EN 10305-2:2010
(Main)Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes
Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes
This European Standard specifies the technical delivery conditions for welded cold drawn steel tubes of circular cross section for precision applications with specified outside diameter D <= 150 mm.
NOTE This document may also be applied to other types of cross section.
Tubes according to this document are characterized by having precisely defined tolerances on dimensions and a specified maximum surface roughness. Typical fields of application are in the automotive, furniture and general engineering industries.
Präzisionsstahlrohre - Technische Lieferbedingungen - Teil 2: Geschweißte kaltgezogene Rohre
Diese Europäische Norm legt die technischen Lieferbedingungen für geschweißte kaltgezogene Präzisionsrohre
aus Stahl mit kreisförmigem Querschnitt und einem Nennaußendurchmesser D ≤ 150 mm fest.
ANMERKUNG Dieses Dokument darf auch für andere Querschnitte angewendet werden.
Rohre nach diesem Dokument sind durch genau definierte Grenzabmaße und eine festgelegte maximale
Oberflächenrauheit charakterisiert. Typische Anwendungsgebiete sind der Fahrzeugbau, die Möbelindustrie
und der Allgemeine Maschinenbau.
Tubes de précision en acier - Conditions techniques de livraison - Partie 2 : Tubes soudés étirés à froid
La présente partie de l'EN 10305 spécifie les conditions techniques de livraison pour les tubes en acier soudés étirés à froid, de section circulaire, destinés aux applications de précision avec un diamètre extérieur spécifié D =< 150 mm.
NOTE Le présent document peut aussi s'appliquer à d'autres types de section.
Les tubes conformes au présent document se caractérisent par des tolérances dimensionnelles précises et par une rugosité maximale spécifiée. Les domaines typiques d'application se situent dans le secteur automobile, l'ameublement et l'ingénierie générale.
Jeklene cevi za precizno uporabo - Tehnični dobavni pogoji - 2. del: Varjene hladno vlečene cevi
Ta evropski standard opredeljuje tehnične pogoje dostave za varjene hladno vlečene cevi okroglega prereza za natančno uporabo z določenim zunanjim premerom ≤ 150 mm. OPOMBA: Ta dokument lahko velja tudi za druge vrste prerezov. Cevi so s tem dokumentom določene tako, da imajo natančno opredeljena odstopanja pri dimenzijah in določeno najvišjo površinsko hrapavost. Značilna področja uporabe so v avtomobilski, pohištveni in splošnih inženirskih industrijah.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Präzisionsstahlrohre - Technische Lieferbedingungen - Teil 2: Geschweißte kaltgezogene RohreTubes de précision en acier - Conditions techniques de livraison - Partie 2: Tubes soudés étirés à froidSteel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific useICS:Ta slovenski standard je istoveten z:EN 10305-2:2009SIST EN 10305-2:2010en01-marec-2010SIST EN 10305-2:2010SLOVENSKI
STANDARDSIST EN 10305-2:20031DGRPHãþD
SIST EN 10305-2:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10305-2
January 2010 ICS 77.140.75 Supersedes EN 10305-2:2002English Version
Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes
Tubes de précision en acier - Conditions techniques de livraison - Partie 2: Tubes soudés étirés à froid
Präzisionsstahlrohre - Technische Lieferbedingungen -Teil 2: Geschweißte kaltgezogene Rohre This European Standard was approved by CEN on 22 November 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10305-2:2010: ESIST EN 10305-2:2010
EN 10305-2:2010 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Terms and definitions .54Symbols .65Classification and designation .65.1Classification .65.2Designation .66Information to be supplied by the purchaser .66.1Mandatory information .66.2Options .66.3Example of an order .77Manufacturing process .87.1Steelmaking process .87.2Tube manufacture and delivery conditions .88Requirements .88.1General .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.