iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 62135-1:2015/AC:2016-02

(Corrigendum)

Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation

Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation

IEC corrigendum

Widerstandsschweißeinrichtungen - Teil 1: Sicherheitsanforderungen für die Konstruktion, Herstellung und Errichtung

Matériels de soudage par résistance - Partie 1: Exigences de sécurité pour la conception, la fabrication et l’installation

Oprema za uporovno varjenje - 1. del: Varnostne zahteve za zasnovo, izdelavo in inštalacijo - Popravek AC

General Information

Status
Published
Publication Date
18-Feb-2016
ICS
25.160 - Welding, brazing and soldering
Technical Committee
CLC/TC 26 - Electric welding
Drafting Committee
CLC/TC 26 - Electric welding
Current Stage
6060 - Document made available - Publishing
Start Date
19-Feb-2016
Completion Date
19-Feb-2016
Directive
2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
2014/53/EU - Directive 2014/53/EU of The European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
Ref Project
SIST EN 62135-1:2015/AC:2016 - Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation

Relations

Corrects
EN 62135-1:2015 - Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation
Effective Date
23-Feb-2016

Buy Standard

EN 62135-1:2015/AC:2016EN 62135-1:2015/AC:2016
PreviousNext
Corrigendum
EN 62135-1:2015/AC:2016
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Oprema za uporovno varjenje - 1. del: Varnostne zahteve za zasnovo, izdelavo in inštalacijo - Popravek ACWiderstandsschweißeinrichtungen - Teil 1: Sicherheitsanforderungen für die Konstruktion, Herstellung und ErrichtungMatériels de soudage par résistance - Partie 1: Exigences de sécurité pour la conception, la fabrication et l’installationResistance welding equipment - Part 1: Safety requirements for design, manufacture and installation25.160.30Varilna opremaWelding equipmentICS:Ta slovenski standard je istoveten z:EN 62135-1:2015/AC:2016-02SIST EN 62135-1:2015/AC:2016en01-april-2016SIST EN 62135-1:2015/AC:2016SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 62135-1:2015/AC:2016-02
February 2016
ICS 25.160 English Version
Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation (IEC 62135-1:2015/COR1:2016)
Matériels de soudage par résistance - Partie 1: Exigences de sécurité pour la conception, la fabrication et l'installation(IEC 62135-1:2015/COR1:2016)
Widerstandsschweißeinrichtungen - Teil 1: Sicherheitsanforderungen für die Konstruktion, Herstellung und Errichtung (IEC 62135-1:2015/COR1:2016) This corrigendum becomes effective on 19 February 2016 for incorporation in the English language vers
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 60974-1:2022(Main)
Arc welding equipment - Part 1: Welding power sources
SIST EN IEC 60974-1:2023

This part of IEC 60974 is applicable to power sources for arc welding and allied processes designed for INDUSTRIAL AND PROFESSIONAL USE, and supplied by a voltage not exceeding 1 000 V, BATTERY supplied or driven by mechanical means. This document specifies safety and performance requirements of WELDING POWER SOURCES and PLASMA CUTTING SYSTEMS. This document is not applicable to limited duty arc welding and cutting power sources which are designed mainly for use by laymen and designed in accordance with IEC 60974-6. This document includes requirements for battery-powered WELDING POWER SOURCES and BATTERY packs, which are given in Annex O. This document is not applicable to testing of power sources during periodic maintenance or after repair. NOTE 1 Typical allied processes are electric arc cutting and arc spraying. NOTE 2 AC systems having a nominal voltage between 100 V and 1 000 V are given in Table 1 of IEC 60038:2009. NOTE 3 This document does not include electromagnetic compatibility (EMC) requirements.

  • Standard
    158 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60974-10:2021(Main)
Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements
SIST EN IEC 60974-10:2022

IEC 60974-10:2014 specifies a) applicable standards and test methods for radio-frequency (RF) emissions; b) applicable standards and test methods for harmonic current emission, voltage fluctuations and flicker; c) immunity requirements and test methods for continuous and transient, conducted and radiated disturbances including electrostatic discharges. This standard is applicable to equipment for arc welding and allied processes, including power sources and ancillary equipment, for example wire feeders, liquid cooling systems and arc striking and stabilizing devices. This third edition cancels and replaces the second edition published in 2007 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - inclusion of optional use of a decoupling network and a load outside the test chamber; - inclusion of an alternative test setup for portable equipment; - inclusion of test conditions for complex controls, liquid cooling systems and arc striking and stabilizing devices; - update of the applicable limits related to the updated reference to CISPR 11; - exclusion of the use of narrow band relaxations for RF emission limits; - update of the applicable limits for harmonics and flicker and inclusion of flow-charts related to the updated reference to IEC 61000-3-11 and IEC 61000-3-12; - update of the requirements for voltage dips related to the updated reference to IEC 61000-4-11 and IEC 61000-4-34; - update of the informative annex for installation and use; - inclusion of symbols to indicate the RF equipment class and restrictions for use.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60974-8:2021(Main)
Arc welding equipment - Part 8: Gas consoles for welding and plasma cutting systems
SIST EN IEC 60974-8:2022

IEC 60974-8:2021 is available as IEC 60974-8:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60974-8:2021 specifies safety and performance requirements for gas consoles intended to be used with combustible gases or oxygen. These gas consoles are designed to supply gases for use in arc welding, plasma cutting, gouging and allied processes in non-explosive atmospheres. The gas console can be external or internal to the power source enclosure. In the latter case, the power source shall meet the requirements of both IEC 60974-1 and this document. This third edition cancels and replaces the second edition, published in 2009. This edition constitutes a technical revision. The significant technical changes with respect to the previous edition are the following: - changes induced by the publication of IEC 60974-1:2017; - requirements for the rating plate as in IEC 60974-1:2017, Clause 15; - requirements for the instructions in 13.2. This part of IEC 60974 is to be used in conjunction with IEC 60974-1.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60974-11:2021(Main)
Arc welding equipment - Part 11: Electrode holders
SIST EN IEC 60974-11:2021

