EN 12608-2:2023

Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 2: PVC-U profiles covered with foils bonded with adhesives

This document specifies the classifications, requirements and test methods for unplasticized poly(vinyl chloride) (PVC-U) profiles covered with foils designed for external uses bonded with adhesives which are intended to be used for the fabrication of windows and doors.
NOTE 1   For editorial reasons, in this document, the term "window" is used for window/door.
NOTE 2   For the purpose of production control, test methods other than those specified in this document can be used.

Profile aus weichmacherfreiem Polyvinylchlorid (PVC-U) zur Herstellung von Fenstern und Türen - Klassifizierung, Anforderungen und Prüfverfahren - Teil 2: PVC-U-Profile mit durch Klebstoff kaschierte Folien

Dieses Dokument legt die Klassifizierungen, Anforderungen an und Prüfverfahren für folienkaschierte Profile aus weichmacherfreiem Polyvinylchlorid (PVC-U) zur Herstellung von Fenstern und Türen fest, deren Folie für den Außeneinsatz vorgesehen und mittels Klebstoff aufgebracht ist.
ANMERKUNG 1   Aus redaktionellen Gründen wird in diesem Dokument die Benennung „Fenster“ für Fenster/Tür angewendet.
ANMERKUNG 2   Für die Produktionskontrolle können andere Prüfverfahren als die in diesem Dokument festgelegten verwendet werden.

Profilés de poly(chlorure de vinyle) non plastifié (PVC-U) pour la fabrication des fenêtres et des portes - Classification, exigences et méthodes d'essai - Partie 2 : Profilés en PVC-U plaxés avec des films collés

Le présent document spécifie les classifications, les exigences et les méthodes d’essai des profilés de poly(chlorure de vinyle) non plastifié (PVC-U) recouverts de films conçus pour un usage extérieur, collés avec des adhésifs, qui sont destinés à être utilisés pour la fabrication de fenêtres et de portes.
NOTE 1   Pour des raisons éditoriales, dans ce document le terme « fenêtre » est utilisé pour « fenêtre/porte ».
NOTE 2   Pour les besoins du contrôle de la production, des méthodes d’essai autres que celles spécifiées dans le présent document peuvent être utilisées.

Profili iz nemehčanega polivinilklorida (PVC-U) za izdelavo oken in vrat - Razvrstitev, zahteve in preskusne metode - 2. del: PVC-U profili, prevlečeni s folijami, lepljenimi z lepili

Ta dokument določa razvrstitve, zahteve in preskusne metode za profile iz nemehčanega polivinilklorida (PVC-U), prevlečene s folijami za zunanjo uporabo, lepljene z lepili, ki so namenjeni za izdelavo oken in vrat.
OPOMBA 1:   Zaradi uredniških razlogov se izraz »okno« v tem dokumentu uporablja za okno/vrata.
OPOMBA 2:   Za namene nadzora proizvodnje je mogoče uporabiti preskusne metode, ki niso navedene v tem dokumentu.

General Information

• Status: Published
• Publication Date: 10-Oct-2023
• ICS: 83.140.99 - Other rubber and plastics products
• ICS: 91.060.50 - Doors and windows
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249/WG 21 - Profiles for windows and doors
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 11-Oct-2023
• Due Date: 14-Mar-2024
• Completion Date: 11-Oct-2023
• Ref Project: SIST EN 12608-2:2023 - Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 2: PVC-U profiles covered with foils bonded with adhesives

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12608-2:2023
01-december-2023
Profili iz nemehčanega polivinilklorida (PVC-U) za izdelavo oken in vrat -
Razvrstitev, zahteve in preskusne metode - 2. del: PVC-U profili, prevlečeni s
folijami, lepljenimi z lepili
Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and
doors - Classification, requirements and test methods - Part 2: PVC-U profiles covered
with foils bonded with adhesives
Profile aus weichmacherfreiem Polyvinylchlorid (PVC-U) zur Herstellung von Fenstern
und Türen - Klassifizierung, Anforderungen und Prüfverfahren - Teil 2: PVC-U-Profile mit
kaschierten Folien, die mittels Klebstoff aufgebracht sind
Profilés de poly(chlorure de vinyle) non plastifié (PVC-U) pour la fabrication des fenêtres
et des portes - Classification, exigences et méthodes d'essai - Partie 2 : Profilés en PVC-
U plaxés avec des films collés
Ta slovenski standard je istoveten z: EN 12608-2:2023
ICS:
83.140.99 Drugi izdelki iz gume in Other rubber and plastics
polimernih materialov products
91.060.50 Vrata in okna Doors and windows
SIST EN 12608-2:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 12608-2:2023

---------------------- Page: 2 ----------------------
SIST EN 12608-2:2023


EN 12608-2
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2023
EUROPÄISCHE NORM
ICS 83.140.99; 91.060.50
English Version

Unplasticized poly(vinyl chloride) (PVC-U) profiles for the
fabrication of windows and doors - Classification,
requirements and test methods - Part 2: PVC-U profiles
covered with foils bonded with adhesives
Profilés de poly(chlorure de vinyle) non plastifié (PVC- Profile aus weichmacherfreiem Polyvinylchlorid (PVC-
U) pour la fabrication des fenêtres et des portes - U) zur Herstellung von Fenstern und Türen -
Classification, exigences et méthodes d'essai - Partie 2 : Klassifizierung, Anforderungen und Prüfverfahren -
Profilés en PVC-U plaxés avec des films collés Teil 2: PVC-U-Profile mit kaschierten Folien, die mittels
Klebstoff aufgebracht sind
This European Standard was approved by CEN on 14 August 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12608-2:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 12608-2:2023
EN 12608-2:2023 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Classifications . 6
4.1 General. 6
4.2 Classification of main base profiles according to the wall thickness of the external walls . 7
4.3 Classification of main base profiles according to the resistance to impact by falling mass 7
4.4
...