EN 15496:2008

Cycles - Requirements and test methods for cycle locks

This European Standard specifies performance requirements and describes test methods for strength, security, function and corrosion resistance of locks for cycles. It also covers certain aspects regarding the safety of the rider of the cycle on which the lock is mounted. This standard covers permanently-mounted cycle locks and removable locks.

Fahrräder - Anforderungen und Prüfverfahren für Fahrradschlösser

Diese Europäische Norm legt Anforderungen an die Leistungsfähigkeit fest und beschreibt die Prüfverfahren
hinsichtlich der Festigkeit, Sicherheit, Funktion und Korrosionsbeständigkeit von Fahrradschlössern. Sie
behandelt auch bestimmte Aspekte im Hinblick auf die Sicherheit des Fahrers, an dessen Fahrrad das
Schloss angebracht ist. Diese Norm behandelt dauerhaft befestigte und abnehmbare Fahrradschlösser.

Cycles - Exigences et méthodes d'essai pour les antivols pour cycles

La présente Norme européenne prescrit les exigences de performance et décrit les méthodes requises pour les essais de résistance, de sécurité, de fonctionnalité et de résistance à la corrosion appliqués aux antivols destinés aux cycles. La présente norme concerne les antivols installés définitivement et les antivols amovibles.

Kolesa - Zahteve in preskusne metode za ključavnice

General Information

• Status: Published
• Publication Date: 15-Jan-2008
• Withdrawal Date: 30-Jul-2008
• ICS: 43.150 - Cycles
• Technical Committee: CEN/TC 333 - Cycles
• Drafting Committee: CEN/TC 333 - Cycles
• Current Stage: 9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
• Completion Date: 16-Jan-2019
• Ref Project: SIST EN 15496:2008 - Cycles - Requirements and test methods for cycle locks

Relations

• Revised: prEN 15496 - Cycles - Requirements and test methods for cycle locks
• Effective Date: 19-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cycles - Requirements and test methods for cycle locksCycles - Exigences et méthodes d'essai pour les antivols pour cyclesFahrräder - Anforderungen und Prüfverfahren für FahrradschlösserTa slovenski standard je istoveten z:EN 15496:2008SIST EN 15496:2008en,fr,de43.150ICS:SLOVENSKI
STANDARDSIST EN 15496:200801-april-2008

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15496January 2008ICS 43.150 English VersionCycles - Requirements and test methods for cycle locksCycles - Exigences et méthodes d'essai pour les antivolspour cyclesFahrräder - Anforderungen und Prüfverfahren fürFahrradschlösserThis European Standard was approved by CEN on 24 November 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15496:2008: E

Calculation of m*.29 Annex B (normative)
Dimensions of test stand.31 Annex C (informative)
Photographs of tools specified in Table 2 and Table 3.32 Annex D (informative)
Photographs of picking tools.35

Introduction This European Standard has been developed in response to demand throughout Europe aimed to ensure that locking systems manufactured in compliance with this standard will offer unattended bicycles a high, practical level of security. The tests have been designed and evaluated in practical tests by experts in the lock industry and consideration has been given to the latest techniques employed by professional cycle-thieves whose methods are constantly changing. The scope has been limited to security and durability requirements and, to some extent, the safety of the rider.

(ISO 9227:2006) EN ISO 9994, Lighters - Safety specification (ISO 9994:2005) EN ISO/IEC 17025, General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 cable lock cable made of steel wire, in a single or spiral loop, with one end perma
...