CLC/TC 26 - Electric welding

IEC 62822-3:2023 applies to equipment for resistance welding and allied processes designed for occupational use by professionals and for use by laymen. More generally, this document covers equipment for which the welding current flows in an electrical circuit whose geometry cannot be changed and regardless of the technology of the current generator (for example LF-AC, MF-DC for spot or seam welding or capacitive discharge used for stud welding). This second edition cancels and replaces the first edition published in 2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) inclusion of the uncertainties in the results of the assessment; b) simplification of the methods of exposure assessment.

This part of IEC 60974 is applicable to power sources for arc welding and allied processes designed for INDUSTRIAL AND PROFESSIONAL USE, and supplied by a voltage not exceeding 1 000 V, BATTERY supplied or driven by mechanical means. This document specifies safety and performance requirements of WELDING POWER SOURCES and PLASMA CUTTING SYSTEMS. This document is not applicable to limited duty arc welding and cutting power sources which are designed mainly for use by laymen and designed in accordance with IEC 60974-6. This document includes requirements for battery-powered WELDING POWER SOURCES and BATTERY packs, which are given in Annex O. This document is not applicable to testing of power sources during periodic maintenance or after repair. NOTE 1 Typical allied processes are electric arc cutting and arc spraying. NOTE 2 AC systems having a nominal voltage between 100 V and 1 000 V are given in Table 1 of IEC 60038:2009. NOTE 3 This document does not include electromagnetic compatibility (EMC) requirements.

Common Mod in order to cover EU Ecodesign requirements on IEC 60974-1 It is applicable to power sources for arc welding and allied processes designed for INDUSTRIAL AND PROFESSIONAL USE, and supplied by a voltage not exceeding 1 000 V, BATTERY supplied or driven by mechanical means. This document specifies safety and performance requirements of WELDING POWER SOURCES and PLASMA CUTTING SYSTEMS. This document is not applicable to limited duty arc welding and cutting power sources which are designed mainly for use by laymen and designed in accordance with IEC 60974-6. This document includes requirements for battery-powered WELDING POWER SOURCES and BATTERY packs, which are given in Annex O. This document is not applicable to testing of power sources during periodic maintenance or after repair. NOTE 1 Typical allied processes are electric arc cutting and arc spraying. NOTE 2 AC systems having a nominal voltage between 100 V and 1 000 V are given in Table 1 of IEC 60038:2009. NOTE 3 This document does not include electromagnetic compatibility (EMC) requirements.

This part of IEC 60974 specifies safety and construction requirements for TORCHES used for arc welding and allied processes. This document is applicable to MANUAL, MECHANICALLY GUIDED, AIR-COOLED, LIQUID-COOLED, MOTORIZED, SPOOL-ON and FUME EXTRACTION TORCHES. In this document, a TORCH consists of the TORCH BODY, the CABLE-HOSE ASSEMBLY and other components. This document is also applicable to a CABLE-HOSE ASSEMBLY connected between a power source and ancillary equipment. This document is not applicable to electrode holders for manual metal arc welding or air-arc cutting/gouging. NOTE 1 Typical allied processes are electric arc cutting and arc spraying. NOTE 2 Other components are listed in Table A.1. NOTE 3 In this document, all procedures and requirements are the same for "TORCHES" and "GUNS". For convenience, the term "TORCH" is used in the following text.

This part of IEC 60974 specifies safety requirements for industrial and professional ARC STRIKING and ARC STABILIZING DEVICES used in arc welding and allied processes. This document is applicable to ARC STRIKING and STABILIZING DEVICES which are stand-alone (separate from the welding equipment) or built in (housed in a single enclosure with other arc welding equipment). NOTE 1 Typical allied processes are, for example, plasma arc cutting and arc spraying. NOTE 2 This document does not include electromagnetic compatibility (EMC) requirements.