This part of IEC 60974 is applicable to ELECTRODE HOLDERS for manual metal arc welding with electrodes up to 10 mm in diameter. It is not applicable to ELECTRODE HOLDERS for underwater welding. This document specifies safety and performance requirements of ELECTRODE HOLDERS.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60974-3:2019(Main)
Arc welding equipment - Part 3: Arc striking and stabilizing devices
SIST EN IEC 60974-3:2020

This part of IEC 60974 specifies safety requirements for industrial and professional ARC STRIKING and ARC STABILIZING DEVICES used in arc welding and allied processes. This document is applicable to ARC STRIKING and STABILIZING DEVICES which are stand-alone (separate from the welding equipment) or built in (housed in a single enclosure with other arc welding equipment). NOTE 1 Typical allied processes are, for example, plasma arc cutting and arc spraying. NOTE 2 This document does not include electromagnetic compatibility (EMC) requirements.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60974-7:2019(Main)
Arc welding equipment - Part 7: Torches
SIST EN IEC 60974-7:2020

This part of IEC 60974 specifies safety and construction requirements for TORCHES used for arc welding and allied processes. This document is applicable to MANUAL, MECHANICALLY GUIDED, AIR-COOLED, LIQUID-COOLED, MOTORIZED, SPOOL-ON and FUME EXTRACTION TORCHES. In this document, a TORCH consists of the TORCH BODY, the CABLE-HOSE ASSEMBLY and other components. This document is also applicable to a CABLE-HOSE ASSEMBLY connected between a power source and ancillary equipment. This document is not applicable to electrode holders for manual metal arc welding or air-arc cutting/gouging. NOTE 1 Typical allied processes are electric arc cutting and arc spraying. NOTE 2 Other components are listed in Table A.1. NOTE 3 In this document, all procedures and requirements are the same for "TORCHES" and "GUNS". For convenience, the term "TORCH" is used in the following text.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60974-2:2019(Main)
Arc welding equipment - Part 2: Liquid cooling systems
SIST EN IEC 60974-2:2020

This part of IEC 60974 specifies safety and construction requirements for industrial and professional LIQUID COOLING SYSTEMS used in arc welding and allied processes to cool torches. This document is applicable to LIQUID COOLING SYSTEMS which are stand-alone (separate from the welding equipment) or built-in (housed in a single enclosure with other welding equipment). This document is not applicable to refrigerated cooling systems. NOTE 1 Typical allied processes are electric arc cutting and arc spraying. NOTE 2 This part of IEC 60974 does not include electromagnetic compatibility (EMC) requirements that are given in IEC 60974-10.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60974-5:2019(Main)
Arc welding equipment - Part 5: Wire feeders
SIST EN IEC 60974-5:2020

This part of IEC 60974 specifies safety and performance requirements for industrial and professional equipment used in arc welding and allied processes to feed filler wire. This document is applicable to WIRE FEEDERS and to WIRE-FEED CONTROLS that are stand-alone (separate from the welding equipment), housed together in a single enclosure or housed in a single enclosure with other welding equipment. The WIRE FEEDER can be suitable for manually or mechanically guided torches. This document is not applicable to spool-on torches, which are covered by IEC 60974-7. NOTE 1 Typical allied processes are electric arc cutting and arc spraying. NOTE 2 This document does not include electromagnetic compatibility (EMC) requirements, which are given in IEC 60974-10.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60974-1:2018/A1:2019(Amendment)
Arc welding equipment - Part 1: Welding power sources
SIST EN IEC 60974-1:2018/A1:2020
  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60974-1:2018(Main)
Arc welding equipment - Part 1: Welding power sources
SIST EN IEC 60974-1:2018

IEC 60974-1:2012 is applicable to power sources for arc welding and allied processes designed for industrial and professional use, and supplied by a voltage not exceeding 1 000 V, or driven by mechanical means. This part of IEC 60974 specifies safety and performance requirements of welding power sources and plasma cutting systems. This fourth edition cancels and replaces the third edition published in 2005 and constitutes a technical revision. The significant changes with respect to the previous edition are the following: - the heating test shall be carried out at ambient temperature of 40 °C (see 5.1); - new Figure 1 summarizes example of insulation requirements; - creepage distances for pollution degree 4 are no longer valid (see Table 2); - insulation requirements for Class II equipment are defined (see Table 3); - dielectric test voltage interpolation restriction lower limit is changed to 220 V and interpolation for control and welding circuit is clarified (see Table 4); - water test is clarified by suppression of visual inspection (see 6.2.1); - isolation requirements of the supply circuit and the welding circuit are moved in protection against electric shock in normal service (see 6.2.4); - touch current in normal service and in single fault condition requirements are changed (see 6.2.5, 6.2.6 and 6.3.6); - maximum temperature for insulation systems are reviewed in accordance with current edition of IEC 60085 (see Table 6); - limits of temperature rise for external surfaces are updated depending of unintentional contact period as defined in ISO 13732-1 (see Table 7); - loading test is completed by a dielectric test (see 7.4); - conformity test for tolerance to supply voltage fluctuation is clarified (see 10.1); - marking of terminals is limited to external protective conductor and three-phase equipment terminals (see 10.4); - usage of hazard reducing device is clarified (see 11.1); - requirements for control circuits are changed (see Clause 12); - impact test is clarified (see 14.2.2); - environmental parameters are completed (see Annex M).

  • Standard
    151 pages
    English language
    sale 10% off
    e-Library read for
    1 day