EN IEC 62386-207:2018
(Main)Digital addressable lighting interface - Part 207: Particular requirements for control gear - LED modules (device type 6)
Digital addressable lighting interface - Part 207: Particular requirements for control gear - LED modules (device type 6)
IEC 62386-207:2018 specifies a bus system for control by digital signals of electronic ligthing equipment which is in line with the requirements of IEC 61347 (all parts), with the addition of DC supplies. This second edition cancels and replaces the first edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
fast fade time has been redefined;
short circuit and open circuit have been deleted;
physical selection has been deleted;
dimming curve selection has been moved to a separate part;
load increase, load decrease and reference measurement have been moved to a separate part;
thermal gear and lamp protection have been moved to separate parts;
LED module integrated has been moved to a separate part;
link to IEC 62386-102 error bits has been clarified;
the following commands have been deleted:
ENABLE CURRENT PROTECTOR
DISABLE CURRENT PROTECTOR
QUERY POSSIBLE OPERATING MODES
QUERY SHORT CIRCUIT
QUERY OPEN CIRCUIT
QUERY CURRENT PROTECTOR ACTIVE
QUERY CURRENT PROTECTOR ENABLED
QUERY OPERATING MODE
Digital adressierbare Schnittstelle für die Beleuchtung - Teil 207: Besondere Anforderungen an Betriebsgeräte - LED-Module (Gerätetyp 6)
Interface d’éclairage adressable numérique - Partie 207: Exigences particulières pour les appareillages de commande - Modules de LED (dispositifs de type 6)
L’IEC 62386-207:2018 spécifie un système à bus pour la commande par des signaux numériques des appareils d'éclairage électroniques conformes aux exigences de l'IEC 61347 (toutes les parties), en ajoutant les alimentations en courant continu. Cette deuxième édition annule et remplace la première édition parue en 2009. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
le temps de variation rapide a été redéfini;
les courts-circuits et les circuits ouverts ont été supprimés;
la sélection physique a été supprimée;
la sélection de la courbe de gradation a été déplacée dans une autre partie;
l’augmentation de charge, la chute de charge et le mesurage de référence ont été déplacés dans une autre partie;
la protection thermique de l'appareillage et la protection thermique de la lampe ont été déplacées dans d’autres parties;
les modules de LED intégrés ont été déplacés dans une autre partie;
le lien avec les bits d’erreur décrits dans l’IEC 62386-102 a été clarifié;
les commandes suivantes ont été supprimées:
ENABLE CURRENT PROTECTOR
DISABLE CURRENT PROTECTOR
QUERY POSSIBLE OPERATING MODES
QUERY SHORT CIRCUIT
QUERY OPEN CIRCUIT
QUERY CURRENT PROTECTOR ACTIVE
QUERY CURRENT PROTECTOR ENABLED
QUERY OPERATING MODE
Digitalni naslovljivi vmesnik za razsvetljavo - 207. del: Posebne zahteve za krmilja - Moduli LED (naprava tipa 6) (IEC 62386-207:2018)
Ta del standarda IEC 62386 določa sistem vodil za krmiljenje elektronske opreme za razsvetljavo z digitalnimi signali, ki je v skladu z zahtevami standarda IEC 61347 (vsi deli), z dodatkom DC napajalnih enot.
Ta dokument se uporablja samo s standardi IEC 62386-102:2014 in IEC 62386-102:2014/AMD1: – krmilja, povezana z moduli LED.
OPOMBA: Zahteve za preskušanje posameznih proizvodov med proizvodnjo niso vključene.
General Information
Relations
Overview
EN IEC 62386-207:2018 (IEC 62386-207:2018) is the second-edition European/IEC standard that specifies DALI (digital addressable lighting interface) requirements for LED modules (device type 6) and their digital bus control. It defines a bus system for digital control of electronic lighting equipment in line with IEC 61347 series requirements, with the explicit addition of DC supplies. This edition (2018) supersedes EN 62386-207:2009 and introduces technical revisions to better align LED module control gear with the wider IEC 62386 DALI framework.
Key topics and technical requirements
- Scope & system context: Works together with IEC 62386‑101 (system components) and IEC 62386‑102 (control gear general requirements). Targets LED modules as DALI device type 6.
- Electrical and interface requirements: Specifies electrical behaviour for LED control gear operated via the DALI bus, including added support for DC supplies.
- Transmission and timing: Defines transmission protocol structure, timing and method of operation for digital commands and responses.
- Dimming and fade control: Updates on fast fade time (redefined in this edition). Note that full dimming curve selection has been moved to a separate part (IEC 62386‑218).
