EN 61326-2-3:2006
(Main)Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning
part of IEC 61326 specifies more detailed test configurations, operational conditions and performance criteria for transducers with integrated or remote signal conditioning.applies only to transducers characterized by their ability to transform, with the aid of an auxiliary energy source, a non-electric quantity to a process-relevant electrical signal, and to output the signal at one or more ports.
Elektrische Mess-, Steuer-, Regel- und Laborgeräte - EMV-Anforderungen --Teil 2-3: Besondere Anforderungen - Prüfanordnung, Betriebsbedingungen und Leistungsmerkmale für Messgrößenumformer mit integrierter oder abgesetzter Signalaufbereitung
Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la CEM - Partie 2-3: Exigences particulières - Configurations d'essai, conditions de fonctionnement et critères d'aptitude à la fonction des transducteurs avec un système de conditionnement du signal intégré ou à distance
spécifie de façon plus détaillée les configurations d'essai, les conditions de fonctionnement et les critères d'aptitude à la fonction des transducteurs ayant un conditionnement de signal intégré ou à distance.uniquement aux transducteurs caractérisés par leur capacité à transformer, avec l'aide d'une source d'énergie auxiliaire, une grandeur non électrique en un signal électrique approprié pour un procédé, et à fournir un signal sur un ou plusieurs accès.
Električna oprema za merjenje, kontrolo in laboratorijsko uporabo - Zahteve za elektromagnetno združljivost (EMC) - 2-3. del: Posebne zahteve - Preskusna konfiguracija, obratovalni pogoji in merila za lastnosti pretvornikov z vgrajenim ali daljinskim kondicioniranjem signalov (IEC 61326-2-3:2006)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2007
(OHNWULþQDRSUHPD]DPHUMHQMHNRQWURORLQODERUDWRULMVNRXSRUDER=DKWHYH]D
HOHNWURPDJQHWQR]GUXåOMLYRVW (0& GHO 3RVHEQH]DKWHYH3UHVNXVQD
NRQILJXUDFLMDREUDWRYDOQLSRJRMLLQPHULOD]DODVWQRVWLSUHWYRUQLNRY]YJUDMHQLPDOL
GDOMLQVNLPNRQGLFLRQLUDQMHPVLJQDORY ,(&
Electrical equipment for measurement, control and laboratory use - EMC requirements --
Part 2-3: Particular requirements - Test configuration, operational conditions and
performance criteria for transducers with integrated or remote signal conditioning
Elektrische Mess-, Steuer-, Regel- und Laborgeräte - EMV-Anforderungen --Teil 2-3:
Besondere Anforderungen - Prüfanordnung, Betriebsbedingungen und
Leistungsmerkmale für Messgrößenumformer mit integrierter oder abgesetzter
Signalaufbereitung
Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la
CEM -- Partie 2-3: Exigences particulières - Configurations d'essai, conditions de
fonctionnement et critères d'aptitude à la fonction des transducteurs avec un système de
conditionnement du signal intégré ou à distance
Ta slovenski standard je istoveten z: EN 61326-2-3:2006
ICS:
25.040.40
33.100.01
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 61326-2-3
NORME EUROPÉENNE
August 2006
EUROPÄISCHE NORM
ICS 33.100; 25.040.40 Supersedes EN 61326:1997 + A1:1998 + A2:2001 + A3:2003
English version
Electrical equipment for measurement, control and laboratory use -
EMC requirements
Part 2-3: Particular requirements -
Test configuration, operational conditions and performance criteria
for transducers with integrated or remote signal conditioning
(IEC 61326-2-3:2006)
Matériel électrique de mesure, Elektrische Mess-, Steuer-, Regel- und
de commande et de laboratoire - Laborgeräte -
Exigences relatives à la CEM EMV-Anforderungen
Partie 2-3: Exigences particulières - Teil 2-3: Besondere Anforderungen -
Configurations d'essai, conditions de Prüfanordnung, Betriebsbedingungen
fonctionnement et critères d'aptitude und Leistungsmerkmale für
à la fonction des transducteurs avec Messgrößenumformer mit integrierter
un système de conditionnement oder abgesetzter Signalaufbereitung
du signal intégré ou à distance (IEC 61326-2-3:2006)
(CEI 61326-2-3:2006)
This European Standard was approved by CENELEC on 2006-08-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61326-2-3:2006 E
Foreword
The text of document 65A/477/FDIS, future edition 1 of IEC 61326-2-3, prepared by SC 65A, System
aspects, of IEC TC 65, Industrial-process measurement and control, was submitted to the IEC-CENELEC
parallel vote and was approved by CENELEC as EN 61326-2-3 on 2006-08-01.
The EN 61326 series supersedes EN 61326:1997 + corrigendum September 1998 + A1:1998 + A2:2001
+ A3:2003.
