Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines

This document deals with the significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary and displaceable single spindle hand fed/integrated fed routing machines with fixed head but allowing only movement along the axis of the tool during machining hereinafter referred to as "machines" designed to cut solid wood, chip board, fibreboard, plywood and also these materials if they are covered with plastic laminate, edgings or veneer when they are used as intended and under the conditions foreseen by the manufacturer.
NOTE 1   For the definition of stationary and displaceable machine see 3.2.17 and 3.2.18.
This document does not apply to:
a)   inverted pin routers and radial arm routers (machines where the work piece is fixed and the tool head is manually moved);
b)   NC boring machines and NC routing machines;
NOTE 2   NC boring machines and NC routing machines are dealt with in prEN 848-3:2006.
c)   hand-held routers or any adaptation permitting their use in a different mode, e.g. bench mounting;
NOTE 3   Hand-held motor-operated electric tools are dealt with in EN 60745-1:2003 together with EN 60745-2-17:2003.
d)   routing machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand. The bench can also be an integrated part of the machine if it consists of hinged legs which can be extended down..
NOTE 4   Transportable motor-operated electric tools are dealt with in EN 61029-1:2000 together with
EN 61029-2-8:2003.
This document is not applicable to single spindle hand fed/integrated fed routing machines which are manufactured before the date of its publication as EN.

Sicherheit von Holzbearbeitungsmaschinen - Fräsmaschinen für einseitige Bearbeitung mit drehendem Werkzeug - Teil 2: Einspindelige Oberfräsmaschinen mit Handvorschub/mechanischem Vorschub

Dieses Dokument behandelt die im Abschnitt 4 aufgeführten signifikanten Gefährdungen, Gefährdungs¬situationen und Gefährdungsereignisse, die auf stationäre und verschiebbare einspindelige Oberfräs¬maschinen mit Handvorschub/mechanischem Vorschub mit feststehendem Werkzeugträger, der aber eine Bewegung nur in Richtung der Werkzeugachse während der Bearbeitung zulässt, zutreffen  im Folgenden als Maschinen bezeichnet, die konstruiert sind zum Bearbeiten von Massivholz, Spanplatten, Faserplatten, Sperrholz sowie diesen Werkstoffen, wenn sie kunststoffbeschichtet oder mit Kunststoffkanten oder Furnier versehen sind, wenn sie bestimmungsgemäß und entsprechend den vorhersehbaren Bedingungen des Herstellers verwendet werden.
ANMERKUNG 1   Hinsichtlich der Definitionen für stationäre und verschiebbare Maschinen siehe 3.2.17 und 3.2.18.
Dieses Dokument gilt nicht für:
a)   Kopier-Unterfräsmaschinen und Radialarm-Oberfräsmaschinen (Maschinen bei denen das Werkstück festliegt und der Werkzeugträger von Hand bewegt wird);
b)   NC-Bohrmaschinen und NC-Fräsmaschinen;
ANMERKUNG 2   NC-Bohrmaschinen und NC-Fräsmaschinen sind in EN 848-3:2007 behandelt.
c)   handgeführte Oberfräsmaschinen oder irgendwelche Einrichtungen, die ihre Verwendung in einer anderen Weise, z. B. in einer Stationäreinrichtung, ermöglichen;
ANMERKUNG 3   Handgeführte motorbetriebene Elektrowerkzeuge sind in EN 60745-1:2003 zusammen mit EN 60745 2-17:2003 behandelt.
d)   Oberfräsmaschinen, die auf ein Gestell oder auf einen Tisch, der einem Gestell ähnlich ist, aufgesetzt sind und die vorgesehen sind, während des Betriebs stationär verwendet zu werden und die von einer Person von Hand angehoben werden können. Das Gestell kann auch ein fester Teil der Maschine sein, wenn es aus scharnierbefestigten Füßen besteht, die heruntergeklappt werden können.
ANMERKUNG 4   Transportable motorbetriebene Elektrowerkzeuge sind in EN 61029-1:2000 zusammen mit prEN 61029-2-8:2002 behandelt.

Sécurité des machines pour le travail du bois - Machines à fraiser sur une face, outil rotatif - Partie 2: Défonceuses monobroche à avance manuelle/mécanisée

