EN 61158-5-18:2008

Industrial communication networks - Fieldbus specifications - Part 5-18: Application layer service definition - Type 18 elements

It provides user programs with a means to access the fieldbus communication environment. In this respect, the FAL can be viewed as a 'window between corresponding application programs.' This standard provides common elements for basic time-critical and non-time-critical messaging communications between application programs in an automation environment and material specific to Type 18 fieldbus. The term 'time-critical' is used to represent the presence of a time-window, within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions, with attendant risk to equipment, plant and possibly human life. It includes the following significant changes with respect to the previous edition deletion of the former Type 6 fieldbus, and the placeholder for a Type 5 fieldbus data-link layer, for lack of market relevance; addition of new types of fieldbuses; division of this part into multiple parts numbered.

Industrielle Kommunikationsnetze - Feldbusse - Teil 5-18: Dienstfestlegungen des Application Layer (Anwendungsschicht) - Typ 18-Elemente

Réseaux de communication industriels - Spécifications des bus de terrain - Partie 5-18: Définition des services des couches d'application - Eléments de type 18

Industrijska komunikacijska omrežja - Specifikacije za procesno vodilo - 5-18. del: Definicija opravil na aplikacijskem nivoju - Elementi tipa 18 (IEC 61158-5-18:2007)

General Information

• Status: Withdrawn
• Publication Date: 13-Mar-2008
• Withdrawal Date: 31-Jan-2011
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.100.70 - Application layer
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65C - IEC_SC_65C
• Parallel Committee: IEC/SC 65C - IEC_SC_65C
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 28-Mar-2015
• Completion Date: 28-Mar-2015
• Mandate: M/490 - Standardisation mandate to the European Standardisation Organisations (ESOs) to support European Smart Grid deployment
• Ref Project: SIST EN 61158-5-18:2008 - Industrial communication networks - Fieldbus specifications - Part 5-18: Application layer service definition - Type 18 elements

Relations

• Replaces: EN 61158-5:2004 - Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 5: Application layer service definition
• Effective Date: 29-Jan-2023
• Replaced By: EN 61158-5-18:2012 - Industrial communication networks - Fieldbus specifications - Part 5-18: Application layer service definition - Type 18 elements
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2008
1DGRPHãþD
SIST EN 61158-5:2004
Industrijska komunikacijska omrežja - Specifikacije za procesno vodilo - 5-18. del:
Definicija opravil na aplikacijskem nivoju - Elementi tipa 18 (IEC 61158-5-18:2007)
Industrial communication networks - Fieldbus specifications - Part 5-18: Application layer
service definition - Type 18 elements
Industrielle Kommunikationsnetze - Feldbusse - Teil 5-18: Dienstfestlegungen des
Application Layer (Anwendungsschicht) - Typ 18-Elemente
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 5-18:
Définition des services des couches d'application - Eléments de type 18
Ta slovenski standard je istoveten z: EN 61158-5-18:2008
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.70 Uporabniški sloj Application layer
35.110 Omreževanje Networking
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61158-5-18
NORME EUROPÉENNE
March 2008
EUROPÄISCHE NORM
ICS 35.100.70; 25.040.40 Partially supersedes EN 61158-5:2004