This part of IEC 60974 specifies safety and performance requirements for industrial and professional equipment used in arc welding and allied processes to feed filler wire. This document is applicable to WIRE FEEDERS and to WIRE-FEED CONTROLS that are stand-alone (separate from the welding equipment), housed together in a single enclosure or housed in a single enclosure with other welding equipment. The WIRE FEEDER can be suitable for manually or mechanically guided torches. This document is not applicable to spool-on torches, which are covered by IEC 60974-7. NOTE 1 Typical allied processes are electric arc cutting and arc spraying. NOTE 2 This document does not include electromagnetic compatibility (EMC) requirements, which are given in IEC 60974-10.

This part of IEC 60974 specifies safety and construction requirements for industrial and professional LIQUID COOLING SYSTEMS used in arc welding and allied processes to cool torches. This document is applicable to LIQUID COOLING SYSTEMS which are stand-alone (separate from the welding equipment) or built-in (housed in a single enclosure with other welding equipment). This document is not applicable to refrigerated cooling systems. NOTE 1 Typical allied processes are electric arc cutting and arc spraying. NOTE 2 This part of IEC 60974 does not include electromagnetic compatibility (EMC) requirements that are given in IEC 60974-10.

IEC corrected version

IEC 60974-10:2014 specifies a) applicable standards and test methods for radio-frequency (RF) emissions; b) applicable standards and test methods for harmonic current emission, voltage fluctuations and flicker; c) immunity requirements and test methods for continuous and transient, conducted and radiated disturbances including electrostatic discharges. This standard is applicable to equipment for arc welding and allied processes, including power sources and ancillary equipment, for example wire feeders, liquid cooling systems and arc striking and stabilizing devices. This third edition cancels and replaces the second edition published in 2007 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - inclusion of optional use of a decoupling network and a load outside the test chamber; - inclusion of an alternative test setup for portable equipment; - inclusion of test conditions for complex controls, liquid cooling systems and arc striking and stabilizing devices; - update of the applicable limits related to the updated reference to CISPR 11; - exclusion of the use of narrow band relaxations for RF emission limits; - update of the applicable limits for harmonics and flicker and inclusion of flow-charts related to the updated reference to IEC 61000-3-11 and IEC 61000-3-12; - update of the requirements for voltage dips related to the updated reference to IEC 61000-4-11 and IEC 61000-4-34; - update of the informative annex for installation and use; - inclusion of symbols to indicate the RF equipment class and restrictions for use.

IEC 62135-2:2020 is available as IEC 62135-2:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62135-2:2020 is applicable to equipment for resistance welding and allied processes which are connected to mains supplies with rated voltages up to 1 000 V AC RMS. This document does not define safety requirements. This third edition cancels and replaces the second edition published in 2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - update of the applicable limits related to the updated references; - implementation of radiated magnetic field requirements.

IEC 60974-8:2021 is available as IEC 60974-8:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60974-8:2021 specifies safety and performance requirements for gas consoles intended to be used with combustible gases or oxygen. These gas consoles are designed to supply gases for use in arc welding, plasma cutting, gouging and allied processes in non-explosive atmospheres. The gas console can be external or internal to the power source enclosure. In the latter case, the power source shall meet the requirements of both IEC 60974-1 and this document. This third edition cancels and replaces the second edition, published in 2009. This edition constitutes a technical revision. The significant technical changes with respect to the previous edition are the following: - changes induced by the publication of IEC 60974-1:2017; - requirements for the rating plate as in IEC 60974-1:2017, Clause 15; - requirements for the instructions in 13.2. This part of IEC 60974 is to be used in conjunction with IEC 60974-1.

IEC 60974-14:2018(E) specifies requirements for the verification of arc welding and external monitoring equipment. This document also serves for practical implementation of the verification procedure for arc welding equipment. This document can be applied at the time of installation and any other times or intervals the user deems appropriate to ensure the equipment is capable of operating to the manufacturer’s specification or other specifications deemed applicable by the user.

IEC 62822-1:2016 is a product family standard, applies to equipment for resistance welding, arc welding and allied processes designed for occupational use by professionals and for use by laymen.

