iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN IEC 60749-18:2019

(Main)

Semiconductor devices - Mechanical and climatic test methods - Part 18: Ionizing radiation (total dose)

Semiconductor devices - Mechanical and climatic test methods - Part 18: Ionizing radiation (total dose)

IEC 60749-18:2019 is available as IEC 60749-18:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60749-18:2019 provides a test procedure for defining requirements for testing packaged semiconductor integrated circuits and discrete semiconductor devices for ionizing radiation (total dose) effects from a cobalt-60 (60Co) gamma ray source. Other suitable radiation sources can be used. This document addresses only steady-state irradiations, and is not applicable to pulse type irradiations. It is intended for military- and aerospace-related applications. It is a destructive test. This edition includes the following significant technical changes with respect to the previous edition: - updates to subclauses to better align the test method with MIL-STD 883J, method 1019, including the use of enhanced low dose rate sensitivity (ELDRS) testing; - addition of a Bibliography, which includes ASTM standards relevant to this test method.

Halbleiterbauelemente - Mechanische und klimatische Prüfverfahren - Teil 18: Ionisierende Strahlung (Gesamtdosis)

Dispositifs à semiconducteurs - Méthodes d’essais mécaniques et climatiques - Partie 18: Rayonnements ionisants (dose totale)

IEC 60749-18:2019 est disponible sous forme de IEC 60749-18:2019 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L’IEC 60749-18:2019 présente une procédure d’essai permettant de définir les exigences pour soumettre à essai des circuits intégrés à semiconducteurs sous boîtier et des dispositifs discrets à semiconducteurs, concernant les effets des rayonnements ionisants (dose totale) provenant d’une source de rayons gamma au cobalt-60 (60Co). D’autres sources de rayonnements appropriées peuvent être utilisées. Le présent document ne concerne que les irradiations continues et ne s’applique pas aux irradiations pulsées. Il est destiné aux applications des domaines militaire et aérospatial. Il s’agit d’un essai destructif. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente: - mises à jour apportées aux paragraphes afin de mieux aligner la méthode d’essai avec la méthode 1019 du document MIL-STD 883J, comprenant l’utilisation de l’essai de sensibilité accrue au faible débit de dose (ELDRS); - ajout d’une bibliographie, comprenant les normes ASTM correspondant à la présente méthode d’essai.

Polprevodniški elementi - Metode za mehansko in klimatsko preskušanje - 18. del: Ionizirajoče sevanje (skupni odmerek) (IEC 60749-18:2019)

Ta del standarda IEC 60749 vsebuje preskusni postopek za določanje zahtev za preskušanje pakiranih polprevodniških integriranih vezij in diskretnih polprevodniških elementov, potrebnih za ugotavljanje učinkov ionizirajočega sevanja (skupni odmerek) iz vira gama žarkov kobalta-60 (60Co). Uporabiti je mogoče tudi druge primerne vire sevanja. V tem postopku so predstavljeni štirje preskusi: a) standardni preskus obsevanja pri sobni temperaturi; b) preskus obsevanja pri povišani temperaturi/kriogeni temperaturi; c) preskus pospešenega žarjenja; d) preskus povečane občutljivosti na majhne odmerke (ELDRS). Preskus pospešenega žarjenja ocenjuje, kako pomembni so učinki ionizirajočega sevanja na elemente pri nizkih odmerkih ali nekaterih drugih vrstah uporabe, kjer je učinek na elemente odvisen od časa. Preskus ELDRS določa, ali se naprave z bipolarnimi linearnimi komponentami občutneje poškodujejo zaradi sevanja z majhnimi odmerki. Dokument obravnava samo enakomerno obsevanje in se ne uporablja za impulzno obsevanje. Namenjen je za vojaško uporabo in uporabo v vesolju. Preskus v dokumentu lahko povzroči resno poslabšanje električnih lastnosti obsevanih naprav in se zato obravnava kot porušitveni preskus.

