EN 61207-3:2002

Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers

Applies to the following main measuring methods: automatic null balance, thermomagnetic or mangetic wind and differential pressure or Quinke. Deals with ancillary units and applies to analyzers installed both indoors and outdoors. Indends to specify terminology and definitions, unify methods, specify tests and provide basic documents to support the application of standards of quality assurance ISO 9001, ISO 9002 and ISO 9003.

Gasanalysegeräte - Angabe zum Betriebsverhalten - Teil 3: Paramagnetische Sauerstoffanalysegeräte

Analyseurs de gaz - Expression des qualités de fonctionnement - Partie 3: Analyseurs d'oxygène paramagnétiques

S'applique à trois méthodes principales de mesure: équilibrage automatique à méthode de zéro "vent" thermomagnétique ou magnétique et pression différentielle ou méthode de "Quinke". Traite des unités auxiliaires et s'applique aux analyseurs installés à l'intérieur et à l'extérieur. A pour objet de spécifier la terminologie et les définitions, unifier les méthodes, spécifier les essais et de stipuler des documents de base permettant d'appliquer les normes d'assurance de la qualité ISO 9001, ISO 9002 et ISO 9003.

Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers

General Information

• Status: Withdrawn
• Publication Date: 23-May-2002
• Withdrawal Date: 30-Apr-2005
• ICS: 19.040 - Environmental testing
• ICS: 71.040.40 - Chemical analysis
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65B - IEC_SC_65B
• Parallel Committee: IEC/SC 65D - IEC_SC_65D
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 31-Jul-2022
• Completion Date: 31-Jul-2022
• Ref Project: SIST EN 61207-3:2002 - Gas analyzers - Expression of performance -- Part 3: Paramagnetic oxygen analyzers

Relations

• Replaces: EN 61207-3:1999 - Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers
• Effective Date: 28-Jan-2023
• Replaced By: EN IEC 61207-3:2019 - Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen analysers
• Effective Date: 23-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzersGasanalysegeräte - Angabe zum Betriebsverhalten -- Teil 3: Paramagnetische SauerstoffanalysegeräteAnalyseurs de gaz - Expression des qualités de fonctionnement -- Partie 3: Analyseurs d'oxygène paramagnétiquesGas analyzers - Expression of performance -- Part 3: Paramagnetic oxygen analyzers71.040.40Kemijska analizaChemical analysisICS:Ta slovenski standard je istoveten z:EN 61207-3:2002SIST EN 61207-3:2002en01-september-2002SIST EN 61207-3:2002SLOVENSKI
STANDARDSIST EN 61207-3:20011DGRPHãþD



SIST EN 61207-3:2002



EUROPEAN STANDARDEN 61207-3NORME EUROPÉENNEEUROPÄISCHE NORMMay 2002CENELECEuropean Committee for Electrotechnical StandardizationComité Européen de Normalisation ElectrotechniqueEuropäisches Komitee für Elektrotechnische NormungCentral Secretariat: rue de Stassart 35, B - 1050 Brussels© 2002 CENELEC -All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.Ref. No. EN 61207-3:2002 EICS 71.040.40; 19.040Supersedes EN 61207-3:1999English versionGas analyzers -Expression of performancePart 3: Paramagnetic oxygen analyzers(IEC 61207-3:2002)Analyseurs de gaz -Expression des qualitésde fonctionnementPartie 3: Analyseurs d'oxygèneparamagnétiques(CEI 61207-3:2002)Gasanalysegeräte -Angabe zum BetriebsverhaltenTeil 3: ParamagnetischeSauerstoffanalysegeräte(IEC 61207-3:2002)This European Standard was approved by CENELEC on 2002-05-01. CENELEC members are bound tocomply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained onapplication to the Central Secretariat or to any CENELEC member.This European Standard exists in three official versions (English, French, German). A version in any otherlanguage made by translation under the responsibility of a CENELEC member into its own language andnotified to the Central Secretariat has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.SIST EN 61207-3:2002



EN 61207-3:2002- 2 -ForewordThe text of document 65D/79/FDIS, future edition 2 of IEC 61207-3, prepared by SC 65D, Analyzingequipment, of IEC TC 65, Industrial-process measurement and control, was submitted to theIEC-CENELEC parallel vote and was approved by CENELEC as EN 61207-3 on 2002-05-01.This European Standard supersedes EN 61207-3:1999.The following dates were fixed:–latest date by which the EN has to be implementedat national level by publication of an identicalnational standard or by endorsement(dop)2003-02-01–latest date by which the national standards conflictingwith the EN have to be withdrawn(dow)2005-05-01This European Standard shall be used in conjunction with EN 61207-1.Annexes designated "normative" are part of the body of the standard.Annexes designated "informative" are given for information only.In this standard, annex ZA is normative and annexes A and B are informative.Annex ZA has been added by CENELEC.__________Endorsement noticeThe text of the International Standard IEC 61207-3:2002 was approved by CENELEC as a EuropeanStandard without any modification.__________SIST EN 61207-3:2002



- 3 -EN 61207-3:2002Annex ZA(normative)Normative references to international publicationswith their corresponding European publicationsThis European Standard incorporates by dated or undated reference, provisions from otherpublications. These normative references are cited at the appropriate places in the text and thepublications are listed hereafter. For dated references, subsequent amendments to or revisions of anyof these publications apply to this European Standard only when incorporated in it by amendment orrevision. For undated references the latest edition of the publication referred to applies (includingamendments).NOTEWhen an international publication has been modified by common modifications, indicated by (mod), the relevantEN/HD applies.PublicationYearTitleEN/HDYearIEC 60654-11993Industrial-process measurement andcontrol equipment - OperatingconditionsPart 1: Climatic conditionsEN 60654-11993IEC 611151992Expression of performance of samplehandling systems for process analyzersEN 611151993IEC 61207-11994Expression of performance of gasanalyzersPart 1: GeneralEN 61207-11994ISO 90012000Quality management systemsRequirementsEN ISO 90012000ISO 90021994Quality systems - Model for qualityassurance in production, installation andservicingEN ISO 90021994ISO 90031994Quality systems - Model for qualityassurance in final inspection an
...