IEC 60974-1:2012 is applicable to power sources for arc welding and allied processes designed for industrial and professional use, and supplied by a voltage not exceeding 1 000 V, or driven by mechanical means. This part of IEC 60974 specifies safety and performance requirements of welding power sources and plasma cutting systems. This fourth edition cancels and replaces the third edition published in 2005 and constitutes a technical revision. The significant changes with respect to the previous edition are the following: - the heating test shall be carried out at ambient temperature of 40 °C (see 5.1); - new Figure 1 summarizes example of insulation requirements; - creepage distances for pollution degree 4 are no longer valid (see Table 2); - insulation requirements for Class II equipment are defined (see Table 3); - dielectric test voltage interpolation restriction lower limit is changed to 220 V and interpolation for control and welding circuit is clarified (see Table 4); - water test is clarified by suppression of visual inspection (see 6.2.1); - isolation requirements of the supply circuit and the welding circuit are moved in protection against electric shock in normal service (see 6.2.4); - touch current in normal service and in single fault condition requirements are changed (see 6.2.5, 6.2.6 and 6.3.6); - maximum temperature for insulation systems are reviewed in accordance with current edition of IEC 60085 (see Table 6); - limits of temperature rise for external surfaces are updated depending of unintentional contact period as defined in ISO 13732-1 (see Table 7); - loading test is completed by a dielectric test (see 7.4); - conformity test for tolerance to supply voltage fluctuation is clarified (see 10.1); - marking of terminals is limited to external protective conductor and three-phase equipment terminals (see 10.4); - usage of hazard reducing device is clarified (see 11.1); - requirements for control circuits are changed (see Clause 12); - impact test is clarified (see 14.2.2); - environmental parameters are completed (see Annex M).

This part of IEC 60974 is applicable to WELDING CURRENT RETURN CLAMPS for arc welding processes, designed to make an electrical connection to the workpiece without using tools. This document is not applicable to WELDING CURRENT RETURN CLAMPS for underwater welding and plasma cutting. This document specifies safety and performance requirements of WELDING CURRENT RETURN CLAMPS. This document does not specify requirements for welding cables.

This part of IEC 60974 is applicable to ELECTRODE HOLDERS for manual metal arc welding with electrodes up to 10 mm in diameter. It is not applicable to ELECTRODE HOLDERS for underwater welding. This document specifies safety and performance requirements of ELECTRODE HOLDERS.

NEW!IEC 60974-9:2018 is available as IEC 60974-9:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60974-9:2018 is applicable to requirements for installation and instructions for use of equipment for arc welding and allied processes designed in accordance with safety requirements of IEC 60974-1, IEC 60974-6 or equivalent. This standard cancels and replaces the first edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - addition of a new Clause 8; - addition of interpolation details in Table 1.

IEC 62822-3:2017 applies to equipment for resistance welding and allied processes designed for occupational use by professionals and for use by laymen. This document specifies procedures for the assessment of human exposure to magnetic fields produced by resistance welding equipment. It covers non-thermal biological effects in the frequency range from 0 Hz to 10 MHz and defines standardized test scenarios.

IEC 62822-2:2016 applies to equipment for arc welding and allied processes designed for occupational use by professionals and for use by laymen.

IEC 60974-4:2010 specifies test procedures for periodic inspection and, after repair, to ensure electrical safety. These test procedures are also applicable for maintenance. This standard is applicable to power sources for arc welding and allied processes designed in accordance with IEC 60974-1 or IEC 60974-6. Stand-alone ancillary equipment designed in accordance with other part of IEC 60974 may be tested in accordance with relevant requirement of this part of IEC 60974. This second edition cancels and replaces the first edition published in 2006. It constitutes a technical revision. The main significant technical changes with respect to the previous edition are the following: - title is amended; - scope is extended to equipment designed in accordance with IEC 60974-6; - complementary instructions from the manufacturer shall be followed; - qualification of test personnel is clarified (see 4.1); - plasma cutting power sources are excluded from no-load voltage test (see 5.6); - voltage reducing device functional test is simplified (see 6.3); - supply voltage is recorded in test report (see 7.1).

