EN IEC 60603-7:2020

Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors

IEC 60603-7:2020 is available as IEC 60603-7:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60603-7:2020 covers 8-way, unshielded, free and fixed connectors and is intended to specify the common dimensions (interface dimensions), mechanical, electrical and environmental characteristics and tests for the family of IEC 60603-7-x connectors. These connectors are intermateable (according to IEC 61076-1 level 2) and interoperable with other IEC 60603-7 series connectors. This fourth edition cancels and replaces the third edition, published in 2008, its Amendment 1:2011 and its Amendment 2:2019. It constitutes a technical revision. This edition includes the following significant technical change with respect to the previous edition: - Revised the definitions for intermateability and interoperability; added new definitions. - Corrected dimension line for dimension AZ2 in Figure 5. - Corrected dimension line for dimension F1 in Figure A.1. - Revised the reference to ISO/IEC 11801 to ISO/IEC 11801-1. - Added lower limiting temperature and upper limiting temperature definitions. - Revised Table 1 to Table 8 so the column order is Minimum-Nominal-Maximum dimensions (ascending order). - Corrected Table 7: Climatic category and Upper temperature values to 90 °C (to be consistent with the graph in Figure 10 and Note 1 in Figure 10). - Revised the wording in 8.2, contact resistance, for clarification. - Revised Figure 11 and Figure 12 and the wording in the Key below for clarification. - Removed the sentences under the figure in the Introduction. - Added Annex E.

Steckverbinder für elektronische Einrichtungen - Teil 7: Bauartspezifikation für ungeschirmte freie und feste Steckverbinder, 8polig

Connecteurs pour équipements électroniques - Partie 7: Spécification particulière pour les fiches et les embases non écrantées à 8 voies

IEC 60603-7:2020 est disponible sous forme de IEC 60603-7:2020 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L'IEC 60603-7:2020 couvre les connecteurs 8 voies, non couverts, libres et fixes et vise à spécifier les dimensions communes (dimensions d’interface), les caractéristiques mécaniques, électriques et environnementales et les tests pour la famille des connecteurs IEC 60603-7-x. Ces connecteurs sont intermates (selon le niveau 2 de l’IEC 61076-1) et interopérables avec d’autres connecteurs de la série IEC 60603-7. Cette quatrième édition annule et remplace la troisième édition, publiée en 2008, son amendement 1:2011 et son amendement 2:2019. Il s’agit d’une révision technique. Cette édition comprend les changements techniques importants suivants par rapport à l’édition précédente : - Révision des définitions de l’intermiabilité et de l’interopérabilité; a ajouté de nouvelles définitions. - Ligne de dimension corrigée pour la dimension AZ2 de la figure 5. - Ligne de dimension corrigée pour la dimension F1 de la figure A.1. - Révision de la référence à l’ISO/IEC 11801 à l’ISO/IEC 11801-1. - Ajout d’une température limite inférieure et de définitions de température limitantes supérieures. - Tableau 1 révisé au tableau 8 de sorte que l’ordre de colonne est des dimensions minimales-nominales-maximales (ordre croissant). - Tableau corrigé 7 : Catégorie climatique et valeurs de température supérieures à 90 °C (pour être compatible avec le graphique de la figure 10 et de la note 1 de la figure 10). - Révision du libellé en 8.2, résistance aux contacts, pour clarification. - Figure 11 et figure 12 révisées et le libellé de la clé ci-dessous pour clarification. - Suppression des phrases en vertu de la figure de l’Introduction. - Ajout de l’annexe E.

Konektorji za elektronsko opremo - 7. del: Podrobna specifikacija za 8-redne, nezaslonjene, proste in fiksne konektorje (IEC 60603-7:2020)

General Information

• Status: Published
• Publication Date: 19-Nov-2020
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: CLC/SR 48B - Connectors
• Drafting Committee: IEC/SC 48B - IEC_SC_48B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 20-Nov-2020
• Due Date: 30-Jun-2020
• Completion Date: 20-Nov-2020
• Ref Project: SIST EN IEC 60603-7:2021 - Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors (IEC 60603-7:2020)

Relations

• Replaces: EN 60603-7:2009 - Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors
• Effective Date: 23-Jan-2023
• Replaces: EN 60603-7:2009/A2:2019 - Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors
• Effective Date: 24-Nov-2020
• Replaces: EN 60603-7:2009/A1:2011 - Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors
• Effective Date: 24-Nov-2020

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 60603-7:2021
01-januar-2021
Nadomešča:
SIST EN 60603-7:2010
SIST EN 60603-7:2010/A1:2012
SIST EN 60603-7:2010/A2:2019
Konektorji za elektronsko opremo - 7. del: Podrobna specifikacija za 8-redne,
nezaslonjene, proste in fiksne konektorje (IEC 60603-7:2020)
Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded,
free and fixed connectors (IEC 60603-7:2020)
Steckverbinder für elektronische Einrichtungen - Teil 7: Bauartspezifikation für
ungeschirmte freie und feste Steckverbinder, 8polig (IEC 60603-7:2020)
Connecteurs pour équipements électroniques Partie 7 : Spécification particulière pour
les fiches et les embases non écrantées à 8 voies (IEC 60603-7:2020)
Ta slovenski standard je istoveten z: EN IEC 60603-7:2020
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
SIST EN IEC 60603-7:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 60603-7:2021

---------------------- Page: 2 ----------------------
SIST EN IEC 60603-7:2021


EUROPEAN STANDARD EN IEC 60603-7

NORME EUROPÉENNE

EUROPÄISCHE NORM
November 2020
ICS 31.220.10 Supersedes EN 60603-7:2009 and all of its amendments
and corrigenda (if any)
English Version
Connectors for electronic equipment - Part 7: Detail specification
for 8-way, unshielded, free and fixed connectors
(IEC 60603-7:2020)
Connecteurs pour équipements électroniques - Partie 7: Steckverbinder für elektronische Einrichtungen - Teil 7:
Spécification particulière pour les fiches et les embases non Bauartspezifikation für ungeschirmte freie und feste
écrantées à 8 voies Steckverbinder, 8polig
(IEC 60603-7:2020) (IEC 60603-7:2020)
This European Standard was approved by CENELEC on 2020-11-13. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 60603-7:2020 E

---------------------- Page: 3 ----------------------
SIST EN IEC 60603-7:2021
EN IEC 60603-7:2020 (E)
European foreword
The text of document 48B/2832/FDIS, future edition 4 of IEC 60603-7, prepared by SC 48B “Electrical
connectors” of IEC/TC 48 “Electrical connectors and mechanical structures for electrical and electronic
equipment” was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN IEC 60603-7:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021–08–13
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023–11–13
document have to be withdrawn
This document supersedes EN 60603-7:2009 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60603-7:2020 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60068-2-61:1991 NOTE Harmonized as EN 60068-2-61:1993 (not modified)
IEC 60603-7-1 NOTE Harmonized as EN 60603-7-1
IEC 60603-7-2 NOTE Harmonized as EN 60603-7-2
IEC 60603-7-3 NOTE Harmonized as EN 60603-7-3
IEC 60603-7-4 NOTE Harmonized as EN 60603-7-4
IEC 60603-7-5 NOTE Harmoni
...