EN IEC 63203-201-2:2022
(Main)Wearable electronic devices and technologies - Part 201-2: Electronic textile - Measurement methods for basic properties of conductive fabrics and insulation materials
Wearable electronic devices and technologies - Part 201-2: Electronic textile - Measurement methods for basic properties of conductive fabrics and insulation materials
IEC 63203-201-2:2022 specifies the provisions for conductive fabrics and insulation materials used for electronic textiles and measurement methods for their properties. Conductive fabrics covered by this document are basic materials in electronic textiles and are mainly used as conductive traces, electrodes and the like in clothes-type wearable devices. This document does not cover high-resistance conductive fabrics used for antistatic purposes and heater applications. Insulating materials handled in this document are materials used for electrical insulation of conductive parts in electronic textiles. They include materials for covering the conductive parts, and general fabrics constituting the basic structure of clothes‑type wearable devices. This document does not define the required characteristics of the conductive fabric and insulation materials; rather, it specifies measurement methods for general and electrical properties of the conductive fabric and insulation materials.
Tragbare elektronische Geräte und Technologien - Teil 201-2: Elektronische Textilien - Messverfahren für die grundlegenden Eigenschaften von leitfähigen Textilien und Isolationswerkstoffen
Technologies et dispositifs électroniques prêts-à-porter - Partie 201-2: Textile électronique - Méthodes de mesure des propriétés fondamentales des étoffes conductrices et des matériaux isolants
L’IEC 63203-201-2:2022 spécifie les dispositions applicables aux étoffes conductrices et aux matériaux isolants utilisés pour les textiles électroniques, ainsi que les méthodes de mesure de leurs propriétés. Les étoffes conductrices traitées dans le présent document constituent les matériaux de base des textiles électroniques et sont utilisées principalement comme traces conductrices, électrodes conductrices et analogues dans les dispositifs prêts-à-porter de type vêtements. Le présent document n’inclut pas les étoffes conductrices à haute résistance utilisées à des fins antistatiques et pour les applications de chauffage. Les matériaux isolants visés dans le présent document sont des matériaux utilisés pour l’isolation électrique des parties conductrices dans les textiles électroniques. Ils incluent les matériaux de revêtement des parties conductrices, et les étoffes générales qui constituent la structure de base des dispositifs prêts-à-porter de type vêtements. Le présent document ne définit pas les caractéristiques exigées de l’étoffe conductrice ni des matériaux isolants, mais spécifie les méthodes de mesurage liées aux propriétés générales et électriques de l’étoffe conductrice et des matériaux isolants.
Nosljive elektronske naprave in tehnologije - 201-2. del: Elektronski tekstil - Metode merjenja osnovnih lastnosti prevodnih tkanin in izolacijskih materialov (IEC 63203-201-2:2022)
Ta del standarda IEC 63203-201 podaja določbe za prevodne tkanine in izolacijske materiale, ki se uporabljajo za elektronski tekstil, ter metode za merjenje njihovih lastnosti. Prevodne tkanine, ki jih obravnava ta dokument, so osnovni material za elektronski tekstil ter se uporabljajo predvsem kot prevodne sledi, elektrode in podobno pri nosljivih napravah za oblačenje. Ta dokument ne zajema prevodnih tkanin z visoko odpornostjo, ki se uporabljajo pri preprečevanju statične naelektritve in grelnikih. Izolacijski materiali, obravnavani v tem dokumentu, so materiali, ki se uporabljajo za električno izolacijo prevodnih delov v elektronskem tekstilu. Zajemajo materiale za prekrivanje prevodnih delov in splošne tkanine, ki tvorijo osnovno strukturo nosljivih naprav za oblačenje. Ta dokument ne opredeljuje zahtevanih lastnosti prevodnih tkanin in izolacijskih materialov, temveč določa metode za merjenje splošnih ter električnih lastnosti prevodnih tkanin in izolacijskih materialov.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2022
Nosljive elektronske naprave in tehnologije - 201-2. del: Elektronski tekstil -
Metode merjenja osnovnih lastnosti prevodnih tkanin in izolacijskih materialov
(IEC 63203-201-2:2022)
Wearable electronic devices and technologies - Part 201-2: Electronic textile -
Measurement methods for basic properties of conductive fabrics and insulation materials
(IEC 63203-201-2:2022)
Tragbare elektronische Geräte und Technologien - Teil 201-2: Elektronische Textilien -
Messverfahren für die grundlegenden Eigenschaften von leitfähigen Textilien und
Isolationswerkstoffen (IEC 63203-201-2:2022)
Technologies et dispositifs électroniques prêts-à-porter - Partie 201-2: Textile