IEC 60974-6:2015 specifies safety and performance requirements applicable to limited duty arc welding and cutting power sources and auxiliaries designed for use by laymen. Electrically powered equipment is intended to be connected to the single phase public low-voltage supply system. Engine driven power sources cannot exceed output power of 7,5 kVA. This third edition cancels and replaces the second edition published in 2010. It constitutes a technical revision. The main significant technical changes with respect to the previous edition are the following: - modified measurement conditions (see 7.3.1); - improved values for temperature limits according to the class of insulation (see Table 1); - improved maximum temperature limits (see Table 2); - deleted overload test. This publication is to be read in conjunction with IEC 60974-1:2012.

IEC 62135-1:2015(E) applies to equipment for resistance welding and allied processes and includes single and multiple welding stations which may be manually or automatically loaded and/or started. This second edition cancels and replaces the first edition published in 2008. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - creepage distances for pollution degree 4 are no longer valid (see Table 2); - insulation requirements for Class II equipment are defined (see Table 3); - dielectric test voltage interpolation restriction lower limit is changed to 220 V and interpolation for control and welding circuit is clarified (see Table 4); - maximum temperature for insulation systems are reviewed in accordance with current edition of IEC 60085 (see Table 7); - marking of terminals is defined (see 10.3); - table for nominal voltages of supply networks is changed adopting Table B.2 of IEC 60664-1:2007 in place of the Table B.1 values referenced in the previous edition to provide for equipment to be connected to both earthed and unearthed systems. The change impacts the creepage and clearance distance requirements for some supply voltage ratings (see Annex A); - touch current in fault condition are measurement procedures are clarified (see 6.4.4 and Annex C); - welding circuit touch current is defined (see 6.2.6); - touch current in normal condition are clarified and moved in protection against electric shock in normal service (see 6.3.7); - heating test conditions are clarified (see 7.1.1); - external surface temperature rise limitation is changed (see 7.3.2).

IEC corrigendum

IEC 60974-12:2011 is applicable to coupling devices for cables used in arc welding and allied processes, designed for connection and disconnection without using tools. This part of IEC 60974 specifies safety and performance requirements of coupling devices. This part of IEC 60974 is not applicable to coupling devices for underwater welding. This third edition cancels and replaces the second edition published in 2005. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - dimensions given in Annex A become normative, - designation is based on the range of cross-sectional area of the welding cable intended to be connected.

IEC 60974-8:2009 specifies safety and performance requirements for gas consoles intended to be used with combustible gases or oxygen. These gas consoles are designed to supply gases for use in arc welding, plasma cutting, gouging and allied processes in non-explosive atmospheres. The significant changes with respect to the previous edition are the following: - removal of intrinsically safe design; - introduction of gas mixing function; - new informative rating plate layout; - induced changes due to publication of IEC 60974-1, edition 3.

IEC 62135-2:2015 is applicable to equipment for resistance welding and allied processes which are connected to mains supplies with rated voltages up to 1 000 V a.c. r.m.s. This standard does not define safety requirements. This second edition cancels and replaces the first edition published in 2007 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - update of the applicable limits related to the updated reference to CISPR 11; - exclusion of the use of narrow band relaxations for RF emission limits; - update of the applicable limits for harmonics and flicker related to the updated reference to IEC 61000-3-11 and IEC 61000-3-12; - update of the requirements for voltage dips related to the updated reference to IEC 61000-4-11 and IEC 61000-4-34; - inclusion of symbols to indicate the RF equipment class and restrictions for use; - inclusion of EM field immunity test for frequency from 1,4 GHz to 2,7 GHz; - inclusion of emission limits for class B resistance welding equipment magnetic fields between 150 kHz and 30 MHz.