General Information

Status
Published
Publication Date
30-May-2019
Withdrawal Date
14-May-2022
ICS
31.080.01 - Semiconductor devices in general
Technical Committee
CLC/SR 47 - Semiconductor devices
Drafting Committee
IEC/TC 47 - IEC_TC_47
Current Stage
6060 - Document made available - Publishing
Start Date
31-May-2019
Completion Date
31-May-2019
Ref Project
SIST EN IEC 60749-18:2019 - Semiconductor devices - Mechanical and climatic test methods - Part 18: Ionizing radiation (total dose) (IEC 60749-18:2019)

Relations

Replaces
EN 60749-18:2003 - Semiconductor devices - Mechanical and climatic test methods - Part 18: Ionizing radiation (total dose)
Effective Date
23-Jan-2023

Buy Standard

EN IEC 60749-18:2019EN IEC 60749-18:2019
PreviousNext
Standard
EN IEC 60749-18:2019
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 60749-18:2019
01-september-2019
Nadomešča:
SIST EN 60749-18:2004
Polprevodniški elementi - Metode za mehansko in klimatsko preskušanje - 18. del:
Ionizirajoče sevanje (skupni odmerek) (IEC 60749-18:2019)
Semiconductor devices - Mechanical and climatic test methods - Part 18: Ionizing
radiation (total dose) (IEC 60749-18:2019)
Halbleiterbauelemente - Mechanische und klimatische Prüfverfahren - Teil 18:
Ionisierende Strahlung (Gesamtdosis) (IEC 60749-18:2019)
Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie
18: Rayonnements ionisants (dose totale) (IEC 60749-18:2019)
Ta slovenski standard je istoveten z: EN IEC 60749-18:2019
ICS:
31.080.01 Polprevodniški elementi Semiconductor devices in
(naprave) na splošno general
SIST EN IEC 60749-18:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN IEC 60749-18:2019

---------------------- Page: 2 ----------------------

SIST EN IEC 60749-18:2019


EUROPEAN STANDARD EN IEC 60749-18

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2019
ICS 31.080.01 Supersedes EN 60749-18:2003
English Version
Semiconductor devices - Mechanical and climatic test methods -
Part 18: Ionizing radiation (total dose)
(IEC 60749-18:2019)
Dispositifs à semiconducteurs - Méthodes d'essais Halbleiterbauelemente - Mechanische und klimatische
mécaniques et climatiques - Partie 18: Rayonnements Prüfverfahren - Teil 18: Ionisierende Strahlung
ionisants (dose totale) (Gesamtdosis)
(IEC 60749-18:2019) (IEC 60749-18:2019)
This European Standard was approved by CENELEC on 2019-05-15. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 60749-18:2019 E

---------------------- Page: 3 ----------------------

SIST EN IEC 60749-18:2019
EN IEC 60749-18:2019 (E)
European foreword
The text of document 47/2539/FDIS, future edition 2 of IEC 60749-18, prepared by IEC/TC 47
"Semiconductor devices" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 60749-18:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-02-15
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-05-15
document have to be withdrawn

This document supersedes EN 60749-18:2003.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 60749-18:2019 was approved by CENELEC as a European
Standard without any modification.


2

---------------------- Page: 4 ----------------------

SIST EN IEC 60749-18:2019



IEC 60749-18

®


Edition 2.0 2019-04




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











Semiconductor devices – Mechanical and climatic test methods –

Part 18: Ionizing radiation (total dose)




Dispositifs à semiconducteurs – Méthodes d’essais mécaniques et climatiques –

Partie 18: Rayonnements ionisants (dose totale)
















INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 31.080.01 ISBN 978-2-8322-6755-4




Warning
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 60749-5:2024(Main)
Semiconductor devices - Mechanical and climatic test methods - Part 5: Steady-state temperature humidity bias life test
SIST EN IEC 60749-5:2024

