EN 62386-101:2014
(Main)Digital addressable lighting interface - Part 101: General requirements - System components
Digital addressable lighting interface - Part 101: General requirements - System components
IEC 62386-101:2014 is applicable to system components in a bus system for control by digital signals of electronic lighting equipment. This electronic lighting equipment should be in line with the requirements of IEC 61347, with the addition of d.c. supplies. This second edition cancels and replaces the first edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) collection of all bus timing requirements defined in IEC 62386-101:2009 and IEC 62386-102:2009 and rework of the timing requirements to facilitate the preparation of a future control devices standard, taking particular account of the requirements for multi-master systems. The 10 % tolerances have been replaced by minimum and maximum timing values; b) integration of multi-master timing requirements; c) extension of the defined forward frames; d) addition of wiring requirements; e) improvement of the bus power supply requirements; f) improvement of test sequences and description of the test sequences in the form of pseudo code instead of flow charts.
Digital adressierbare Schnittstelle für die Beleuchtung - Teil 101: Allgemeine Anforderungen - Systemkomponenten
Interface d’éclairage adressable numérique - Partie 101: Exigences générales - Composants de système
L'IEC 62386-101:2014 est applicable aux composants de système dans un système à bus pour la commande par des signaux numériques des appareils d'éclairage électroniques. Il convient que ces appareils d'éclairage électroniques satisfassent aux exigences de l'IEC 61347, avec en plus les alimentations en courant continu. Cette deuxième édition annule et remplace la première édition parue en 2009. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) collecte de toutes les exigences relatives au cadencement des bus définies dans l'IEC 62386-101:2009 et l'IEC 62386-102:2009 et reformulation des exigences relatives au cadencement pour faciliter l'élaboration d'une future norme de dispositifs de commande, en tenant notamment compte des exigences relatives aux systèmes à plusieurs maîtres. Les tolérances de 10 % ont été remplacées par des valeurs de cadencement minimales et maximales; b) intégration des exigences de cadencement de plusieurs maîtres; c) extension des trames en avant définies; d) ajout d'exigences relatives au câblage; e) amélioration des exigences relatives à l'alimentation électrique du bus; f) amélioration des séquences d'essai et description des séquences d'essai sous la forme d'un pseudo-code au lieu d'organigrammes.
Digitalni naslovljivi vmesnik za razsvetljavo - 101. del: Splošne zahteve - Sistemske komponente (IEC 62386-101:2014)
Dopolnilo A1:2018 je dodatek k standardu SIST EN 62386-101:2015.
Ta del standarda IEC 62386 se uporablja za sistemske komponente v sistemu vodil za krmiljenje elektronske opreme za razsvetljavo z digitalnimi signali. Ta elektronska oprema za razsvetljavo bi morala biti v skladu z zahtevami iz standarda IEC 61347, z dodatkom enosmernega napajanja.
OPOMBA: Preskusi, obravnavani v tem standardu, so tipski preskusi. Zahteve za preskušanje posameznih enot vodil med proizvodnjo niso vključene.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2015
1DGRPHãþD
SIST EN 62386-101:2009
Digitalni naslovljivi vmesnik za razsvetljavo - 101. del: Splošne zahteve -
Sistemske komponente (IEC 62386-101:2014)
Digital addressable lighting interface - Part 101: General requirements - System
Components
Ta slovenski standard je istoveten z: EN 62386-101:2014
ICS:
29.140.50 Instalacijski sistemi za Lighting installation systems
razsvetljavo
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 62386-101
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2014
ICS 29.140; 29.140.50 Supersedes EN 62386-101:2009
English Version
Digital addressable lighting interface -
Part 101: General requirements - System components
(IEC 62386-101:2014)
Interface d'éclairage adressable numérique - Digital adressierbare Schnittstelle für die Beleuchtung -
Partie 101: Exigences générales - Composants de système Teil 101: Allgemeine Anforderungen - Systemkomponenten
(CEI 62386-101:2014) (IEC 62386-101:2014)
This European Standard was approved by CENELEC on 2014-12-12. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62386-101:2014 E
Foreword
The text of document 34C/1098/FDIS, future edition 2 of IEC 62386-101, prepared by
SC 34C "Auxiliaries for lamps" of IEC/TC 34 "Lamps and related equipment" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 62386-101:2014.