IEC 60974-10:2014 specifies a) applicable standards and test methods for radio-frequency (RF) emissions; b) applicable standards and test methods for harmonic current emission, voltage fluctuations and flicker; c) immunity requirements and test methods for continuous and transient, conducted and radiated disturbances including electrostatic discharges. This standard is applicable to equipment for arc welding and allied processes, including power sources and ancillary equipment, for example wire feeders, liquid cooling systems and arc striking and stabilizing devices. This third edition cancels and replaces the second edition published in 2007 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - inclusion of optional use of a decoupling network and a load outside the test chamber; - inclusion of an alternative test setup for portable equipment; - inclusion of test conditions for complex controls, liquid cooling systems and arc striking and stabilizing devices; - update of the applicable limits related to the updated reference to CISPR 11; - exclusion of the use of narrow band relaxations for RF emission limits; - update of the applicable limits for harmonics and flicker and inclusion of flow-charts related to the updated reference to IEC 61000-3-11 and IEC 61000-3-12; - update of the requirements for voltage dips related to the updated reference to IEC 61000-4-11 and IEC 61000-4-34; - update of the informative annex for installation and use; - inclusion of symbols to indicate the RF equipment class and restrictions for use.

IEC 60974-3:2013 specifies safety requirements for industrial and professional arc striking and arc stabilizing devices used in arc welding and allied processes. This part of IEC 60974 is applicable to stand-alone units which may be connected to a separate welding power source or one where the welding power source and the arc striking and arc stabilizing device are housed in a single enclosure. This third edition cancels and replaces the second edition published in 2007 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - changes induced by the publication of IEC 60974-1:2012.

IEC 60974-5:2013 specifies safety and performance requirements for industrial and professional equipment used in arc welding and allied processes to feed filler wire. This third edition cancels and replaces the second edition published in 2007 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - changes induced by the publication of IEC 60974-1:2012; - addition of a new symbol for hot surface (as specified in Clause 9); - determination of the maximum load in accordance with 10.7.

IEC 60974-2:2013 specifies safety and construction requirements for industrial and professional liquid cooling systems used in arc welding and allied processes to cool torches. This part of IEC 60974 is applicable to stand-alone liquid cooling systems that are either connected to a separate welding power source or built into the welding power source enclosure. This part of IEC 60974 is not applicable to refrigerated cooling systems. This third edition cancels and replaces the first edition published in 2007 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - changes induced by the publication of IEC 60974-1:2012; - addition of a liquid temperature fixed to 65 °C during the heating test in order to allow testing at different ambient air temperature (see 10 d)); - correction factor of cooling power at 40 °C required in instruction manual (see 12.1 o)).

IEC 60974-7:2013 specifies safety and construction requirements for torches for arc welding and allied processes. This part of IEC 60974 is applicable to manual, mechanically guided, air-cooled, liquid-cooled, motorized, spool-on and fume extraction torches. In this part of IEC 60974, a torch consists of the torch body, the cable-hose assembly and other components. This part of IEC 60974 is also applicable to a cable-hose assembly connected between a power source and ancillary equipment. This part of IEC 60974 is not applicable to electrode holders for manual metal arc welding or air-arc cutting/gouging. This third edition cancels and replaces the second edition published in 2007 and constitutes a technical revision. The significant changes with respect to the previous edition are listed below: - new requirement for degree of protection of torch coupling device (see Table 1); - scope is extended to cable-hose assembly connected between a power source and ancillary equipment (see Clause 1); - torch parts, as recommended by the manufacturer, are included in the safe plasma cutting system design (see 7.4.2); - new flammability requirement for handle material (see 11.3).

