EN 12572-2:2008

Artificial climbing structures - Part 2: Safety requirements and test methods for bouldering walls

This European Standard specifies the safety requirements and calculation methods for bouldering walls, in-cluding the safety zone.
This European Standard is applicable when the bouldering is in normal use.
This European Standard is not applicable to ice climbing, dry tooling, playground equipment and deep water soloing.

Künstliche Kletteranlagen - Teil 2: Sicherheitstechnische Anforderungen und Prüfverfahren für Boulderwände

Diese Europäische Norm legt die sicherheitstechnischen Anforderungen und Prüfverfahren von Boulderwänden einschließlich der Sicherheitszone fest.
Diese Europäische Norm gilt für den üblichen Gebrauch der Boulderanlagen.
Diese Europäische Norm gilt nicht für Eisklettern, „Drytooling“ (Eisklettern an künstlichen Wänden), Spielplatzgeräte und „Deep Water Soloing“ (seilfreies Klettern über tiefem Wasser).

Structures artificielles d'escalade - Partie 2 : Exigences de sécurité et méthodes d'essai relatives aux pans et blocs d'escalade

La présente Norme européenne spécifie les exigences de sécurité et les méthodes de calcul applicable aux blocs d’escalade, y compris la zone de sécurité.
La présente Norme européenne est applicable lorsque les blocs d’escalade sont utilisés normalement.
La présente Norme européenne ne s’applique pas aux techniques d’escalade sur glace, d’escalade mixte, aux équipements d’aires de jeux ou d’escalade sans assurage au dessus de l’eau (« deep water soloing »).

Umetne plezalne stene - 2. del: Varnostne zahteve in preskusne metode za balvanske stene

General Information

• Status: Withdrawn
• Publication Date: 04-Nov-2008
• Withdrawal Date: 10-Jan-2017
• ICS: 97.220.10 - Sports facilities
• Technical Committee: CEN/TC 136 - Sports, playground and other recreational equipment
• Drafting Committee: CEN/TC 136/WG 9 - Artificial climbing structures
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 11-Jan-2017
• Ref Project: SIST EN 12572-2:2009 - Artificial climbing structures - Part 2: Safety requirements and test methods for bouldering walls

Relations

• Replaces: EN 12572:1998 - Artificial climbing structures - Protection points, stability requirements and test methods
• Effective Date: 22-Dec-2008
• Replaced By: EN 12572-2:2017 - Artificial climbing structures - Part 2: Safety requirements and test methods for bouldering walls
• Effective Date: 18-Jan-2017

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Umetne plezalne stene - 2. del: Varnostne zahteve in preskusne metode za balvanske steneKünstliche Kletteranlagen - Teil 2: Sicherheitstechnische Anforderungen und Prüfverfahren für BoulderwändeStructures artificielles d'escalade - Partie 2 : Exigences de sécurité et méthodes d'essai relatives aux murs d'escalade (pans et blocs)Artificial climbing structures - Part 2: Safety requirements and test methods for bouldering walls97.220.10Športni objektiSports facilitiesICS:Ta slovenski standard je istoveten z:EN 12572-2:2008SIST EN 12572-2:2009en,de01-januar-2009SIST EN 12572-2:2009SLOVENSKI
STANDARDSIST EN 12572:20021DGRPHãþD



SIST EN 12572-2:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12572-2November 2008ICS 97.220.10Supersedes EN 12572:1998
English VersionArtificial climbing structures - Part 2: Safety requirements andtest methods for bouldering wallsStructures artificielles d'escalade - Partie 2 : Exigences desécurité et méthodes d'essai relatives aux pans et blocsd'escaladeKünstliche Kletteranlagen - Teil 2: SicherheitstechnischeAnforderungen und Prüfverfahren für BoulderwändeThis European Standard was approved by CEN on 27 September 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12572-2:2008: ESIST EN 12572-2:2009



EN 12572-2:2008 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Safety requirements and test methods.5 5 Marking.8 6 Instruction manual.8 7 Conformity of the bouldering wall.9 Annex A (normative)
Effects.10 Annex B (normative)
Method of calculating of structural integrity and stability.11 Annex C (normative)
Impact test of surface elements.13 Annex D (normative)
Hold insert resistance test.16 Annex E (normative)
Inspection and maintenance.18 Annex F (informative)
Testing of the impact area connecting system.20 Bibliography.22
SIST EN 12572-2:2009



EN 12572-2:2008 (E) 3 Foreword This document (EN 12572-2:2008) has been prepared by Technical Committee CEN/TC 136 “Sports, playground and other recreational facilities and equ
...