirements and durability classes of such adhesives for use in an

environment corresponding to the defined conditions.

The performance requirements of this document apply to the adhesive only, not to wooden products.

This document is primarily intended to assess the performance of adhesives. The requirements apply to

the type testing of the adhesives. Production control activities are outside the scope of this document.

2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

EN 204:2016, Classification of thermoplastic wood adhesives for non-structural applications

EN 205, Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear

strength of lap joints
EN 923, Adhesives - Terms and definitions

EN 12765:2016, Classification of thermosetting wood adhesives for non-structural applications

3 Terms and definitions
For the purposes of this document, the terms and de
...