IEC 60749-5:2023 is available as IEC 60749-5:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60749-5:2023 provides a steady-state temperature and humidity bias life test to evaluate the reliability of non-hermetic packaged semiconductor devices in humid environments. This test method is considered destructive. This edition includes the following significant technical changes with respect to the previous edition: a) The specification of the test equipment is changed to require the need to minimize relative humidity gradients and maximize air flow between semiconductor devices under test; b) The specification of the test equipment fixtures is changed to require the avoidance of condensation on devices under test and on electrical fixtures connecting the devices to the test equipment; c) replacement of references to “virtual junction” with “die”.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63287-2:2023(Main)
Semiconductor devices - Guidelines for reliability qualification plans - Part 2: Concept of mission profile
SIST EN IEC 63287-2:2023

This part of IEC 63287 gives guidelines for the development of reliability qualification plans using the concept of mission profile, based on the environmental conditioning and proposed usage of the product. This document is not intended for military- and space-related applications.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60749-37:2022(Main)
Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer
SIST EN IEC 60749-37:2023

IEC 60749-37:2022 is available as IEC 60749-37:2022 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60749-37:2022 provides a test method that is intended to evaluate and compare drop performance of surface mount electronic components for handheld electronic product applications in an accelerated test environment, where excessive flexure of a circuit board causes product failure. The purpose is to standardize the test board and test methodology to provide a reproducible assessment of the drop test performance of surface-mounted components while producing the same failure modes normally observed during product level test. This edition includes the following significant technical changes with respect to the previous edition: - correction of a previous technical error concerning test conditions; - updates to reflect improvements in technology.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60749-10:2022(Main)
Semiconductor devices - Mechanical and climatic test methods - Part 10: Mechanical shock - Device and subassembly
SIST EN IEC 60749-10:2022

IEC 60749-10:2022 is intended to evaluate devices in the free state and assembled to printed wiring boards for use in electrical equipment. The method is intended to determine the compatibility of devices and subassemblies to withstand moderately severe shocks. The use of subassemblies is a means to test devices in usage conditions as assembled to printed wiring boards. Mechanical shock due to suddenly applied forces, or abrupt change in motion produced by handling, transportation or field operation can disturb operating characteristics, particularly if the shock pulses are repetitive. This is a destructive test intended for device qualification. This edition cancels and replaces the first edition published in 2002. This edition includes the following significant technical changes with respect to the previous edition:
covers both unattached components and components attached to printed wiring boards;
tolerance limits modified for peak acceleration and pulse duration;
mathematical formulae added for velocity change and equivalent drop height.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60749-28:2022(Main)
Semiconductor devices - Mechanical and climatic test methods - Part 28: Electrostatic discharge (ESD) sensitivity testing - Charged device model (CDM) - device level
SIST EN IEC 60749-28:2022

IEC 60749-28:2022 is available as IEC 60749-28:2022 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60749-28:2022 establishes the procedure for testing, evaluating, and classifying devices and microcircuits according to their susceptibility (sensitivity) to damage or degradation by exposure to a defined field-induced charged device model (CDM) electrostatic discharge (ESD). All packaged semiconductor devices, thin film circuits, surface acoustic wave (SAW) devices, opto-electronic devices, hybrid integrated circuits (HICs), and multi-chip modules (MCMs) containing any of these devices are to be evaluated according to this document. To perform the tests, the devices are assembled into a package similar to that expected in the final application. This CDM document does not apply to socketed discharge model testers. This document describes the field-induced (FI) method. An alternative, the direct contact (DC) method, is described in Annex J. The purpose of this document is to establish a test method that will replicate CDM failures and provide reliable, repeatable CDM ESD test results from tester to tester, regardless of device type. Repeatable data will allow accurate classifications and comparisons of CDM ESD sensitivity levels. This edition includes the following significant technical changes with respect to the previous edition: - a new subclause and annex relating to the problems associated with CDM testing of integrated circuits and discrete semiconductors in very small packages; - changes to clarify cleaning of devices and testers.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60749-39:2022(Main)
Semiconductor devices - Mechanical and climatic test methods - Part 39: Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components
SIST EN IEC 60749-39:2022

