EN ISO 11844-3:2008

Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity (ISO 11844-3:2006)

ISO 11844-3:2006 describes methods for measuring the environmental parameters used to classify the corrosivity of indoor atmospheres on metals and alloys.

Korrosion von Metallen und Legierungen - Einteilung der Korrosivität in Räumen mit geringer Korrosivität - Teil 3: Messung der Umgebungsparameter, die Korrosivität in Räumen beeinflussen (ISO 11844-3:2006)

Dieser Teil von ISO 11844 beschreibt Verfahren zum Messen der Umgebungsparameter, die dazu verwendet werden, die Korrosivität von Metallen und Legierungen in Innenräumen zu klassifizieren.

Corrosion des métaux et alliages - Classification de la corrosivité faible des atmosphères d'intérieur - Partie 3: Mesurage des paramètres environnementaux affectant la corrosivité des atmosphères d'intérieur (ISO 11844-3:2006)

L'ISO 11844-3:2006 décrit des méthodes de mesurage des paramètres environnementaux utilisés pour la classification de la corrosivité des atmosphères d'intérieur.

Korozija kovin in zlitin - Klasifikacija notranjih atmosfer z nizko korozivnostjo - 3. del: Klasifikacija in merjenje okoljskih parametrov, ki vplivajo na korozivnost v zaprtih prostorih (ISO 11844-3:2006)

General Information

• Status: Withdrawn
• Publication Date: 22-Apr-2008
• Withdrawal Date: 28-Jan-2020
• ICS: 77.060 - Corrosion of metals
• Technical Committee: CEN/TC 262 - Metallic and other inorganic coatings
• Drafting Committee: CEN/TC 262 - Metallic and other inorganic coatings
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 29-Jan-2020
• Ref Project: SIST EN ISO 11844-3:2008 - Corrosion of metals and alloys - Classification of indoor atmospheres with low corrosivity - Part 3: Classification and measurement of environmental parameters affecting indoor corrosivity (ISO 11844-3:2006)

Relations

• Replaced By: EN ISO 11844-3:2020 - Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity (ISO 11844-3:2020)
• Effective Date: 08-Feb-2017

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11844-3:2008
01-julij-2008
Korozija kovin in zlitin - Klasifikacija notranjih atmosfer z nizko korozivnostjo - 3.
del: Klasifikacija in merjenje okoljskih parametrov, ki vplivajo na korozivnost v
zaprtih prostorih (ISO 11844-3:2006)
Corrosion of metals and alloys - Classification of indoor atmospheres with low corrosivity
- Part 3: Classification and measurement of environmental parameters affecting indoor
corrosivity (ISO 11844-3:2006)
Corrosion des métaux et alliages - Classification de la corrosivité faible des atmospheres
d'intérieur - Partie 3: Mesurage des parametres environnementaux affectant la
corrosivité des atmospheres d'intérieur (ISO 11844-3:2006)
Ta slovenski standard je istoveten z: EN ISO 11844-3:2008
ICS:
77.060 Korozija kovin Corrosion of metals
SIST EN ISO 11844-3:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 11844-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2008
ICS 77.060

English Version
Corrosion of metals and alloys - Classification of low corrosivity
of indoor atmospheres - Part 3: Measurement of environmental
parameters affecting indoor corrosivity (ISO 11844-3:2006)
Corrosion des métaux et alliages - Classification de la Korrosion von Metallen und Legierungen - Einteilung der
corrosivité faible des atmosphères d'intérieur - Partie 3: Korrosivität in Räumen mit geringer Korrosivität - Teil 3:
Mesurage des paramètres environnementaux affectant la Messung der Umgebungsparameter, die Korrosivität in
corrosivité des atmosphères d'intérieur (ISO 11844-3:2006) Räumen beeinflussen (ISO 11844-3:2006)
This European Standard was approved by CEN on 21 March 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11844-3:2008: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 11844-3:2008 (E)
Contents Page
Foreword.3

2

---------------------- Page: 3 ----------------------

EN ISO 11844-3:2008 (E)
Foreword
The text of ISO 11844-3:2006 has been prepared by Technical Committee ISO/TC 156 “Corrosion of metals
and alloys” of the International Organization for Standardization (ISO) and has been taken over as EN ISO
11844-3:2008 by Technical Committee CEN/TC 262 “Metallic and other inorganic coatings” the secretariat of
which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2008, and conflicting national standards shall be withdrawn at
the latest by October 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 11844-3:2006 has been approved by CEN as a EN ISO 11844-3:2008 without any
modification.

3

---------------------- Page: 4 ----------------------

INTERNATIONAL ISO
STANDARD 11844-3
First edition
2006-05-15


Corrosion
...