EN 61131-2:2003
(Main)Programmable controllers - Part 2: Equipment requirements and tests
Programmable controllers - Part 2: Equipment requirements and tests
Specifies electrical, mechanical and functional requirements as well as the test methods and procedures to be used for the verification of compliance with these.
Speicherprogrammierbare Steuerungen - Teil 2: Betriebsmittelanforderungen und Prüfungen
Automates programmables - Partie 2: Spécifications et essais des équipements
Spécifie les prescriptions électriques mécaniques et fonctionnelles ainsi que les méthodes de test et les procédures à suivre pour vérifier la conformité avec ces prescriptions.
Programmable controllers - Part 2: Equipment requirements and tests
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 61131-2:2004
STANDARD
marec 2004
Programmable controllers - Part 2: Equipment requirements and tests
ICS 5HIHUHQþQDãWHYLOND
25.040.40; 35.240.50
! "#$%!&!%’()*#+’
EUROPEAN STANDARD EN 61131-2
NORME EUROPÉENNE
EUROPÄISCHE NORM August 2003
ICS 35.240.50; 25.040.40 Supersedes EN 61131-2:1994 + A11:1996 + A12:2000
Incorporates Corrigendum August 2003
English version
Programmable controllers
Part 2: Equipment requirements and tests
(IEC 61131-2:2003)
Automates programmables Speicherprogrammierbare Steuerungen
Partie 2: Spécifications et essais des Teil 2: Betriebsmittelanforderungen und
équipements Prüfungen
(CEI 61131-2:2003) (IEC 61131-2:2003)
This European Standard was approved by CENELEC on 2003-05-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61131-2:2003 E
Foreword
The text of document 65B/470A/FDIS, future edition 2 of IEC 61131-2, prepared by SC 65B, Devices,
of IEC TC 65, Industrial-process measurement and control, was submitted to the IEC-CENELEC
parallel vote and was approved by CENELEC as EN 61131-2 on 2003-05-01.
This European Standard supersedes EN 61131-2:1994 + A11:1996 + A12:2000.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-02-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-05-01
Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, annexes C and ZA are normative and annexes A, B, D and E informative.
Annex ZA has been added by CENELEC.
The contents of the corrigendum of August 2003 have been included in this copy.
__________
Endorsement notice
The text of the International Standard IEC 61131-2:2003 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 60038 NOTE Harmonized as HD 472 S1:1989 (modified)
IEC 60112 NOTE IEC 60112:2003 is harmonized as EN 60112:2003 (not modified)
IEC 60445 NOTE Harmonized as EN 60445:2000 (not modified)
IEC 60947-5-2 NOTE Harmonized as EN 60947-5-2:1998 (modified)
IEC 61140 NOTE Harmonized as EN 61140:2002 (not modified)
IEC 62079 NOTE Harmonized as EN 62079:2001 (not modified)
Corrigendum to IEC 61131-2:2003:
In Table 41, replace “Table 64” by “Table D.2”.
In Table 56, replace “Figure 13” by “Figure 12”.
__________
- 3 - EN 61131-2:2003
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.