- Thermal and protection handling: Thermal gear and lamp protection functions have been reorganized into separate parts (e.g., thermal gear protection IEC 62386‑217).
- Feature & failure reporting: Defines feature information, failure status reporting and mappings to IEC 62386‑102 error bits.
- Command set changes: Several previously defined commands were removed (for example: ENABLE/DISABLE CURRENT PROTECTOR, QUERY SHORT CIRCUIT, QUERY OPEN CIRCUIT, QUERY OPERATING MODE, etc.).
- Modularity of parts: Several topics moved to dedicated parts (load referencing, thermal protections, non‑replaceable light source, etc.) to simplify device-type specifications.
Applications and who uses it
- Lighting product manufacturers: LED module and control-gear designers use this standard to ensure DALI compatibility and safe operation with AC and DC supplies.
- System integrators & specifiers: Building automation designers and lighting specifiers rely on the standard when specifying digital lighting installations and ensuring interoperability.
- Installers & test engineers: For commissioning, interoperability testing and compliance verification of DALI-controlled LED modules.
- Regulatory & conformity bodies: For certification, compliance assessment and harmonized national adoption (CENELEC/CLC adoption).
Related standards
- IEC/EN 61347 (lamp and control gear requirements)
- IEC 62386-101: General requirements – system components
- IEC 62386-102: General requirements – control gear
- IEC 62386-216, -217, -218, -222, -224 (adjacent device‑type or function parts referenced or moved to)
EN IEC 62386-207:2018 is essential reading for anyone designing, integrating or certifying DALI LED modules and digital lighting control gear to ensure interoperable, safe and modern LED lighting systems.
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2018
1DGRPHãþD
SIST EN 62386-207:2010
Digitalni naslovljivi vmesnik za razsvetljavo - 207. del: Posebne zahteve za krmilja -
Moduli LED (naprava tipa 6) (IEC 62386-207:2018)
Digital addressable lighting interface - Part 207: Particular requirements for control gear -
LED modules (device type 6) (IEC 62386-207:2018)
Digital adressierbare Schnittstelle für die Beleuchtung - Teil 207: Besondere
Anforderungen an Betriebsgeräte - LED-Module (Gerätetyp 6) (IEC 62386-207:2018)
Interface d'éclairage adressable numérique - Partie 207: Exigences particulières pour les
appareillages de commande - Modules de DEL (dispositifs de type 6) (IEC 62386-
207:2018)
Ta slovenski standard je istoveten z: EN IEC 62386-207:2018
ICS:
29.140.50 Instalacijski sistemi za Lighting installation systems
razsvetljavo
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 62386-207
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2018
ICS 29.140.50; 29.140.99 Supersedes EN 62386-207:2009
English Version
Digital addressable lighting interface - Part 207: Particular
requirements for control gear - LED modules (device type 6)
(IEC 62386-207:2018)
Interface d'éclairage adressable numérique - Partie 207: Digital adressierbare Schnittstelle für die Beleuchtung - Teil
Exigences particulières pour les appareillages de 207: Besondere Anforderungen an Betriebsgeräte - LED-
commande - Modules de LED (dispositifs de type 6) Module (Gerätetyp 6)
(IEC 62386-207:2018) (IEC 62386-207:2018)
This European Standard was approved by CENELEC on 2018-05-17. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62386-207:2018 E
European foreword
The text of document 34/483/FDIS, future edition 2 of IEC 62386-207, prepared by IEC/TC 34 "Lamps
and related equipment" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC
as EN IEC 62386-207:2018.
The following dates are fixed:
(dop) 2019-02-17
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2021-05-17
standards conflicting with the
document have to be withdrawn
This document supersedes EN 62386-207:2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62386-207:2018 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61347 (series) NOTE Harmonized as EN 61347 (series).
IEC 61347-1 NOTE Harmonized as EN 61347-1.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 62386-101 2014 Digital addressable lighting interface - Part EN 62386-101 2014
101: General requirements - System
components
1 2
+ A1 - + A1 -
IEC 62386-102 2014 Digital addressable lighting interface - Part EN 62386-102 2014
102: General requirements - Control gear
3 4
+ A1 - + A1 -
5 6
IEC 62386-216 - Digital addressable lighting interface – Part EN 62386-216 -
216: Particular requirements for control
gear – Load referencing (device type 15)
IEC 62386-217 2018 Digital addressable lighting interface – Part EN IEC 62386-217 2018
217: Particular requirements for control
gear – Thermal gear protection (device
type 16)
IEC 62386-218 2018 Digital addressable lighting interface – Part EN IEC 62386-218 2018
218: Particular requirements for control
gear – Dimming curve selection (device
type 17)
IEC 62386-222 2018 Digital addressable lighting interface – Part EN IEC 62386-222 2018
222: Particular requirements for control
gear – Thermal lamp protection (device
type 21)
IEC 62386-224 2018 Digital addressable lighting interface – Part EN IEC 62386-224 2018
224: Particular requirements for control
gear – Non-replaceable light source
(device type 23)
Under preparation. Stage at the time of publication: IEC TPUB 62386-101/AMD1:2018.
