EN 2549:2006

Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C

This standard specifies the characteristics of bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated.
Classification: 1 100 MPa / 315 °C

Luft- und Raumfahrt - Sechskant-Passschrauben, kurzes Gewinde, aus Titanlegierung, anodisiert, MoS2-geschmiert, metrische Reihe - Klasse: 1 100 MPa (bei Raumtemperatur) / 315 °C

Diese Norm legt die Eigenschaften für Sechskant-Passschrauben, kurzes Gewinde, aus Titanlegierung, ano¬disiert, MoS2-geschmiert, metrische Reihe, fest.
Klasse: 1 100 MPa )/315 °C )

Série aérospatiale - Vis à tête hexagonale normale, fût normal à tolérance serrée, filetage court, en alliage de titane, anodisées, lubrifiées MoS2, série métrique - Classification : 1 100 MPa (à température ambiante) / 315 °C

Aeronavtika - Sorniki, normalna šestroba glava, ozka toleranca, kratek navoj, iz titanove zlitine, anodizirani, namazani z MoS2, metrska serija - Klasifikacija: 1 100 MPa (pri temperaturi okolice) / 315 °C

General Information

• Status: Published
• Publication Date: 16-May-2006
• Withdrawal Date: 29-Nov-2006
• ICS: 49.030.20 - Bolts, screws, studs
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3 - Mechanical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 31-May-2017
• Ref Project: SIST EN 2549:2009 - Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C

Relations

• Replaces: EN 2549:1995 - Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 °C
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aeronavtika - Sorniki, normalna šestroba glava, ozka toleranca, kratek navoj, iz titanove zlitine, anodizirani, namazani z MoS2, metrska serija - Klasifikacija: 1 100 MPa (pri temperaturi okolice) / 315 °CLuft- und Raumfahrt - Sechskant-Passschrauben, kurzes Gewinde, aus Titanlegierung, anodisiert, MoS2-geschmiert, metrische Reihe - Klasse: 1 100 MPa (bei Raumtemperatur) / 315 °CSérie aérospatiale - Vis à tête hexagonale normale, fût normal à tolérance serrée, filetage court, en alliage de titane, anodisées, lubrifiées MoS2, série métrique - Classification : 1 100 MPa (à température ambiante) / 315 °CAerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C49.030.20Sorniki, vijaki, stebelni vijakiBolts, screws, studsICS:Ta slovenski standard je istoveten z:EN 2549:2006SIST EN 2549:2009en,de01-marec-2009SIST EN 2549:2009SLOVENSKI
STANDARDSIST EN 2549:20011DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2549
May 2006 ICS 49.030.20 Supersedes EN 2549:1995 English Version
Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315
°C
Série aérospatiale - Vis à tête hexagonale normale, fût normal à tolérance serrée, filetage court, en alliage de titane, anodisées, lubrifiées MoS2, série métrique - Classification : 1 100 MPa (à température ambiante) / 315
°C
Luft- und Raumfahrt - Sechskant-Paßschrauben, kurzes Gewinde, aus Titanlegierung, anodisiert, MoS2-geschmiert - Klasse: 1 100 MPa (bei Raumtemperatur) / 315
°C This European Standard was approved by CEN on 13 January 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2549:2006: ESIST EN 2549:2009
...