EN 12608-1:2016+A1:2020

Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 1: Non-coated PVC-U profiles with light coloured surfaces

This European Standard specifies the classifications, requirements and test methods for non-coated unplasticized poly(vinyl chloride) (PVC-U) profiles with light coloured surfaces intended to be used for the fabrication of windows and doors.
It is applicable to PVC-U profiles with the colorimetric co-ordinates measured on the visible surfaces, as follows:
-   L* ≥ 82 (chromaticity co-ordinate Y ≥ 60),
-   -2,5 ≤ a* ≤ 5,
-   -5 ≤ b* ≤ 15.
NOTE 1   For editorial reasons in this document the term "window" is used for window/door.
NOTE 2   Profiles made from PVC-U materials with reinforcements (e.g. glass fibres) are not part of this scope.

Profile aus weichmacherfreiem Polyvinylchlorid (PVC-U) zur Herstellung von Fenstern und Türen - Klassifizierung, Anforderungen und Prüfverfahren - Teil 1: Nicht beschichtete PVC-U Profile mit hellen Oberflächen

Diese Europäische Norm legt die Klassifizierungen, Anforderungen an und Prüfverfahren für nicht be-schichtete, helle Profile aus weichmacherfreiem Polyvinylchlorid (PVC U) zur Herstellung von Fenstern und Türen fest.
Diese Norm gilt für PVC U-Profile mit den folgenden Farbmaßzahlen, die auf sichtbaren Oberflächen ge¬messen wurden:
- L* ≥ 82 (Farbwertkoordinate Y ≥ 60),
- −2,5 ≤ a* ≤ 5,
- −5 ≤ b* ≤ 15.
ANMERKUNG 1 Aus redaktionellen Gründen wird in diesem Dokument die Benennung „Fenster“ für Fenster/Tür an¬gewendet.
ANMERKUNG 2 Profile aus PVC U-Materialien mit Verstärkungsstoffen (z. B. Glasfasern) liegen außerhalb dieses An¬wendungsbereichs.

Profilés de poly(chlorure de vinyle) non plastifié (PVC-U) pour la fabrication des fenêtres et des portes - Classification, exigences et méthodes d'essai - Partie 1 : Profilés en PVC-U non revêtus avec des faces de teinte claire

La présente Norme européenne spécifie les classifications, les exigences et les méthodes d’essai des profilés de poly(chlorure de vinyle) non plastifié (PVC U) non revêtus avec des faces de teinte claire destinés à être utilisés pour la fabrication des fenêtres et des portes.
Elle s’applique aux profilés en PVC U dont les coordonnées colorimétriques mesurées sur les surfaces visibles sont les suivantes :
-   L* ≥ 82 (coordonnée de chromaticité Y ≥ 60),
-   -2,5 ≤ a* ≤ 5,
-   -5 ≤ b* ≤ 15.
NOTE 1   Pour des raisons éditoriales, dans ce document le terme « fenêtre » est utilisé pour « fenêtre/porte ».
NOTE 2   Les profilés fabriqués à partir de matériau PVC U avec renforts (par exemple des fibres de verre) sont en dehors du présent domaine d’application.

Profili iz trdega polivinilklorida (PVC-U) za izdelavo oken in vrat - Razvrščanje, zahteve in preskusne metode - 1. del: Neprevlečeni PVC-U profili s svetlo površino

General Information

• Status: Published
• Publication Date: 18-Aug-2020
• ICS: 83.140.99 - Other rubber and plastics products
• ICS: 91.060.50 - Doors and windows
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249/WG 21 - Profiles for windows and doors
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 03-Sep-2021
• Ref Project: SIST EN 12608-1:2016+A1:2020 - Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 1: Non-coated PVC-U profiles with light coloured surfaces

Relations

• Merged From: EN 12608-1:2016 - Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 1: Non-coated PVC-U profiles with light coloured surfaces
• Effective Date: 19-Jan-2023
• Merged From: EN 12608-1:2016/FprA1 - Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 1: Non-coated PVC-U profiles with light coloured surfaces
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12608-1:2016+A1:2020
01-oktober-2020
Profili iz trdega polivinilklorida (PVC-U) za izdelavo oken in vrat - Razvrščanje,
zahteve in preskusne metode - 1. del: Neprevlečeni PVC-U profili s svetlo površino
Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and
doors - Classification, requirements and test methods - Part 1: Non-coated PVC-U
profiles with light coloured surfaces
Profile aus weichmacherfreiem Polyvinylchlorid (PVC-U) zur Herstellung von Fenstern
und Türen - Klassifizierung, Anforderungen und Prüfverfahren - Teil 1: Nicht
beschichtete PVC-U Profile mit hellen Oberflächen
Profilés de poly(chlorure de vinyle) non plastifié (PVC-U) pour la fabrication des fenêtres
et des portes - Classification, exigences et méthodes d'essai - Partie 1 : Profilés en PVC-
U non revêtus avec des faces de teinte claire
Ta slovenski standard je istoveten z: EN 12608-1:2016+A1:2020
ICS:
83.140.99 Drugi izdelki iz gume in Other rubber and plastics
polimernih materialov products
91.060.50 Vrata in okna Doors and windows
SIST EN 12608-1:2016+A1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 12608-1:2016+A1:2020

---------------------- Page: 2 ----------------------
SIST EN 12608-1:2016+A1:2020


EN 12608-1:2016+A1
EUROPEAN STANDARD

NORME EUROPÉENNE

August 2020
EUROPÄISCHE NORM
ICS 83.140.99; 91.060.50 Supersedes EN 12608-1:2016
English Version

Unplasticized poly(vinyl chloride) (PVC-U) profiles for the
fabrication of windows and doors - Classification,
requirements and test methods - Part 1: Non-coated PVC-U
profiles with light coloured surfaces
Profilés de poly(chlorure de vinyle) non plastifié (PVC- Profile aus weichmacherfreiem Polyvinylchlorid (PVC-
U) pour la fabrication des fenêtres et des portes - U) zur Herstellung von Fenstern und Türen -
Classification, exigences et méthodes d'essai - Partie 1 : Klassifizierung, Anforderungen und Prüfverfahren -
Profilés en PVC-U non revêtus avec des faces de teinte Teil 1: Nicht beschichtete PVC-U Profile mit hellen
claire Oberflächen
This European Standard was approved by CEN on 15 January 2016 and includes Amendment 1 approved by CEN on 15 June
2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12608-1:2016+A1:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 12608-1:2016+A1:2020
EN 12608-1:2016+A1:2020 (E)
Contents Page
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
3.1 General . 7
3.2 Profile definitions . 7
3.3 Geometrical definitions . 8
3.4 Material definitions .
...