Under preparation. Stage at the time of publication: EN 62386-101:2014/prA1:2017.
Under preparation. Stage at the time of publication: IEC TFDIS 62386-102/AMD1:2018.
Under preparation. Stage at the time of publication: EN 62386-102:2014/prA1:2017.
Under preparation. Stage at the time of publication: IEC BPUB 62386-216:2018.
Under preparation. Stage at the time of publication: FprEN 62386-216:2018.
IEC 62386-207 ®
Edition 2.0 2018-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Digital addressable lighting interface –
Part 207: Particular requirements for control gear – LED modules (device type 6)
Interface d’éclairage adressable numérique –
Partie 207: Exigences particulières pour les appareillages de commande –
Modules de LED (dispositifs de type 6)
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.50; 29.140.99 ISBN 978-2-8322-5500-1
– 2 – IEC 62386-207:2018 © IEC 2018
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 8
2 Normative references . 8
3 Terms and definitions . 9
4 General . 9
4.1 General . 9
4.2 Version number . 9
5 Electrical specification . 9
6 Interface power supply . 9
7 Transmission protocol structure . 9
8 Timing . 9
9 Method of operation . 9
9.1 General . 9
9.2 Fast fade time . 9
9.3 Dimming curve . 10
9.3.1 General . 10
9.3.2 Dimming curve when IEC 62386-218 is implemented . 11
9.3.3 Dimming curve when IEC 62386-218 is not implemented . 11
9.4 Load deviation . 11
9.5 Thermal protection . 12
9.5.1 General . 12
9.5.2 Thermal gear protection . 12
9.5.3 Thermal lamp protection . 12
9.5.4 Behaviour of thermal protection . 12
9.6 Features information . 13
9.7 Failure status information . 13
9.8 LED module integrated . 13
10 Declaration of variables . 14
11 Definition of commands . 15
11.1 General . 15
11.2 Overview sheets . 15
11.3 Application extended commands . 17
11.3.1 General . 17
11.3.2 Configuration instructions . 17
11.3.3 Queries . 18
11.4 Special commands . 19
11.4.1 General . 19
11.4.2 ENABLE DEVICE TYPE (data) . 19
Bibliography . 20
Figure 1 – IEC 62386 graphical overview . 6
Table 1 – Fast fade times . 10
IEC 62386-207:2018 © IEC 2018 – 3 –
Table 2 – Control gear features . 13
Table 3 – Control gear failure status . 13
Table 4 – Control gear type . 14
Table 5 – Declaration of variables . 14
Table 6 – Application extended commands for this device type . 15
– 4 – IEC 62386-207:2018 © IEC 2018
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
DIGITAL ADDRESSABLE LIGHTING INTERFACE –
Part 207: Particular requirements for control gear –
LED modules (device type 6)
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62386-207 has been prepared by IEC technical committee 34:
Lamps and related equipment.
This second edition cancels and replaces the first edition published in 2009. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) fast fade time has been redefined;
b) short circuit and open circuit have been deleted;
c) physical selection has been deleted;
d) dimming curve selection has been moved to a separate part;
IEC 62386-207:2018 © IEC 2018 – 5 –
e) load increase, load decrease and reference measurement have been moved to a separate
part;
f) thermal gear and lamp protection have been moved to separate parts;
g) LED module integrated has been moved to a separate part;
h) link to IEC 62386-102 error bits has been clarified;
i) the following commands have been deleted:
• ENABLE CURRENT PROTECTOR
• DISABLE CURRENT PROTECTOR
• QUERY POSSIBLE OPERATING MODES
• QUERY SHORT CIRCUIT
• QUERY OPEN CIRCUIT
• QUERY CURRENT PROTECTOR ACTIVE
• QUERY CURRENT PROTECTOR ENABLED
• QUERY OPERATING MODE
The text of this International Standard is based on the following documents:
FDIS Report on voting
34/483/FDIS 34/504/RVD
Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
This Part 207 of IEC 62386 is intended to be used in conjunction with:
• Part 101, which contains general requirements for system components;
• Part 102, which contains general requirements for control gear.