IEC 60974-1:2012 is applicable to power sources for arc welding and allied processes designed for industrial and professional use, and supplied by a voltage not exceeding 1 000 V, or driven by mechanical means. This part of IEC 60974 specifies safety and performance requirements of welding power sources and plasma cutting systems. This fourth edition cancels and replaces the third edition published in 2005 and constitutes a technical revision. The significant changes with respect to the previous edition are the following: - the heating test shall be carried out at ambient temperature of 40 °C (see 5.1); - new Figure 1 summarizes example of insulation requirements; - creepage distances for pollution degree 4 are no longer valid (see Table 2); - insulation requirements for Class II equipment are defined (see Table 3); - dielectric test voltage interpolation restriction lower limit is changed to 220 V and interpolation for control and welding circuit is clarified (see Table 4); - water test is clarified by suppression of visual inspection (see 6.2.1); - isolation requirements of the supply circuit and the welding circuit are moved in protection against electric shock in normal service (see 6.2.4); - touch current in normal service and in single fault condition requirements are changed (see 6.2.5, 6.2.6 and 6.3.6); - maximum temperature for insulation systems are reviewed in accordance with current edition of IEC 60085 (see Table 6); - limits of temperature rise for external surfaces are updated depending of unintentional contact period as defined in ISO 13732-1 (see Table 7); - loading test is completed by a dielectric test (see 7.4); - conformity test for tolerance to supply voltage fluctuation is clarified (see 10.1); - marking of terminals is limited to external protective conductor and three-phase equipment terminals (see 10.4); - usage of hazard reducing device is clarified (see 11.1); - requirements for control circuits are changed (see Clause 12); - impact test is clarified (see 14.2.2); - environmental parameters are completed (see Annex M).

IEC 60974-13:2011 is applicable to clamps for arc welding processes, designed to make an electrical connection to the workpiece without using tools. This part of IEC 60974 is not applicable to clamps for underwater welding and plasma cutting. This part of IEC 60974 specifies safety and performance requirements of welding clamps. This part of IEC 60974 does not specify requirements for welding cables.

IEC 60974-4:2010 specifies test procedures for periodic inspection and, after repair, to ensure electrical safety. These test procedures are also applicable for maintenance. This standard is applicable to power sources for arc welding and allied processes designed in accordance with IEC 60974-1 or IEC 60974-6. Stand-alone ancillary equipment designed in accordance with other part of IEC 60974 may be tested in accordance with relevant requirement of this part of IEC 60974. This second edition cancels and replaces the first edition published in 2006. It constitutes a technical revision. The main significant technical changes with respect to the previous edition are the following: - title is amended; - scope is extended to equipment designed in accordance with IEC 60974-6; - complementary instructions from the manufacturer shall be followed; - qualification of test personnel is clarified (see 4.1); - plasma cutting power sources are excluded from no-load voltage test (see 5.6); - voltage reducing device functional test is simplified (see 6.3); - supply voltage is recorded in test report (see 7.1).

IEC 60974-6:2010 specifies safety and performance requirements applicable to limited duty arc welding and cutting power sources, and auxiliaries designed for use by laymen. Electrically powered equipment is intended to be connected to the single phase public low-voltage supply system. Engine driven power sources can not exceed output power of 7,5 kVA. This second edition cancels and replaces the first edition published in 2003. It constitutes a technical revision. The main significant technical changes with respect to the previous edition are the following:
- extension of the scope;
- amendment of the title;
- touch current at fault condition (see 6.3.7);
- new definition of thermal requirements based two independent devices, one for thermal protection and one for thermal control (see 7.1);
- new definition for thermal performances at 20 °C (see 7.2);
- thermal safety requirements are based on operating temperature for normal condition and maximum temperature in overload condition (see 7.4);
- addition of abnormal operation test for thermal control device (see 10.4);
- new requirement for auxiliaries (see Clause 16);
- new rating plate definition (see Clause 17);
- introduction of new mandatory warning symbols (see 12.1.117.3, Box 17b) and 19.2);
- induced changes due to publication of IEC 60974-1:2005.
This publication is to be read in conjunction with IEC 60974-1:2005.

IEC 60974-11:2010 is applicable to electrode holders for manual metal arc welding with electrodes up to 10 mm in diameter. It is not applicable to electrode holders for underwater welding. This part of IEC 60974 specifies safety and performance requirements of electrode holders. This third edition cancels and replaces the second edition published in 2004. This edition constitutes a technical revision. The significant changes with respect to the previous edition are the following: - change of the environmental condition in accordance with IEC 60974-1 (see Clause 4); - change of electrical measuring instruments accuracy to Class 1 (see 5.1); - correction of sphere diameter to 12,5 mm (see 8.1); - alternative dielectric strength test (see 8.3). This publication is to be read in conjunction with IEC 60974-1:2005.

