EN 61094-5:2001

Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison

Applies to working standard microphones with removable protection grids meeting the requirements of EN 61094-4 and to laboratory standard microphones meeting the requirements of EN 61094-1. Describes methods of determining the pressure sensitivity by comparison with either a laboratory standard microphone that has been calibrated according to EN 61094-2, or another working standard microphone that has been calibrated according to this part of EN 61094.

Messmikrofone - Teil 5: Verfahren zur Druckkammer-Kalibrierung von Gebrauchs-Normalmikrofonen nach der Vergleichsmethode

Microphones de mesure - Partie 5: Méthodes pour l'étalonnage en pression par comparaison des microphones étalons de travail

S'applique aux microphones étalons de travail munis d'une grille de protection amovible satisfaisant aux prescriptions de la EN 61094-4 et aux microphones étalons de laboratoire satisfaisant aux prescriptions de la EN 61094-1. Décrit également des méthodes pour déterminer l'efficacité en pression par comparaison, soit à un microphone étalon de laboratoire qui a été étalonné selon la EN 61094-2, soit à un autre microphone étalon de travail qui a été étalonné selon la présente partie de la EN 61094.

Merilni mikrofoni - 5. del: Metode za primerjalno kalibriranje tlaka delujočega standardnega mikrofona (IEC 61094-5:2001)

General Information

• Status: Withdrawn
• Publication Date: 13-Dec-2001
• Withdrawal Date: 30-Nov-2004
• ICS: 17.140.50 - Electroacoustics
• Technical Committee: CLC/SR 29 - Electroacoustics
• Drafting Committee: IEC/TC 29 - IEC_TC_29
• Parallel Committee: IEC/TC 29 - IEC_TC_29
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 04-Jul-2019
• Completion Date: 04-Jul-2019
• Ref Project: SIST EN 61094-5:2007 - Measurement microphones -- Part 5: Methods for pressure calibration of working standard microphones by comparison

Relations

• Replaced By: EN 61094-5:2016 - Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison
• Effective Date: 06-Sep-2016

Standards Content (Sample)

6/29(16., 6,67(1

67$1'$5'
MDQXDU
0HULOQLPLNURIRQLGHO0HWRGH]DSULPHUMDOQRNDOLEULUDQMHWODNDGHOXMRþHJD
VWDQGDUGQHJDPLNURIRQD,(&
LVWRYHWHQ(1
0HDVXUHPHQWPLFURSKRQHV3DUW0HWKRGVIRUSUHVVXUHFDOLEUDWLRQRIZRUNLQJ
VWDQGDUGPLFURSKRQHVE\FRPSDULVRQ,(&
,&6 5HIHUHQþQDãWHYLOND

6,67(1HQ
!"#$%&’( )&!*+,%- .

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 61094-5
NORME EUROPÉENNE
EUROPÄISCHE NORM December 2001
ICS 17.140.50
English version
Measurement microphones
Part 5: Methods for pressure calibration of
working standard microphones by comparison
(IEC 61094-5:2001)
Microphones de mesure Messmikrofone
Partie 5: Méthodes pour l'étalonnage Teil 5: Verfahren zur Druckkammer-
en pression par comparaison des Kalibrierung von Gebrauchs-
microphones étalons de travail Normalmikrofonen nach der
(CEI 61094-5:2001) Vergleichsmethode
(IEC 61094-5:2001)
This European Standard was approved by CENELEC on 2001-12-04. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61094-5:2001 E

---------------------- Page: 2 ----------------------

EN 61094-5:2001 - 2 -
Foreword
The text of document 29/495/FDIS, future edition 1 of IEC 61094-5, prepared by IEC TC 29,
Electroacoustics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC
as EN 61094-5 on 2001-12-04.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2002-09-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2004-12-01
Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, annex ZA is normative and annexes A, B, C and D are informative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61094-5:2001 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61094-5:2001
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1) 2)
IEC 61094-1 Measurement microphones EN 61094-1 2000
Part 1: Specifications for laboratory
standard microphones
IEC 61094-2 1992 Part 2: Primary method for pressure EN 61094-2 1993
calibration of laboratory standard
microphones by the reciprocity
technique
1) 2)
IEC 61094-4 Part 4: Specifications for working EN 61094-4 1995
standard microphones
ISO/IEC GUIDE 1995 Guide to the expression of uncertainty--
EXPRES in measurement (GUM)

1)
undated reference.
2)
valid edition at date of issue.

---------------------- Page: 4 ----------------------

NORME CEI
INTERNATIONALE IEC
61094-5
INTERNATIONAL
Première édition
STANDARD
First edition
2001-10
Microphones de mesure –
Partie 5:
Méthodes pour
...