A list of all parts in the IEC 62386 series, published under the general title: Digital
addressable lighting interface, can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under “http://webstore.iec.ch” in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this document indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
– 6 – IEC 62386-207:2018 © IEC 2018
INTRODUCTION
IEC 62386 contains several parts, referred to as series. The 1xx series includes the basic
specifications. Part 101 contains general requirements for system components, Part 102
extends this information with general requirements for control gear and Part 103 extends it
further with general requirements for control devices.
The 2xx parts extend the general requirements for control gear with lamp specific extensions
(mainly for backward compatibility with Edition 1 of IEC 62386) and with control gear specific
features.
The 3xx parts extend the general requirements for control devices with input device specific
extensions describing the instance types as well as some common features that can be
combined with multiple instance types.
This second edition of IEC 62386-207 is intended to be used in conjunction with IEC 62386-
101:2014, IEC 62386-101:2014/AMD1:—, IEC 62386-102:2014 and IEC 62386-
102:2014/AMD1:—, and with the various parts that make up the IEC 62386-2xx series for
control gear. The division into separately published parts provides for ease of future
amendments and revisions. Additional requirements will be added as and when a need for
them is recognized.
The setup of the standards is graphically represented in Figure 1 below.
2xx 2xx 2xx 2xx 2xx 3xx 3xx 3xx 3xx 3xx
102 General requirements - 103 General requirements -
Control gear Control devices
101 General requirements -
System components
IEC
Figure 1 – IEC 62386 graphical overview
This document, and the other parts that make up the IEC 62386-200 series, in referring to any
of the clauses of IEC 62386-1XX, specifies the extent to which such a clause is applicable;
the parts also include additional requirements, as necessary.
Where the requirements of any of the clauses of IEC 62386-1XX are referred to in this
document by the sentence “The requirements of IEC 62386-1XX, Clause “n” apply”, this
sentence is to be interpreted as meaning that
...
Frequently Asked Questions
EN IEC 62386-207:2018 is a standard published by CLC. Its full title is "Digital addressable lighting interface - Part 207: Particular requirements for control gear - LED modules (device type 6)". This standard covers: IEC 62386-207:2018 specifies a bus system for control by digital signals of electronic ligthing equipment which is in line with the requirements of IEC 61347 (all parts), with the addition of DC supplies. This second edition cancels and replaces the first edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: fast fade time has been redefined; short circuit and open circuit have been deleted; physical selection has been deleted; dimming curve selection has been moved to a separate part; load increase, load decrease and reference measurement have been moved to a separate part; thermal gear and lamp protection have been moved to separate parts; LED module integrated has been moved to a separate part; link to IEC 62386-102 error bits has been clarified; the following commands have been deleted: ENABLE CURRENT PROTECTOR DISABLE CURRENT PROTECTOR QUERY POSSIBLE OPERATING MODES QUERY SHORT CIRCUIT QUERY OPEN CIRCUIT QUERY CURRENT PROTECTOR ACTIVE QUERY CURRENT PROTECTOR ENABLED QUERY OPERATING MODE
IEC 62386-207:2018 specifies a bus system for control by digital signals of electronic ligthing equipment which is in line with the requirements of IEC 61347 (all parts), with the addition of DC supplies. This second edition cancels and replaces the first edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: fast fade time has been redefined; short circuit and open circuit have been deleted; physical selection has been deleted; dimming curve selection has been moved to a separate part; load increase, load decrease and reference measurement have been moved to a separate part; thermal gear and lamp protection have been moved to separate parts; LED module integrated has been moved to a separate part; link to IEC 62386-102 error bits has been clarified; the following commands have been deleted: ENABLE CURRENT PROTECTOR DISABLE CURRENT PROTECTOR QUERY POSSIBLE OPERATING MODES QUERY SHORT CIRCUIT QUERY OPEN CIRCUIT QUERY CURRENT PROTECTOR ACTIVE QUERY CURRENT PROTECTOR ENABLED QUERY OPERATING MODE
EN IEC 62386-207:2018 is classified under the following ICS (International Classification for Standards) categories: 29.140.50 - Lighting installation systems; 29.140.99 - Other standards related to lamps. The ICS classification helps identify the subject area and facilitates finding related standards.
EN IEC 62386-207:2018 has the following relationships with other standards: It is inter standard links to EN 62386-207:2009. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase EN IEC 62386-207:2018 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CLC standards.