électronique - Méthodes de mesure des propriétés fondamentales des étoffes
conductrices et des matériaux isolants (IEC 63203-201-2:2022)
Ta slovenski standard je istoveten z: EN IEC 63203-201-2:2022
ICS:
59.080.80 Inteligentne tekstilije Smart textiles
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 63203-201-2
NORME EUROPÉENNE
EUROPÄISCHE NORM June 2022
ICS 59.080.80; 59.080.30
English Version
Wearable electronic devices and technologies - Part 201-2:
Electronic textile - Measurement methods for basic properties of
conductive fabrics and insulation materials
(IEC 63203-201-2:2022)
Technologies et dispositifs électroniques prêts-à-porter - Tragbare elektronische Geräte und Technologien - Teil 201-
Partie 201-2: Textile électronique - Méthodes de mesure 2: Elektronische Textilien - Messverfahren für die
des propriétés fondamentales des étoffes conductrices et grundlegenden Eigenschaften von leitfähigen Textilien und
des matériaux isolants Isolationswerkstoffen
(IEC 63203-201-2:2022) (IEC 63203-201-2:2022)
This European Standard was approved by CENELEC on 2022-05-31. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 63203-201-2:2022 E
European foreword
The text of document 124/176/FDIS, future edition 1 of IEC 63203-201-2, prepared by IEC/TC 124
"Wearable electronic devices and technologies" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 63203-201-2:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2023-02-28
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025-05-31
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 63203-201-2:2022 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61557-2:2019 NOTE Harmonized as EN IEC 61557-2:2021 (not modified)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60243-1 2013 Electric strength of insulating materials - EN 60243-1 2013
Test methods - Part 1: Tests at power
frequencies
IEC 60468 1974 Method of measurement of resistivity of - -
metallic materials
IEC 62631-3-1 2016 Dielectric and resistive properties of solid EN 62631-3-1 2016
insulating materials - Part 3-1:
Determination of resistive properties (DC
methods) - Volume resistance and volume
resistivity - General method
ISO 105-E04 - Textiles – Tests for colour fastness – Part EN ISO 105-E04 -
E04: Colour fastness to perspiration
ISO 139 - Textiles – Standard atmospheres for EN ISO 139 -
conditioning and testing
ISO 6330 - Textiles – Domestic washing and drying EN ISO 6330 -
procedures for textile testing
- - Textiles and textile products – Electrically EN 16812 2016
conductive textiles – Determination of the
linear electrical resistance of conductive
tracks
IEC 63203-201-2 ®
Edition 1.0 2022-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Wearable electronic devices and technologies –
Part 201-2: Electronic textile – Measurement methods for basic properties of
conductive fabrics and insulation materials
Technologies et dispositifs électroniques prêts-à-porter –
Partie 201-2: Textile électronique – Méthodes de mesure des propriétés
fondamentales des étoffes conductrices et des matériaux isolants
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 59.080.30; 59.080.80 ISBN 978-2-8322-1104-0
– 2 – IEC 63203-201-2:2022 © IEC 2022
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Materials and structure . 7
4.1 Classification of conductive fabric . 7
4.2 Classification of insulation materials . 8
5 Atmospheric conditions for measurement and conditioning . 8
6 Characteristics and measurement methods for conductive fabric . 8
6.1 Electrical properties . 8
6.1.1 Sheet resistance . 8
6.1.2 Fusing current . 9
6.1.3 Electric insulation properties . 10
6.2 Chemical and biological resistance . 14
6.2.1 Perspiration resistance . 14
6.2.2 Detergent resistance . 15
Bibliography . 16
Figure 1 – Classification of electric insulation materials . 8
Figure 2 – Test specimen for measurement of insulation properties . 11
Figure 3 – Test specimen setting . 11
Figure 4 – Measurement circuit of cover insulation layer side. 11
Figure 5 – Measurement circuit of substrate side . 13
Table 1 – Pre-tensioning for fabrics without stretch characteristics . 9
IEC 63203-201-2:2022 © IEC 2022 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
WEARABLE ELECTRONIC DEVICES AND TECHNOLOGIES –
Part 201-2: Electronic textile –
Measurement methods for basic properties of
conductive fabrics and insulation materials
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC 63203-201-2 has been prepared by IEC technical committee 124: Wearable electronic
devices and technologies. It is an International Standard.
The text of this International Standard is based on the following documents:
Draft Report on voting
124/176/FDIS 124/181/RVD
Full information on the voting for its
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.