English version
Industrial communication networks -
Fieldbus specifications -
Part 5-18: Application layer service definition -
Type 18 elements
(IEC 61158-5-18:2007)
Réseaux de communication industriels -  Industrielle Kommunikationsnetze -
Spécifications des bus de terrain - Feldbusse -
Partie 5-18: Définition des services Teil 5-18: Dienstfestlegungen
des couches d'application - des Application Layer
Eléments de type 18 (Anwendungsschicht) -
(CEI 61158-5-18:2007) Typ 18-Elemente
(IEC 61158-5-18:2007)
This European Standard was approved by CENELEC on 2008-02-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61158-5-18:2008 E
Foreword
The text of document 65C/475/FDIS, future edition 1 of IEC 61158-5-18, prepared by SC 65C, Industrial
networks, of IEC TC 65, Industrial-process measurement, control and automation, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61158-5-18 on 2008-02-01.
This and the other parts of the EN 61158-5 series supersede EN 61158-5:2004.
With respect to EN 61158-5:2004 the following changes were made:
– deletion of Type 6 fieldbus for lack of market relevance;
– addition of new fieldbus types;
– partition into multiple parts numbered 5-2, 5-3, …, 5-20.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2008-11-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2011-02-01
with the EN have to be withdrawn
NOTE  Use of some of the associated protocol types is restricted by their intellectual-property-right holders. In all cases, the
commitment to limited release of intellectual-property-rights made by the holders of those rights permits a particular data-link layer
protocol type to be used with physical layer and application layer protocols in type combinations as specified explicitly in the
EN 61784 series. Use of the various protocol types in other combinations may require permission from their respective
intellectual-property-right holders.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61158-5-18:2007 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61131-1 NOTE  Harmonized as EN 61131-1:2003 (not modified).
IEC 61131-3 NOTE  Harmonized as EN 61131-3:2003 (not modified).
IEC 61158-3-18 NOTE  Harmonized as EN 61158-3-18:2008 (not modified).
IEC 61158-4-18 NOTE  Harmonized as EN 61158-4-18:2008 (not modified).
IEC 61158-6-18 NOTE  Harmonized as EN 61158-6-18:2008 (not modified).
IEC 61784-1 NOTE  Harmonized as EN 61784-1:2008 (not modified).
IEC 61784-2 NOTE  Harmonized as EN 61784-2:2008 (not modified).
ISO 8601 NOTE  Harmonized as EN 28601:1992 (not modified).
ISO/IEC 8877 NOTE  Harmonized as EN 28877:1993 (not modified).
__________
- 3 - EN 61158-5-18:2008
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

1) 2)
IEC 60559 - Binary floating-point arithmetic for HD 592 S1 1991
microprocessor systems
IEC/TR 61158-1 2007 Industrial communication networks - - -
Fieldbus specifications -
Part 1: Overview and guidance for the
IEC 61158 and IEC 61784 series

1) 2)
ISO/IEC 7498-1 - Information technology - Open Systems EN ISO/IEC 7498-1 1995
Interconnection - Basic Reference Model:
The Basic Model
1)
ISO/IEC 8822 - Information technology - Open Systems - -
Interconnection - Presentation service
definition
1)
ISO/IEC 8824 - Information technology - Open Systems - -
Interconnection - Specification of Abstract
Syntax Notation One (ASN.1)
1)
ISO/IEC 9545 - Information technology - Open Systems - -
Interconnection - Application Layer structure

1)
Undated reference.
2)
Valid edition at date of issue.

IEC 61158-5-18
Edition 1.0 2007-12
INTERNATIONAL
STANDARD
Industrial communication networks – Fieldbus specifications –
Part 5-18: Application layer service definition – Type 18 elements

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
W
ICS 35.100.70; 25.040.40 ISBN 2-8318-9471-9

– 2 – 61158-5-18 © IEC:2007(E)
CONTENTS
FOREWORD.3
INTRODUCTION.4
1 Scope.6
1.1 Overview .6
1.2 Specifications .7
1.3 Conformance.7
2 Normative references .7
3 Terms, definitions, abbreviations, and conventions .8
3.1 Referenced terms and definitions .8
3.2 Additional terms and definitions for distributed automation .8
3.3 Abbreviations and symbols .9
3.4 Conventions .9
4 Concepts .9
4.1 Common concepts.9
4.2 Type specific concepts .9
5 Data type ASE.11
5.1 General .11
5.2 Formal definition of data type objects .11
5.3 FAL defined data types.11
5.4 Data type ASE service specification .14
6 Communication model specification .14
6.1 General .14
6.2 ASEs .14
6.3 ARs .23
Bibliography.38

Table 1 – AR types .9
Table 2 – Process data support level .10
Table 3 – Get Attributes service parameters .15
Table 4 – Set Attributes service parameters.16
Table 5 – Error indication parameters .16
Table 6 – Connect service parameters .17
Table 7 – Disconnect service parameters.17
Table 8 – Start scan service parameters .18
Table 9 – Stop scan service parameters .18
Table 10 – M1 Verify slave configuration service parameters .25
Table 11 – Stop scan service parameters .26
Table 12 – M2 Verify slave configuration service parameters .27
Table 13 – Get Attributes service parameters .30
Table 14 – Set Attributes service parameters.30
Table 15 – Error indication parameters .31

61158-5-18 © IEC:2007(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
INDUSTRIAL COMMUNICATION NETWORKS –
FIELDBUS SPECIFICATIONS –
Part 5-18: Application layer service definition - Type 18 elements

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regi
...