EN 61196-2:2003

Radio-frequency cables - Part 2: Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation

Prescribes recommended ratings and characteristics. Selects from the generic specification the appropriate quality assessment procedures, test and measuring methods. Gives general performance requirements for semi-rigid coaxial cables plus complementry test methods.

Hochfrequenzkabel - Teil 2: Rahmenspezifikation für halb-starre Hochfrequenz- und Koaxialkabel mit Polytetrafluorethylen (PTFE) Isolation

Câbles pour fréquences radioélectriques - Partie 2: Spécification intermédiaire pour câbles coaxiaux et semi-rigides pour fréquences radioélectriques à isolation polytétrafluoroéthylène

Définit les exigences relatives aux câbles semi-rigides coaxiaux pour fréquences radioélectriques, avec isolation polytétrafluoroéthylène (PTFE). Prescrit les performances et les caractéristiques recommandées. Sélectionne, dans la spécification générique, les procédures d'assurance de qualité, les méthodes d'essai et de mesure appropriées, et donne les exigences générales de perfomance pour les câbles coaxiaux semi-rigides, ainsi que des méthodes d'essais complémentaires.

Radio-frequency cables - Part 2: Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation (IEC 61196-2:1995)

General Information

• Status: Withdrawn
• Publication Date: 15-Oct-2003
• Withdrawal Date: 30-Sep-2006
• ICS: 33.120.10 - Coaxial cables. Waveguides
• Technical Committee: CLC/TC 46X - Communication cables
• Drafting Committee: CLC/SC 46XA - Coaxial cables
• Parallel Committee: IEC/SC 46A - IEC_SC_46A
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 22-Jan-2019
• Completion Date: 22-Jan-2019
• Mandate: M/212 - ICT - metallic and optical cables and cabling systems
• Ref Project: SIST EN 61196-2:2004 - Radio-frequency cables -- Part 2: Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation

Relations

• Replaces: EN 61196-2:1995 - Radio-frequency cables - Specifications - Part 2: Semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation - Sectional specification
• Effective Date: 29-Jan-2023
• Replaced By: EN 61196-10:2016 - Coaxial communication cables - Part 10: Sectional specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric
• Effective Date: 27-Jan-2023

Standards Content (Sample)

SLOVENSKI SIST EN 61196-2:2004

STANDARD
april 2004
Radio-frequency cables - Part 2: Sectional specification for semi-rigid radio-
frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation (IEC
61196-2:1995)
ICS 33.120.10 Referenčna številka
SIST EN 61196-2:2004(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 61196-2
NORME EUROPÉENNE
EUROPÄISCHE NORM October 2003

ICS 33.120.10


English version


Radio-frequency cables
Part 2: Sectional specification for semi-rigid radio-frequency
and coaxial cables with polytetrafluoroethylene (PTFE) insulation
(IEC 61196-2:1995)


Câbles pour fréquences radioélectriques Hochfrequenzkabel
Partie 2: Spécification intermédiaire Teil 2: Rahmenspezifikation für halb-starre
pour câbles coaxiaux et semi-rigides Hochfrequenz- und Koaxialkabel mit
pour fréquences radioélectriques Polytetrafluorethylen (PTFE) Isolation
à isolation polytétrafluoroéthylène (IEC 61196-2:1995)
(CEI 61196-2:1995)






This European Standard was approved by CENELEC on 2003-10-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 61196-2:2003 E

---------------------- Page: 2 ----------------------

EN 61196-2:2003 – 2 –
Foreword

The text of the International Standard IEC 61196-2:1995, prepared by SC 46A, Coaxial cables, of
IEC TC 46, Cables, wires, waveguides, r.f. connectors, r.f. and microwave passive components and
accessories, was submitted to the formal vote and was approved by CENELEC as EN 61196-2 on
2003-10-01.

This European Standard supersedes EN 61196-2:1995.

The following dates were fixed:

- latest date by which the EN has to be implemented
 at national level by publication of an identical
 national standard or by endorsement (dop) 2004-10-01

- latest date by which the national standards conflicting
 with the EN have to be withdrawn (dow) 2006-10-01

Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, annex ZA is normative and annex A is informative.
Annex ZA has been added by CENELEC.

__________

Endorsement notice

The text of the International Standard IEC 61196-2:1995 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

– 3 – EN 61196-2:2003
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other publications.
These normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications
apply to this European Standard only when incorporated in it by amendment or revision. For undated
references, the latest edition of the publication referred to applies (including amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60028 1925 International standard of resistance for - -
copper
1)
IEC 60068-2-20 1979 Basic environmental testing procedures HD 323.2.20 S3 1988
Part 2: Tests - Test T: Soldering
IEC 61196-1 1995 Radio-frequency cables - -
Part 1: Generic specification - General,
definitions, requirements and test
methods


...