Le présent document traite des phénomènes dangereux, situations et événements dangereux significatifs, tels qu’énumérés dans l’Article 4, applicables aux défonceuses monobroche à avance manuelle ou mécanisée, fixes ou transportables, avec une tête fixe, qui ne permet que le mouvement le long de l’axe de l’outil durant l’usinage, et désignées ci-après sous le terme « machines ». Celles-ci sont conçues pour usiner du bois, des panneaux de fibres ou de particules, de contre-plaqué, y compris quand la surface ou le chant sont recouverts de plastique, de bordures ou de placage, durant l’utilisation normale et dans les conditions prévues par le fabricant.
NOTE 1   Pour la définition de machine fixe et transportable, voir 3.2.17 et 3.2.18.
Le présent document n'est pas applicable aux :
a)   défonceuses à téton inversé ni aux défonceuses radiales (machines pour lesquelles la pièce est fixe et le porte-outil est déplacé manuellement) ;
b)   perceuses et défonceuses à commande numérique ;
NOTE 2   Les perceuses et défonceuses à commande numérique sont traitées dans l’EN 848-3:2007.
c)   défonceuses portatives ou toute adaptation permettant leur utilisation de manière différente, par exemple fixées sur un bâti ;
NOTE 3   Les outils électroportatifs à moteur sont traités dans l’EN 60745-1:2003 à utiliser conjointement avec l’EN 60745-2-17:2003.
d)   réglages des défonceuses montées sur un bâti ou sur une table similaire à un bâti, conçues pour réaliser un travail à poste fixe et capables d’être soulevées à la main par une personne. Le bâti peut aussi être une partie intégrée à la machine s’il consiste en pieds articulés qui peuvent être dépliés.
NOTE 4   Les machines-outils semi-fixes électriques sont traitées dans l’EN 61029-1:2000 à utiliser conjointement avec le prEN 61029-2-8:2002.
Le présent document n’est pas applicable aux défonceuses monobroche à avance manuelle ou mécanisée fabriquées avant la date de publication comme EN.

Varnost lesnoobdelovalnih strojev - Rezkalniki z vrtilnim orodjem za enostransko obdelavo - 2. del: Enovretenski namizni rezkalni stroji z ročnim/mehanskim podajanjem

Ta dokument opredeljuje vsa velika tveganja, nevarna stanja in dogodke, kot so našteti v določbi št. 4, ki so pomembni za stacionarne in premestljive enovretenske navpične rezkalne stroje z ročnim/mehanskim podajanjem s fiksno glavo, ki dovoljujejo le gibanje vzdolž osi orodja med strojno obdelavo, v nadaljevanju »stroji«, ki so zasnovani za rezanje masivnega lesa, ivernih plošč, plošč iz stisnjenih vlaken, vezanega lesa, kot tudi teh istih materialov, če so prekriti s plastičnim laminatom, robovi ali furnirjem, kadar se uporabljajo v skladu z namembnostjo in pod pogoji, ki jih predvidi proizvajalec.

General Information

Status
Withdrawn
Publication Date
27-Feb-2007
Withdrawal Date
10-Nov-2009
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
11-Nov-2009
Completion Date
11-Nov-2009

Relations

Buy Standard

Standard
EN 848-2:2007
English language
51 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 848-2:2007
01-maj-2007
1DGRPHãþD
SIST EN 848-2:2000
9DUQRVWOHVQRREGHORYDOQLKVWURMHY5H]NDOQLNL]YUWLOQLPRURGMHP]DHQRVWUDQVNR
REGHODYRGHO(QRYUHWHQVNLQDPL]QLUH]NDOQLVWURML]URþQLPPHKDQVNLP
SRGDMDQMHP
Safety of woodworking machines - One side moulding machines with rotating tool - Part
2: Single spindle hand fed/integrated fed routing machines
Sicherheits von Holzbearbeitungsmaschinen - Fräsmaschinen für einseitige Bearbeitung
mit drehendem Werkzeug - Teil 2: Einspindelige Oberfräsmaschinen mit
Handvorschub/mechanischem Vorschub
Sécurité des machines pour le travail du bois - Machines a fraiser sur une face, outil
rotatif - Partie 2: Défonceuses monobroche a avance manuelle/mécanisée
Ta slovenski standard je istoveten z: EN 848-2:2007
ICS:
79.120.10 Lesnoobdelovalni stroji Woodworking machines
SIST EN 848-2:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 848-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2007
ICS 79.120.10 Supersedes EN 848-2:1998
English Version
Safety of woodworking machines - One side moulding machines
with rotating tool - Part 2: Single spindle hand fed/integrated fed
routing machines
Sécurité des machines pour le travail du bois - Machines à Sicherheits von Holzbearbeitungsmaschinen -
fraiser sur une face, outil rotatif - Partie 2: Défonceuses Fräsmaschinen für einseitige Bearbeitung mit drehendem
monobroche à avance manuelle/mécanisée Werkzeug - Teil 2: Einspindelige Oberfräsmaschinen mit
Handvorschub/mechanischem Vorschub
This European Standard was approved by CEN on 13 January 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 848-2:2007: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN 848-2:2007 (E)
Contents Page
Foreword.4
Introduction .5
1 Scope.6
2 Normative references.6
3 Terms and definitions .8
3.1 General.8
3.2 Definitions.8
3.3 Terms.14
4 List of significant hazards .15
5 Safety requirements and/or measures .19
5.1 General.19
5.2 Controls.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.