IEC 60974-9:2010(E) is applicable to the installation and use of equipment for arc welding and allied processes designed in accordance with safety requirements of IEC 60974-1, IEC 60974-6 or equivalent. This part of IEC 60974 is applicable for the guidance of instructors, operators, welders, managers, and supervisors in the safe installation and use of equipment for arc welding and allied processes and the safe performance of welding and cutting operations. It cancels and replaces IEC/TS 62081, published in 1999. This first edition constitutes a technical revision. The following major differences with respect to IEC/TS 62081:1999 are to be noted: - 4.3.3 Welding cables: Now dimensions are recommended; - 5 Electromagnetic compatibility (EMC): this is completely new; - 6 Electromagnetic fields (EMF): this is completely new; - 7.3 Inspection and maintenance of the welding installation: There is now a differentiation between periodical and routine inspection.

IEC 62135:2008 applies to equipment for resistance welding and allied processes and includes single and multiple welding stations which may be manually or automatically loaded and/or started. This standard covers stationary and portable equipment and specifies safety requirements for design, manufacture and installation.

This European Standard specifies validation methods for arc welding equipment constructed and used to the accuracy specified in EN 60974-1 or other equivalent standards. The accuracy of this equipment is designated as standard grade. This European Standard is applicable to a) arc welding power sources, b) wire feeders, c) welding instrumentation. This European Standard is not applicable to arc striking and stabilizing device. Calibration, verification and validation of equipment for other welding processes and ancillary equipment which may affect the quality of the weld, e.g. flow gauges, thermocouples, robots and manipulators are given in EN ISO 17662.

This European Standard applies to equipment for resistance welding and allied processes designed for use in industrial or domestic environments. NOTE 1 Typical allied processes are resistance hard and soft soldering or resistance heating achieved by means comparable to resistance welding equipment. This European Standard establishes a suitable evaluation method for determining the electromagnetic fields in the space around the equipment and defines standardized operating conditions and measuring distances. It provides a method to show conformity with guidelines or requirements concerning human exposure to electromagnetic fields. The Directive 2006/95/EC of the European Parliament and the Council [1], Article 2, stipulates that the Member States take all appropriate measures to ensure that electrical equipment may be placed on the market only if, having been constructed in accordance with good engineering practice in safety matters in force in the Community, it does not endanger the safety of persons, domestic animals or property when properly installed and maintained and used in applications for which is was made. The principal elements of those safety objectives are listed in Annex I Clause 2.b. This standard may be used in conjunction with EN 50445 for demonstration of conformity to the Council Directive with reference to human exposure to electromagnetic fields (EMF). There are additional requirements covered by Article 2 and Annex I Clause 2.b, which are not included in this document. The Council Recommendation 1999/519/EC [2] provides Basic Restrictions and Derived reference levels for exposure of the general public. This standard may be used for demonstration of resistance welding equipment conformity to the Council Recommendation on this basis, but there may be additional specific national or international requirements which are not included. The ICNIRP Guidelines [3], on limits of exposure to static magnetic fields as well as for limiting exposure in time varying electric, magnetic and electromagnetic fields, provide Basic restrictions and Derived reference levels for both occupational and general exposure. This standard may be used for demonstration of equipment conformity to ICNIRP Guidelines on this basis, but there may be additional national or international requirements which are not included. It is also possible to use this document as a basis to demonstrate conformity of resistance welding equipment to other national and international guidelines or requirements with regard to human exposure from EMF, for example Council Directive 2004/40/EC [4] on the minimum health and safety requirements regarding the exposure of workers to the risk arising from physical agents (electromagnetic fields), or the requirements of the Directive 98/37/EC [5]. In these cases, other restrictions and levels than those referenced above may be used. Other standards may apply to equipment covered by this standard. In particular this standard can not be used to demonstrate electromagnetic compatibility with other equipment; nor does it specify any product safety requirements other than those specifically related to human exposure to electromagnetic fields. The frequency range covered is 0 Hz to 300 GHz.