This part of EN 61326 is to be used in conjunction with EN 61326-1 and follows the same numbering of
clauses, subclauses, tables and figures as that standard.
When a particular subclause of Part 1 is not mentioned in this part, that subclause applies as far as is
reasonable. When this standard states "addition", "modification" or "replacement", the relevant text in
Part 1 is to be adapted accordingly.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-05-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-08-01
This European Standard has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association and covers essential requirements of
EC Directive 89/336/EEC. See Annex ZZ.
NOTE The following numbering system is used:
- subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1;
- unless notes are in a new subclause or involve notes in part 1, they are numbered starting from 101 including those in a replaced
clause or subclause;
- additional annexes are lettered AA, BB, etc.
Annexes ZA and ZZ have been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61326-2-3:2006 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 61326-2-3:2006
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
Addition to Annex ZA of EN 61326-1:2006:
1)
IEC 60050-300 – International Electrotechnical Vocabulary - – –
Electrical and electronic measurements and
measuring instruments
Part 311: General terms relating to
measurements
Part 312: General terms relating to electrical
measurements
Part 313: Types of electrical measuring
instruments
Part 314: Specific terms according to the
type of instrument
1)
Undated reference.
Annex ZZ
(informative)
Coverage of Essential Requirements of EC Directives
This European Standard has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association and within its scope the standard covers all
relevant essential requirements as given in Article 4 of the EC Directive 89/336/EEC.
Compliance with this standard provides one means of conformity with the specified essential
requirements of the Directive concerned.
WARNING: Other requirements and other EC Directives may be applicable to the products falling within
the scope of this standard.
___________
NORME CEI
INTERNATIONALE
IEC
61326-2-3
INTERNATIONAL
Première édition
STANDARD
First edition
2006-07
Matériel électrique de mesure, de commande
et de laboratoire – Exigences relatives à la CEM –
Partie 2-3:
Exigences particulières – Configurations d’essai,
conditions de fonctionnement et critères
d’aptitude à la fonction des transducteurs
avec un système de conditionnement du signal
intégré ou à distance
Electrical equipment for measurement, control
and laboratory use – EMC requirements –
Part 2-3:
Particular requirements – Test configuration,
operational conditions and performance criteria
for transducers with integrated or remote signal
conditioning
IEC 2006 Droits de reproduction réservés Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
U
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue
61326-2-3 IEC:2006 – 3 –
CONTENTS
FOREWORD.7
1 Scope.11
2 Normative references .15
3 Terms and definitions .15
4 General .17
5 EMC test plan.17
5.1 General .17
5.2 Configuration of EUT during testing.17
5.3 Operation conditions of EUT during testing.17
5.4 Specification of performance criteria .17
5.5 Test description.19
6 Immunity requirements .19
6.1 Conditions during the tests .19
6.2 Immunity test requirements .19
6.3 Random aspects .21
6.4 Performance criteria .21
7 Emission requirements .23
7.1 Conditions during measurements .23
7.2 Emission limits .23
8 Test results and test report.23
Annex AA (normative) Additional requirements and exceptions for specific types of
transducers – Transducers for measurement of tension and compressive forces (force
transducers) .25
Annex BB (normative) Additional requirements and exceptions for specific types of
transducers – Transducers for measurement of pressure (pressure transducers) .35
Annex CC (normative) Additional requirements and exceptions for specific types of
transducers – Transducers for measurement of temperature (temperature transducer).43
Figure 101 – Example of a transducer with integrated signal conditioning .13
Figure 102 – Example of a transducer with remote signal conditioning.13
Figure AA.1 – Example of the configuration of a force transducer with remote
measured-value processing .27
Figure AA.2 – Additional maximum measuring error (f ) versus the maximum
z
measuring error (f ) for continuous disturbances .31
y
Figure AA.3 – Additional maximum measuring error (f ) versus the maximum
z
measuring error (f ) for transient disturbances.33
y
Figure BB.1 – Example of the configuration of a pressure transducer .37
Figure BB.2 – Additional maximum measuring error (f ) versus the maximum
z
measuring error (f ) .41
y
61326-2-3 IEC:2006 – 5 –
Figure CC.1 – Example of the configuration of a temperature transducer with sensor
and processing unit in the same housing .45
Figure CC.2 – Example of the configuration of a temperature transducer with remote
measured-value processing .45
Figure CC.3 – Additional maximum measuring error (f ) versus the maximum measuring
z
error related to the measurement span (f ) a) for continuous disturbances (Table CC.2) b)
y
for transient disturbances (Table 10.3).51
Table 101 – Performance criteria for the different functions .21
Table AA.1 – Circuitry actions for generating an output signal for simulation of a
mechanical load on the transducer.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.