EN ISO 22633:2019
(Main)Adhesives - Test methods for adhesives for floor coverings and wall coverings - Determination of dimensional changes of a linoleum floor covering in contact with an adhesive (ISO 22633:2019)
Adhesives - Test methods for adhesives for floor coverings and wall coverings - Determination of dimensional changes of a linoleum floor covering in contact with an adhesive (ISO 22633:2019)
This document specifies a test method to measure the dimensional changes of a linoleum floorcovering while being adhered to a glass substrate. This method is to be used in conjunction with other test methods and not used solely to determine the suitability of a particular adhesive/linoleum combination.
Klebstoffe - Prüfverfahren für Klebstoffe für Boden- und Wandbeläge - Bestimmung der Maßänderung eines Linoleumbodenbelages im Kontakt mit einem Klebstoff (ISO 22633:2019)
Dieses Dokument legt ein Prüfverfahren zur Messung der Maßänderungen von Linoleum¬bodenbelägen fest, die auf ein Glassubstrat geklebt sind. Dieses Prüfverfahren ist in Verbindung mit anderen Prüfver¬fahren anzuwenden und darf nicht alleine zur Bestimmung der Eignung einer speziellen Klebstoff-/Linoleum-Kombination verwendet werden.
Adhésifs - Méthodes d'essais pour adhésifs pour revêtements de sols et revêtements muraux - Détermination des variations dimensionnelles d'un revêtement en linoléum en contact avec un adhésif (ISO 22633:2019)
Le présent document spécifie une méthode d'essai pour mesurer les variations dimensionnelles d'un revêtement de sol en linoléum lorsqu'il est collé sur un support en verre. Cette méthode est destinée à être utilisée conjointement avec d'autres méthodes d'essai et non seule, pour évaluer l'adéquation d'une combinaison adhésif/linoléum particulière.
Lepila - Preskusne metode za lepila za talne in stenske obloge - Ugotavljanje sprememb mer talnih oblog iz linoleja ob stiku z lepilom (ISO 22633:2019)
Ta evropski standard določa preskusno metodo za merjenje dimenzijskih sprememb talnih oblog iz linoleja, prilepljenih na stekleno podlago. Ta metoda se uporablja skupaj z drugimi preskusnimi metodami in se ne uporablja samo za določitev ustreznosti določene kombinacije lepila/linoleja.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2019
Nadomešča:
SIST EN 1841:2000
Lepila - Preskusne metode za lepila za talne in stenske obloge - Ugotavljanje
sprememb mer talnih oblog iz linoleja ob stiku z lepilom (ISO 22633:2019)
Adhesives - Test methods for adhesives for floor coverings and wall coverings -
Determination of dimensional changes of a linoleum floor covering in contact with an
adhesive (ISO 22633:2019)
Klebstoffe - Prüfverfahren für Klebstoffe für Boden- und Wandbeläge - Bestimmung der
Maßänderung eines Linoleumbodenbelages im Kontakt mit einem Klebstoff (ISO
22633:2019)
Adhésifs - Méthodes d'essais pour adhésifs pour revêtements de sols et revêtements
muraux - Détermination des variations dimensionnelles d'un revêtement en linoléum en
contact avec un adhésif (ISO 22633:2019)
Ta slovenski standard je istoveten z: EN ISO 22633:2019
ICS:
83.180 Lepila Adhesives
97.150 Talne obloge Floor coverings
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 22633
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2019
EUROPÄISCHE NORM
ICS 83.180 Supersedes EN 1841:1998
English Version
Adhesives - Test methods for adhesives for floor coverings
and wall coverings - Determination of dimensional
changes of a linoleum floor covering in contact with an
adhesive (ISO 22633:2019)
Adhésifs - Méthodes d'essais pour adhésifs pour Klebstoffe - Prüfverfahren für Klebstoffe für Boden-
revêtements de sols et revêtements muraux - und Wandbeläge - Bestimmung der Maßänderung
Détermination des variations dimensionnelles d'un eines Linoleumbodenbelages im Kontakt mit einem
revêtement en linoléum en contact avec un adhésif Klebstoff (ISO 22633:2019)
(ISO 22633:2019)
This European Standard was approved by CEN on 8 September 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22633:2019 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 22633:2019) has been prepared by Technical Committee ISO/TC 61 "Plastics"
in collaboration with Technical Committee CEN/TC 193 “Adhesives” the secretariat of which is held by
UNE.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2020, and conflicting national standards shall
be withdrawn at the latest by March 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 1841:1998.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 22633:2019 has been approved by CEN as EN ISO 22633:2019 without any modification.
INTERNATIONAL ISO
STANDARD 22633
First edition
2019-07
Adhesives — Test methods for
adhesives for floor coverings and wall
coverings — Determination of the
dimensional changes of a linoleum
floor covering in contact with an
adhesive
Adhésifs — Méthodes d'essais pour adhésifs pour revêtements de sols et
revêtements muraux — Détermination des variations dimensionnelles
d'un revêtement en linoléum en contact avec un adhésif
Reference number
ISO 22633:2019(E)
©
ISO 2019
ISO 22633:2019(E)
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
ISO 22633:2019(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus and materials. 2
6 Preparation of test specimens . 3
6.1 General . 3
6.2 Conditioning . 4
6.3 Datum points . 4
6.4 Reference dimension — Measurement A . 5
7 Test procedure . 5
7.1 Application of the adhesive . 5
7.2 Bonding . 5
7.3 Measurements . 5
8 Evaluation and expression of results . 5
9 Test report . 6
Bibliography . 7
ISO 22633:2019(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso
.org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 11,
Products.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/members .html.
iv © ISO 2019 – All rights reserved
ISO 22633:2019(E)
Introduction
This test is designed as a laboratory test to show the change in dimensions of a linoleum floorcovering in
the early stages of bonding with an adhesive. Glass was chosen as an impervious substrate to maximize
the effect.
This test does not necessarily reproduce the effects which occur on porous substrates such as in
practical site conditions.
INTERNATIONAL STANDARD ISO 22633:2019(E)
Adhesives — Test methods for adhesives for floor coverings
and wall coverings — Determination of the dimensional
changes of a linoleum floor covering in contact with an
adhesive
SAFETY PRECAUTIONS — Persons using this document should be familiar with the normal
laboratory practice, if applicable. This document does not purport to address all of the
safety problems, if any, associated with its use. It is the responsibility of the user to establish
appropriate safety and health practices.
ENVIRONMENTAL STATEMENT — It is understood that some of the material permitted in
this document may have negative environmental impact. As technological advantages lead to
acceptable alternatives for these materials, they will be eliminated from this document to the
extent possible. At the end of the test, it is essential that the user of this document take care to
carry out an appropriate disposal of the wastes.
1 Scope
This document specifies a test method to measure the dimensional changes of a linoleum floorcovering
while being adhered to a glass substrate. This method is to be used in conjunction with other test
methods a
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.