iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

HD 477.3.6 S1:1988

(Main)

Methods of measurement of equipment used in terrestrial radio-relay systems - Part 3: Simulated systems - Section 6: Measurements for sound-programme transmission

Methods of measurement of equipment used in terrestrial radio-relay systems - Part 3: Simulated systems - Section 6: Measurements for sound-programme transmission

Deals with methods of measurement for sound-programme analogue channels carried by radio-relay systems. Concerned only with the audio-frequency band and is additional to the measurement described in sections three, four and five of this publication. Sound channels can be derived using analogue or time division multiplex techniques.

Meßverfahren für Geräte in terrestrischen Richtfunksystemen - Teil 3: Simulierte Systeme - Hauptabschnitt 6: Messungen für Audio-Programmübertragungen

Méthodes de mesure applicables au matériel utilisé dans les faisceaux hertziens terrestres - Partie 3: Liaisons simulées - Section 6: Mesures concernant la transmission de la modulation sonore

Traite des méthodes de mesure applicables aux voies de modulation sonore de haute qualité transmise par faisceaux hertziens. Ne concerne que la bande des fréquences acoustiques et supplémente les mesures décrites dans la troisième, quatrième et cinquième section de cette publication. Les voies de modulation sonore peuvent être obtenues au moyen de techniques analogiques ou par l'emploi d'un multiplexage à répartition dans le temps.

Methods of measurement of equipment used in terrestrial radio-relay systems - Part 3: Simulated systems - Section 6: Measurements for sound-programme transmission

General Information

Status
Withdrawn
Publication Date
10-Oct-1988
Withdrawal Date
30-Sep-1989
ICS
33.060.30 - Radio relay and fixed satellite communications systems
Technical Committee
CLC/SR 102 - Equipment used in radio communications for mobile services and satellite communication systems
Drafting Committee
IEC/TC 102 - IEC_TC_102
Parallel Committee
IEC/TC 102 - IEC_TC_102
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
14-Dec-2022
Ref Project
SIST HD 477.3.6 S1:2002 - Methods of measurement of equipment used in terrestrial radio-relay systems -- Part 3: Simulated systems -- Section 6: Measurements for sound-programme transmission

Buy Standard

HD 477.3.6 S1:2002HD 477.3.6 S1:2002
PreviousNext
Standardization document
HD 477.3.6 S1:2002
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI SIST HD 477.3.6 S1:2002
prva izdaja
STANDARD
oktober 2002
Methods of measurement of equipment used in terrestrial radio-relay systems - Part
3: Simulated systems - Section 6: Measurements for sound-programme
transmission
ICS 33.060.30 Re
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
CWA 45546-1:2004(Main)
Guidelines to standardisers of Collective Transport Systems - Needs of older people and persons with disabilities - Part 1: Basic Guidelines
SIST EN 60728-1-1:2014

IEC 60728-1-1:2014 is applicable to RF cabling for two-way home networks with wired cords or wireless links inside a room and primarily intended for television and sound signals operating between about 5 MHz and 3 000 MHz. The frequency range is extended to 6 000 MHz for distribution techniques that replace wired cords with a wireless two-way communication. This second edition cancels and replaces the first edition published in 2010, and constitutes a technical revision. It includes the following changes: update of performance requirements in Clause 5 to include those for DVB-T2 signals.

  • Standard
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50494:2007(Main)
Satellite signal distribution over a single coaxial cable in single dwelling installations
SIST EN 50494:2008

This European Standard describes: – the system physical structure; – the system control signals, which implement an extension of the DiSEqC set of commands described in the DiSEqC bus functional specification; – the definition of identified configurations; – management of the potential collisions in the control signals traffic.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50478:2007(Main)
Functional receiver specification of satellite digital interactive television with a low data rate return channel via satellite - Modem layer specification
SIST EN 50478:2007

This standard applies for the interaction channel for interactive television networks using Geostationary Satellites with fixed return channel satellite terminals via low data rate dedicated return link. It specifies the essential elements for the implementation of the interaction channel.

  • Standard
    114 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61319-1:1996/A11:1999(Amendment)
Interconnections of satellite receiving equipment - Part 1: Europe
SIST EN 61319-1:1999/A11:2003

Initially handled by TC 206 (disbanded) * D141/C101: Transferred to new TC 100X
2021: CLC legacy converted by DCLab NISOSTS

  • Amendment
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61319-1:1996(Main)
Interconnections of satellite receiving equipment - Part 1: Europe
SIST EN 61319-1:1999

Deals with the standardization of interconnections and matching values for satellite receivers for individual television and sound radio broadcast reception in the 10,70 GHz to 12,75 GHz band.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60704-2-10:2024(Main)
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-10: Particular requirements for ranges, ovens, steam ovens, grills and microwave ovens
SIST EN IEC 60704-2-10:2024

IEC 60704-2-10:2024 applies to ranges, ovens, steam ovens, grills and microwave ovens for household and similar use. This document does not apply to hobs. This document does not apply to appliances or parts of appliances that use gas energy. Requirements for the declaration of noise emission values are not within the scope of this document. This third edition cancels and replaces the second edition published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) alignment with the fourth edition of IEC 60704-1:2021; b) alignment with IEC 60350-1:2023 regarding the definitions and settings; c) introduction of the measurement of the steam function; d) revision of settings and test parameters. This document is intended to be used in conjunction with IEC 60704-1:2021, Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 1: General requirements.