IEC 60749-39:2021 is available as IEC 60749-39:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60749-39:2021 details the procedures for the measurement of the characteristic properties of moisture diffusivity and water solubility in organic materials used in the packaging of semiconductor components. These two material properties are important parameters for the effective reliability performance of plastic packaged semiconductors after exposure to moisture and being subjected to high-temperature solder reflow. This edition includes the following significant technical changes with respect to the previous edition: - updated procedure for "dry weight" determination.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63287-1:2021(Main)
Semiconductor devices - Generic semiconductor qualification guidelines - Part 1: Guidelines for IC reliability qualification
SIST EN IEC 63287-1:2021

IEC 63287-1:2021 gives guidelines for reliability qualification plans of semiconductor integrated circuit products. This document is not intended for military- and space-related applications. NOTE 1 The manufacturer can use flexible sample sizes to reduce cost and maintain reasonable reliability by this guideline adaptation based on EDR-4708, AEC Q100, JESD47 or other relevant document can also be applicable if it is specified. NOTE 2 The Weibull distribution method used in this document is one of several methods to calculate the appropriate sample size and test conditions of a given reliability project. This first edition of IEC 63287-1 cancels and replaces the first edition of IEC 60749-43 published in 2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
the document has been renamed and renumbered to distinguish it from the IEC 60749 (all parts);
a new section concerning the concept of "family" has been added with appropriate renumbering of the existing text.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60749-20:2020(Main)
Semiconductor devices - Mechanical and climatic test methods - Part 20: Resistance of plastic encapsulated SMDs to the combined effect of moisture and soldering heat
SIST EN IEC 60749-20:2020

IEC 60749-20:2020 is available as IEC 60749-20:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60749-20:2020 provides a means of assessing the resistance to soldering heat of semiconductors packaged as plastic encapsulated surface mount devices (SMDs). This test is destructive. This edition includes the following significant technical changes with respect to the previous edition: - incorporation of a technical corrigendum to IEC 60749-20:2008 (second edition ); - inclusion of new Clause 3; - inclusion of explanatory notes.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60749-15:2020(Main)
Semiconductor devices - Mechanical and climatic test methods - Part 15: Resistance to soldering temperature for through-hole mounted devices
SIST EN IEC 60749-15:2020

IEC 60749-15:2020 is available as IEC 60749-15:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60749-15:2020 describes a test used to determine whether encapsulated solid state devices used for through-hole mounting can withstand the effects of the temperature to which they are subjected during soldering of their leads by using wave soldering. In order to establish a standard test procedure for the most reproducible methods, the solder dip method is used because of its more controllable conditions. This procedure determines whether devices are capable of withstanding the soldering temperature encountered in printed wiring board assembly operations, without degrading their electrical characteristics or internal connections. This test is destructive and may be used for qualification, lot acceptance and as a product monitor. The heat is conducted through the leads into the device package from solder heat at the reverse side of the board. This procedure does not simulate wave soldering or reflow heat exposure on the same side of the board as the package body. This edition includes the following significant technical changes with respect to the previous edition: - inclusion of new Clause 3, Terms and definitions; - clarification of the use of a soldering iron for producing the heating effect; - inclusion an option to use accelerated ageing.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60749-30:2020(Main)
Semiconductor devices - Mechanical and climatic test methods - Part 30: Preconditioning of non-hermetic surface mount devices prior to reliability testing
SIST EN IEC 60749-30:2020

IEC 60749-30:2020 is available as IEC 60749-30:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60749-30:2020 establishes a standard procedure for determining the preconditioning of non-hermetic surface mount devices (SMDs) prior to reliability testing. The test method defines the preconditioning flow for non-hermetic solid-state SMDs representative of a typical industry multiple solder reflow operation. These SMDs are subjected to the appropriate preconditioning sequence described in this document prior to being submitted to specific in-house reliability testing (qualification and/or reliability monitoring) in order to evaluate long term reliability (impacted by soldering stress). This edition includes the following significant technical changes with respect to the previous edition: - inclusion of new Clause 3; - expansion of 6.7 on solder reflow; - inclusion of explanatory notes and clarifications.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day