EN IEC 62386-105:2020
(Main)Digital addressable lighting interface - Part 105: Particular requirements for control gear and control devices - Firmware Transfer
Digital addressable lighting interface - Part 105: Particular requirements for control gear and control devices - Firmware Transfer
IEC 62386-105:2020 applies to control gear and control devices. Typically, a bus unit according to IEC 62386 (all parts) contains firmware. There are circumstances where it might be necessary to change the firmware after production or shipping of the product. For example if the bus unit does not operate as intended. In such a case, a firmware update of a bus unit via the interface is beneficial. This firmware update process is primarily designed to be a bug fix process, not a feature extension process. Nevertheless the firmware update process can be used for feature extensions. But it is important that the risk of negative effects to the complete system is considered in detail.
Digital adressierbare Schnittstelle für die Beleuchtung - Teil 105: Besondere Anforderungen für Betriebs- und Steuergeräte - Firmware Übertragung
Interface d'éclairage adressable numérique - Partie 105: Exigences particulières pour appareillages et dispositifs de commande - Transfert du microprogramme
L’IEC 62386-105:2020 s’applique aux appareillages et dispositifs de commande. Un appareillage de bus conforme à l'IEC 62386 (toutes les parties) contient généralement un microprogramme. Il peut être nécessaire dans certaines circonstances de modifier ce microprogramme après la production ou l’expédition du produit, par exemple lorsque l’appareillage de bus ne fonctionne pas comme prévu. Dans ce cas, il est bénéfique de mettre à jour le microprogramme de l’appareillage de bus par l’intermédiaire de l’interface. Ce processus de mise à jour du microprogramme est principalement conçu comme un processus de correction des bogues et non comme un processus d'extension de caractéristiques. Le processus de mise à jour du microprogramme peut néanmoins être utilisé pour l’extension des caractéristiques. Il est important cependant d'étudier en détail le risque d’effets négatifs sur le système entier.
Digitalni naslovljivi vmesnik za razsvetljavo - 105. del: Posebne zahteve za krmilja in krmilne naprave - Prenos strojne programske opreme (IEC 62386-105:2020)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2020
Digitalni naslovljivi vmesnik za razsvetljavo - 105. del: Posebne zahteve za krmilja
in krmilne naprave - Prenos strojne programske opreme (IEC 62386-105:2020)
Digital addressable lighting interface - Part 105: Particular requirements for control gear
and control devices - Firmware Transfer (IEC 62386-105:2020)
Digital adressierbare Schnittstelle für die Beleuchtung - Teil 105: Besondere
Anforderungen für Betriebs- und Steuergeräte - Firmware Übertragung (IEC 62386-
105:2020)
Interface d'éclairage adressable numérique - Partie 105: Exigences particulières pour
appareillages et dispositifs de commande - Transfert du microprogramme (IEC 62386-
105:2020)
Ta slovenski standard je istoveten z: EN IEC 62386-105:2020
ICS:
29.140.50 Instalacijski sistemi za Lighting installation systems
razsvetljavo
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 62386-105
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2020
ICS 29.140.50; 29.140.99
English Version
Digital addressable lighting interface - Part 105: Particular
requirements for control gear and control devices - Firmware
Transfer
(IEC 62386-105:2020)
Interface d'éclairage adressable numérique - Partie 105: Digital adressierbare Schnittstelle für die Beleuchtung - Teil
Exigences particulières pour appareillages et dispositifs de 105: Besondere Anforderungen für Betriebs- und
commande - Transfert du microprogramme Steuergeräte - Firmware Übertragung
(IEC 62386-105:2020) (IEC 62386-105:2020)
This European Standard was approved by CENELEC on 2020-04-30. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62386-105:2020 E
European foreword
The text of document 34/675/FDIS, future edition 1 of IEC 62386-105, prepared by IEC/TC 34
"Lighting" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-01-30
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-04-30
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62386-105:2020 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 62386-101 2014 Digital addressable lighting interface - Part 101: EN 62386-101 2014
General requirements - System components
+ A1 2018 + A1 2018
IEC 62386-102 2014 Digital addressable lighting interface - Part 102: EN 62386-102 2014
General requirements - Control gear
+ A1 2018 + A1 2018
IEC 62386-103 2014 Digital addressable lighting interface - Part 103: EN 62386-103 2014
General requirements - Control devices
+ A1 2018 + A1 2018
IEC 62386-105 ®
Edition 1.0 2020-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Digital addressable lighting interface – –
Part 105: Particular requirements for control gear and control devices –
Firmware transfer
Interface d’éclairage adressable numérique – –
Partie 105: Exigences particulières pour appareillages et dispositifs de
commande – Transfert du microprogramme
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.50; 29.140.99 ISBN 978-2-8322-8020-1
– 2 – IEC 62386-105:2020 © IEC 2020
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 General . 8
4.1 General . 8
4.2 Transmitters and receivers in bus units . 8
4.3 Logical units in a bus unit . 8
5 Electrical specification . 8
6 Interface power supply . 8
7 Transmission protocol structure . 8
7.1 General . 8
7.2 32 bit forward frame encoding . 9
8 Timing . 9
9 Method of operation . 9
9.1 General . 9
9.2 Data transmission . 9
9.3 Duration . 9
9.4 Security . 10
9.5 Firmware update features . 10
9.6 Update process . 10
9.6.1 Start firmware update . 10
9.6.2 Data transfer . 10
9.6.3 Persistent variables during firmware update . 12
9.6.4 Firmware version number . 13
9.6.5 Firmware update in a system . 13
9.6.6 Error recovery. 13
10 Declaration of variables . 13
11 Definition of commands . 14
11.1 General . 14
11.2 Overview sheets . 14
11.3 Commands . 16
11.3.1 General . 16
11.3.2 Standard commands . 16
11.3.3 Data transfer commands . 17
Annex A (normative) Update file description . 19
Annex B (normative) CRC16 Calculation . 20
Annex C (informative) Firmware update process example . 21
Annex D (informative) Firmware update management check sheet . 23
Figure 1 – IEC 62386 graphical overview . 6
Figure C.1 – Example of a firmware update process . 21
IEC 62386-105:2020 © IEC 2020 – 3 –
Table 1 – 32-bit command frame encoding . 9
Table 2 – Firmware update features . 10
Table 3 – Block 0 definitions . 11
Table 4 – Block 1.n definitions . 12
Table 5 – Declaration of additional variables . 14
Table 6 – Standard commands for bus units with firmware update capability . 15
Table 7 – Data transfer commands for bus units with firmware update capability . 15
– 4 – IEC 62386-105:2020 © IEC 2020
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
DIGITAL ADDRESSABLE LIGHTING INTERFACE –
Part 105: Particular requirements for control gear and control devices –
Firmware transfer
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC
Publication(s)"). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use a
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.