The following dates are fixed:
(dop) 2015-09-12
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2017-12-12
standards conflicting with the
document have to be withdrawn
This document supersedes EN 62386-101:2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62386-101:2014 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
CISPR 15 NOTE Harmonized as EN 55015.
IEC 61547 NOTE Harmonized as EN 61547.
1)
ISO/IEC 7498-1 NOTE Harmonized as EN ISO/IEC 7498-1 .
1)
Withdrawn publication.
- 3 - EN 62386-101:2014
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu
Publication Year Title EN/HD Year
IEC 61347 Series Lamp controlgear EN 61347 Series
IEC 61347-1 - Lamp controlgear - EN 61347-1 -
Part 1: General and safety requirements
IEC 62386-102 2014 Digital addressable lighting interface - EN 62386-102 2014
Part 102: General requirements - Control
gear
IEC 62386-103 2014 Digital addressable lighting interface - EN 62386-103 2014
Part 103: General requirements - Control
devices
IEC 61000-4-11 - Electromagnetic compatibility (EMC) - EN 61000-4-11 -
Part 4-11: Testing and measurement
techniques - Voltage dips, short
interruptions and voltage variations
immunity tests
IEC 62386-101 ®
Edition 2.0 2014-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Digital addressable lighting interface –
Part 101: General requirements – System components
Interface d’éclairage adressable numérique –
Partie 101: Exigences générales – Composants de système
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XC
ICS 29.140, 29.140.50 ISBN 978-2-8322-1910-2
– 2 – IEC 62386-101:2014 © IEC 2014
CONTENTS
FOREWORD . 7
INTRODUCTION . 9
1 Scope . 10
2 Normative references . 10
3 Terms and definitions . 10
4 General . 15
4.1 Purpose . 15
4.2 Version number . 15
4.3 System structure and architecture . 15
4.4 System information flow . 16
4.5 Command types . 16
4.6 Bus units . 17
4.6.1 Transmitters and receivers in bus units . 17
4.6.2 Control gear . 17
4.6.3 Input device . 17
4.6.4 Single master application controller . 17
4.6.5 Multi-master application controller . 18
4.6.6 Sharing an interface . 18
4.7 Bus power supply and load calculations . 19
4.7.1 Current demand coverage . 19
4.7.2 Maximum signal current compliance . 19
4.7.3 Simplified system calculation . 19
4.8 Wiring . 19
4.8.1 Wiring structure . 19
4.8.2 Wiring specification . 19
4.9 Insulation . 20
4.10 Earthing of the bus . 20
4.11 Power interruptions at bus units . 20
4.11.1 Different levels of power interruptions . 20
4.11.2 Short power interruptions of external power supply . 20
4.11.3 External power cycle . 21
4.11.4 Short interruptions of bus power supply . 21
4.11.5 Bus power down . 21
4.11.6 System start-up timing . 21
5 Electrical specification . 23
5.1 General . 23
5.2 Marking of the interface . 23
5.3 Capacitors between the interface and earth . 23
5.4 Signal voltage rating . 23
5.5 Signal current rating. 24
5.6 Marking of bus powered bus unit . 24
5.7 Signal rise time and fall time . 24
6 Bus power supply . 26
6.1 General . 26
6.2 Marking of the bus power supply terminals . 26
6.3 Capacitors between the interface and earth . 26
IEC 62386-101:2014 © IEC 2014 – 3 –
6.4 Voltage rating . 26
6.5 Current rating. 26
6.5.1 General current rating . 26
6.5.2 Single bus power supply current rating . 27
6.5.3 Integrated bus power supply current rating . 27
6.5.4 Dynamic behaviour of the bus power supply . 27
6.6 Bus power supply timing requirements . 28
6.6.1 Short power supply interruptions . 28
6.6.2 Short circuit behaviour . 29
7 Transmission protocol structure . 29
7.1 General . 29
7.2 Bit encoding . 29
7.2.1 Start bit and data bit encoding . 29
7.2.2 Stop condition encoding . 30
7.3 Frame description . 30
7.4 Frame types . 30
7.4.1 16 bit forward frame . 30
7.4.2 24 bit forward frame . 30
7.4.3 Reserved forward frame . 30
7.4.4 Backward frame .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.