  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62271-211:2024(Main)
High-voltage switchgear and controlgear - Part 211: Direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages above 52 kV
SIST EN IEC 62271-211:2024

IEC 62271-211:2024 is applicable to single- and three-phase direct connections between gas-insulated metal-enclosed switchgear (GIS) for rated voltages above 52 kV and transformer arrangements to establish electrical and mechanical interchange ability and to determine the limits of supply for the transformer connection. This second edition cancels and replaces the first edition of IEC 62271-211:2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) re-numbering of clauses according to IEC 62271-1:2017, b) Clause 3: updating definition about bushing (3.1), updating some pressure definitions (3.6, 3.7, 3.8, 3.9), rewording definition about proctor density (3.11), new term very-fast-front overvoltage (3.12), c) Clause 5 (former clause 4): add a subclause 5.1 General, according to IEC 62271-1:2017 and IEC 62271-203:2022, 1) subclause 5.5: new first paragraph, rewording second paragraph, 2) subclause 5.8: modify the term "Rated duration of thermal short-time current" of the bushing, d) Clause 6 (former Clause 5): restructure and rewording of subclauses: 1) 6.1 (former 5.3): requirements about gas and vacuum tightness of the transformer bushing 2) 6.3 (former 5.2): harmonization with IEC 62271-203:2022 about typical maximum pressure in service for SF6, other gases and gas mixtures, 3) 6.4 (former 5.8), rewording 4) 6.5 (former 5.1), some rewording and modification 5) 6.6 (former 5.4), some rewording, updated references 6) 6.7 (former 5.5), some rewording 7) 6.8 (former 5.6), some rewording 8) 6.9 (former 5.7), slight rewording, e) Clause 7 (former clause 6) type tests: some rewording and clarifications about references, f) Clause 8 (former clause 7) routine tests: 1) 8.2 (former 7.2): add a paragraph about SF6-mixtures and other gases than SF6, 2) 8.3 (former 7.3): update reference to relevant on-site test according to IEC 62271‑203:2022, g) Clause 9 Guide to the selection of switchgear and controlgear (new): informative, to have a reference to IEC 62271-203:2022, h) Clause 11 (former 10): updated headline and updated reference according to IEC 62271‑1:2017, i) new Clauses 12 Safety and 13 Environmental aspects: Adding of references to safety and environmental aspects, j) correction of errors in Corrigendum 2 of IEC 62271-211:2017, k) modified orientation of Figure 1 to Figure 4 for easier reading of the tables.

  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50156-1:2024(Main)
Electrical equipment for furnaces and ancillary equipment - Part 1: Requirements for application design and installation
kSIST FprEN 50156-1:2024

This document applies to the application design and installation of electrical equipment, control circuits and safety-related systems for furnaces which are operated with solid, liquid or gaseous fuels and their ancillary equipment. It specifies requirements to meet the operating conditions of furnaces, to reduce the hazards of combustion and to protect the heated systems from damage e.g. by overheating. Such furnaces and the electrical equipment can be part by way of example of the following plant: a) water heating systems; b) steam boiler installations (steam and hot-water boilers) and heat recovery steam boilers; NOTE 1 The requirements of this document apply according to the electrical equipment of electrically heated steam boilers. NOTE 2 Seagoing vessels and offshore facilities are governed by International Maritime Law and as such are not within the scope of this document. These requirements can be used for such facilities. c) warm air heaters; d) hot-gas heaters; e) heat exchanger systems; f) combustion chambers of stationary turbines; g) as long as no other standard is applicable for combined heat and power stations, we recommend the use of the requirements of this document; This document can also be used as reference for electrical equipment requirements for thermo-processing equipment. The requirements in this document are not applicable to electrical equipment for: 1) non-electrically heated appliances and burner control systems for household and similar purposes; 2) furnaces using technologies for the direct conversion of heat into electrical energy; 3) combustion chambers of non-stationary prime movers and turbines; 4) central oil supply systems for individual heating appliances; 5) furnaces using solid fuels for heating purposes for household use with a nominal thermal output up to 1 MW; 6) furnaces which are used to heat process fluids and gasses in chemical plant. This document can be used as a basis for the requirements placed on electrical equipment for furnaces, which are excluded from its field of application. This document specifies special requirements for the management of functional safety.

  • Draft
    101 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60308:2024(Main)
Hydraulic turbines - Testing of governing systems
SIST EN IEC 60308:2024

IEC 60308:2024 deals with the definition and the characteristics of control systems. It is not limited to the actual controller tasks but also includes other tasks which may be assigned to a control system, such as sequence control tasks, safety and provision for the actuating energy. The following systems are included, speed, power, opening, water level and flow control for all turbine types; electronic, electrical and fluid power devices; safety devices as well as start-up and shutdown devices. The significant technical changes introduced by the third edition are the adoption of parts of IEC 61362:2024 which deal with test matters and the introduction of new technical aspects.

  • Draft
    89 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60721-3-1:2018/AC:2024-10(Corrigendum)
Classification of environmental conditions - Part 3-1: Classification of groups of environmental parameters and their severities - Storage
SIST EN IEC 60721-3-1:2018/AC:2024
  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day