EN ISO 534:2005
(Main)Paper and board - Determination of thickness, density and specific volume (ISO 534:2005)
Paper and board - Determination of thickness, density and specific volume (ISO 534:2005)
ISO 534:2005 specifies two methods for measuring the thickness of paper and board:
a) the measurement of a single sheet of paper or board, as a single sheet thickness,
b) the measurement of a pack of sheets of paper as a bulking thickness.
It also specifies the following calculation methods, from the thickness determinations:
calculation methods for the apparent sheet density and for the apparent bulk density;
calculation methods for the apparent specific sheet volume and for the apparent specific bulk volume.
It is not applicable to corrugated fibreboard, and method a) is not applicable to materials with a grammage higher than 225 g/m2.
Papier und Pappe - Bestimmung der Dicke, der Dichte und des spezifischen Volumens (ISO 534:2005)
Diese Internationale Norm legt zwei Verfahren zur Messung der Dicke von Papier und Pappe fest:
a) Messung eines Einzelblattes von Papier oder Pappe als Einzelblattdicke;
b) Messung eines Stapels von Papierblättern mit der mittleren Dicke eines Einzelblattes.
Abgeleitet aus der Bestimmung der Dicke legt sie ferner Berechnungsverfahren fest für:
- die scheinbare Blattdichte und die scheinbare Stapeldichte und-
- das scheinbare spezifische Volumen des Blattes und das scheinbare spezifische Volumen des Stapels.
Diese Internationale Norm ist nicht anwendbar auf Wellpappe. Verfahren a) ist für Materialien mit einer flächenbezogenen Masse von mehr als 225 g/m² nicht geeignet.
ANMERKUNG 1 Im Allgemeinen führen diese beiden Verfahren zu unterschiedlichen Ergebnissen.
ANMERKUNG 2 Für Tissue-Papier und Tissue-Produkte sollte ISO 12625-3 angewendet werden.
Papier et carton - Détermination de l'épaisseur, de la masse volumique et du volume spécifique (ISO 534:2005)
L'ISO 534:2005 spécifie deux méthodes de mesure de l'épaisseur de papier et de carton:
a) le mesurage sur une feuille unique de papier ou de carton, exprimé par l'épaisseur d'une feuille unique;
b) le mesurage sur une liasse de feuilles de papier, exprimé par l'épaisseur moyenne d'une feuille en liasse.
Elle spécifie en outre des méthodes de calcul, à partir des déterminations de l'épaisseur,
de la masse volumique apparente d'une feuille unique et de la masse volumique apparente d'une feuille en liasse, ainsi que
du volume apparent spécifique d'une feuille unique et du volume apparent spécifique d'une feuille en liasse.
L'ISO 534:2005 n'est pas applicable au carton ondulé. En outre, la méthode a) n'est pas adaptée à des matériaux ayant un grammage supérieur à 225 g/m2.
Papir, karton in lepenka - Ugotavljanje debeline, gostote in specifičnega volumna (ISO 534:2005)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 534:2005
01-maj-2005
1DGRPHãþD
SIST EN 20534:2000
3DSLUNDUWRQLQOHSHQND8JRWDYOMDQMHGHEHOLQHJRVWRWHLQVSHFLILþQHJDYROXPQD
,62
Paper and board - Determination of thickness, density and specific volume (ISO
534:2005)
Papier und Pappe - Bestimmung der Dicke, der Dichte und des spezifischen Volumens
(ISO 534:2005)
Papier et carton - Détermination de l'épaisseur, de la masse volumique et du volume
spécifique (ISO 534:2005)
Ta slovenski standard je istoveten z: EN ISO 534:2005
ICS:
85.060 Papir, karton in lepenka Paper and board
SIST EN ISO 534:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 534:2005
---------------------- Page: 2 ----------------------
SIST EN ISO 534:2005
EUROPEAN STANDARD
EN ISO 534
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2005
ICS 85.060 Supersedes EN 20534:1993
English version
Paper and board - Determination of thickness, density and
specific volume (ISO 534:2005)
Papier et carton - Détermination de l'épaisseur, de la Papier und Pappe - Bestimmung der Dicke, der Dichte und
masse volumique et du volume spécifique (ISO 534:2005) des spezifischen Volumens (ISO 534:2005)
This European Standard was approved by CEN on 17 January 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 534:2005: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 534:2005
EN ISO 534:2005 (E)
Foreword
This document (EN ISO 534:2005) has been prepared by Technical Committee ISO/TC 6
"Paper, board and pulps" in collaboration with Technical Committee CEN/TC 172 "Pulp, paper
and board", the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by August 2005, and conflicting national
standards shall be withdrawn at the latest by August 2005.
This document supersedes EN 20534:1993.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 534:2005 has been approved by CEN as EN ISO 534:2005 without any
modifications.
2
---------------------- Page: 4 ----------------------
SIST EN ISO 534:2005
INTERNATIONAL ISO
STANDARD 534
Third edition
2005-02-01
Paper and board — Determination of
thickness, density and specific volume
Papier et carton — Détermination de l'épaisseur, de la masse
volumique et du volume spécifique
Reference number
ISO 534:2005(E)
©
ISO 2005
---------------------- Page: 5 ----------------------
SIST EN ISO 534:2005
ISO 534:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.