Specifies test methods to be used in conjunction with CISPR 11 to determine radiofrequency emission; relevant standards and test methods for harmonic current emission, voltage fluctuation and flicker. Also defines immunity requirements and test methods for continuous and transient, conducted and radiated disturbances including electrostatic discharges.

This product family standard applies to equipment for resistance welding, arc welding and allied processes designed for use in industrial or domestic environments, including welding power sources, wire feeders and ancillary equipment, e.g. torches, liquid cooling systems and arc striking and stabilising devices. NOTE 1 Allied processes are for example resistance hard and soft soldering, resistance heating by means comparable to resistance welding equipment, electric arc cutting and arc spraying. The frequency range covered is 0 Hz to 300 GHz. This product family standard may be used to demonstrate compliance with the requirements of Directive 2006/95/EC [1] (needed for placing electric welding equipment on the European market), with regard to the limitation of human exposure to electromagnetic fields (EMF). There are additional requirements in the Directive, which are not included in this product family standard. NOTE 2 The Directive 2006/95/EC [1], Article 2, stipulates that the Member States take all appropriate measures to ensure that electrical equipment may be placed on the market only if, having been constructed in accordance with good engineering practice in safety matters in force in the Community. This product family standard may also be used for assessment regarding the requirements of Directive 2004/40/EC [3] on the minimum health and safety requirements regarding the exposure of workers to the risks arising from physical agents (electromagnetic fields) or Recommendation 1999/519/EC [2] on the limitation of exposure of the general public to electromagnetic fields, provided that no other relevant field sources are present in close proximity. If other relevant field sources are present, additional assessment is necessary. NOTE 3 It should be noted that the supplier of specific equipment might not know the overall exposure environment in which the equipment is being used. This product family standard can only be used to assess human exposure from the specific equipment under evaluation when being used in accordance with the suppliers guidelines. NOTE 4 Assessment procedures for workplaces with multiple field-sources may be found in EN 50499 [7]. Other standards may apply to products covered by this product family standard. In particular this standard can not be used to demonstrate electromagnetic compatibility with other equipment; nor does it specify any product safety requirements other than those specifically related to human exposure to electromagnetic fields. NOTE 5 Procedures to demonstrate compliance are not specified for the whole frequency range.

This European Standard applies to equipment for arc welding and allied processes designed for use in industrial or domestic environments, including welding power sources, wire feeders and ancillary equipment, e.g. torches, liquid cooling systems and arc striking and stabilising devices. NOTE Allied processes are for example electric arc cutting and arc spraying. This standard specifies procedures for assessment of electromagnetic fields produced by arc welding equipment and defines standardized operating conditions and test set-ups. This standard may be used as a basis to demonstrate compliance to national and international guidelines or requirements with regard to human exposure to EMF from arc welding equipment [1] [2]. Other standards may apply to products covered by this standard. In particular this standard can not be used to demonstrate electromagnetic compatibility with other equipment; nor does it specify any product safety requirements other than those specifically related to human exposure to electromagnetic fields.

Specifies safety and performance requirements for industrial and professional equipment used in arc welding and allied processes to feed filler wire. The wire feeder may be a stand-alone unit which may be connected to a separate welding power source or one where the welding power source and the wire feeder are housed in a single enclosure. This new edition takes into account changes induced by the publication of the third edition of IEC 60974-1 as well as technical improvements and clarifications.

Specifies safety and construction requirements for industrial and professional liquid cooling systems used in arc welding and allied processes to cool torches. Is applicable to stand-alone liquid cooling systems that are either connected to a separate welding power source or built into the welding power source enclosure. This new edition takes into account changes induced by the publication of the third edition of IEC 60974-1 as well as technical changes in the set-up.

Specifies applicable standards and test methods for radio-frequency emissions; applicable standards and test methods for harmonic current emission, voltage fluctuations and flicker; immunity requirements and test methods for continuous and transient, conducted and radiated disturbances including electrostatic discharges. This new edition takes into account new editions of EMC publications.