EN 60745-2-11:2003/A1:2009
(Amendment)Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
This amendment enables EN 60745-2-11 to be read with EN 60745-1:2006 * Superseded by EN 60745-2-11:2010
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-11: Besondere Anforderungen für Sägen mit hin- und hergehendem Sägeblatt (Stichsägen und Säbelsägen)
Outils électroportatifs à moteur - Sécurité - Partie 2-11: Règles particulières pour les scies alternatives (scies sauteuses et scies sabres)
Električna ročna orodja - Varnost - 2-11. del: Posebne zahteve za povratne žage (vbodne in sabljaste žage) (IEC 60745-2-11:2003/A1:2008)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2009
(OHNWULþQDURþQDRURGMD9DUQRVWGHO 3RVHEQH]DKWHYH]DSRYUDWQHåDJH
YERGQHLQVDEOMDVWHåDJH ,(& $
Hand-held motor-operated electric tools - Safety -- Part 2-11: Particular requirements for
reciprocating saws (jig and sabre saws)
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit -- Teil 2-11: Besondere
Anforderungen für Sägen mit hin- und hergehendem Sägeblatt (Stichsägen und
Säbelsägen)
Outils électroportatifs à moteur - Sécurité -- Partie 2-11: Règles particulières pour les
scies alternatives (scies sauteuses et scies sabres)
Ta slovenski standard je istoveten z: EN 60745-2-11:2003/A1:2009
ICS:
25.080.60 Strojne žage Sawing machines
25.140.20 (OHNWULþQDRURGMD Electric tools
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 60745-2-11/A1
NORME EUROPÉENNE
May 2009
EUROPÄISCHE NORM
ICS 25.140.20
English version
Hand-held motor-operated electric tools -
Safety -
Part 2-11: Particular requirements
for reciprocating saws (jig and sabre saws)
(IEC 60745-2-11:2003/A1:2008)
Outils électroportatifs à moteur - Handgeführte motorbetriebene
Sécurité - Elektrowerkzeuge -
Partie 2-11: Règles particulières Sicherheit -
pour les scies alternatives Teil 2-11: Besondere Anforderungen
(scies sauteuses et scies sabres) für Sägen mit hin- und hergehendem
(CEI 60745-2-11:2003/A1:2008) Sägeblatt (Stichsägen und Säbelsägen)
(IEC 60745-2-11:2003/A1:2008)
This amendment A1 modifies the European Standard EN 60745-2-11:2003; it was approved by CENELEC on
2009-04-22. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60745-2-11:2003/A1:2009 E
Foreword
The text of document 61F/736/FDIS future amendment 1 to IEC 60745-2-11:2003, prepared by SC 61F
(transformed into TC 116, Safety of hand-held motor-operated electric tools), was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 60745-2-11:2003
on 2009-04-22.
With this amendment, this Part 2 is established on the basis of EN 60745-1:2006.
Main changes include editorial modifications to match with EN 60745-1:2006, addition of a new safety
warning to Clause 8: Marking and instructions, and clarifications in Annex K.
The following dates were fixed:
– latest date by which the amendment has to be
implemented at national level by publication of
an identical national standard or by endorsement (dop) 2010-02-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2012-05-01
__________
Endorsement notice
The text of amendment 1:2008 to the International Standard IEC 60745-2-11:2003 was approved by
CENELEC as an amendment to the European Standard without any modification.
__________
IEC 60745-2-11
Edition 2.0 2008-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Hand-held motor-operated electric tools – Safety –
Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
Outils électroportatifs à moteur – Sécurité –
Partie 2-11: Règles particulières pour les scies alternatives (scies sauteuses et
scies sabres)
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
E
CODE PRIX
ICS
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.