Die Norm EN IEC 62386-207:2018 ist ein entscheidendes Dokument im Bereich der digitalen adressierbaren Lichtsteuerung, speziell für LED-Module (Gerätetyp 6). Der Anwendungsbereich dieser Norm umfasst ein Bussystem zur Steuerung elektronischer Beleuchtungseinrichtungen durch digitale Signale, das die Anforderungen der IEC 61347 (alle Teile) berücksichtigt und zusätzlich Gleichstromversorgungen integriert. Diese überarbeitete Auflage stellt eine technische Revision dar, die die vorherige Fassung von 2009 ersetzt. Eine der wesentlichen Stärken der EN IEC 62386-207:2018 ist die Neudefinition der schnellen Abblendzeit, was eine verbesserte Flexibilität und Anpassungsfähigkeit in der Lichtsteuerung ermöglicht. Die Streichung von Schaltkreisen wie Kurzschluss und Unterbrechung sowie die physische Auswahl verbessert die Handhabung und vereinfacht die Implementierung dieser Norm in verschiedene Systeme. Der Umzug der Dimmkurvenauswahl und der Lastmessungen in separate Teile zeigt die Ausrichtung auf eine modulares und benutzerfreundliches Design, das die Implementierung für Hersteller und Installateure erleichtert. Die Klarstellung der Verknüpfung zu den Fehlerbits gemäß IEC 62386-102 ist ebenfalls ein bemerkenswerter Fortschritt, da sie eine klarere Fehlerdiagnose und -behebung in digitalen Beleuchtungssystemen gewährleistet. Besonders hervorzuheben ist die Eliminierung von Befehlen wie „ENABLE CURRENT PROTECTOR“ und „QUERY OPERATING MODE“, die durch die Überarbeitung nicht mehr notwendig sind und somit die Komplexität und mögliche Fehlerquellen in der Kommunikation zwischen den Geräten reduzieren. Insgesamt ist die EN IEC 62386-207:2018 nicht nur eine Fortschreibung der Vorgängeraufschrift, sondern stellt durch bedeutende technische Änderungen eine angepasste und verbesserte Lösung für die Anforderungen der modernen Beleuchtungstechnik dar. Ihre Relevanz im Bereich der digitalen Lichtsteuerung wird durch die umfassende Berücksichtigung aktueller Technologien und Standards unterstrichen, wodurch sie sowohl für Hersteller als auch für Anwender von großer Bedeutung ist.
The EN IEC 62386-207:2018 standard provides comprehensive guidelines specific to the Digital Addressable Lighting Interface (DALI), particularly focusing on control gear for LED modules designated as device type 6. This international standard is pivotal in establishing a robust framework for electronic lighting equipment controlled via digital signals, ensuring compatibility with the broader IEC 61347 standards. One of the strengths of this standard is its emphasis on technical revision, which reflects the evolving nature of lighting technology. The updates made from the previous edition, including the redefinition of fast fade time, streamline the operational parameters of LED modules. This is particularly relevant in modern lighting systems where performance efficiency and reliability are paramount. Furthermore, the decision to relocate certain specifications, such as dimming curve selection and thermal gear protection to separate parts, enhances clarity and usability by reducing complexity within the core document. This restructuring allows manufacturers and designers to reference specific aspects of the standard without wading through extraneous information, thereby accelerating the implementation process for product development. The removal of several commands such as ENABLE CURRENT PROTECTOR and QUERY CURRENT PROTECTOR ENABLED indicates a shift towards simplification, enhancing the user experience for system integrators. It is crucial for professionals in the lighting industry to adapt to these changes, as they streamline operations and enhance the overall safety and functionality of LED installations. Moreover, the standard's clear linkage to IEC 62386-102 regarding error bits emphasizes the importance of error management in digital lighting systems, reinforcing the standard's relevance in promoting effective communication between devices. This aspect is integral in enhancing stability and performance within controlled lighting environments. In summary, the EN IEC 62386-207:2018 standard plays a vital role in standardizing control for LED modules, providing essential updates that reflect technological advancements. Its clear structure, focus on compatibility, and emphasis on operational efficiency make it a critical reference for professionals involved in the planning, design, and implementation of digital lighting solutions.
표준 EN IEC 62386-207:2018은 디지털 주소 지정 조명 인터페이스의 제어 기어에 대한 특정 요구사항을 규정하고 있으며, 특히 LED 모듈(장치 유형 6)에 중점을 두고 있습니다. 이 문서는 IEC 61347의 요구사항에 부합하는 전자 조명 장비를 디지털 신호로 제어하기 위한 버스 시스템을 상세히 설명합니다. 이 표준의 주요 강점 중 하나는 기술적인 개선 사항입니다. 첫 번째 판에서 나온 개정판으로, 빠른 페이드 시간의 재정의는 조명 장비의 응답성을 높이며 사용자의 요구에 더욱 적합하게 만듭니다. 또한, 단락 회로 및 개방 회로 요구 사항의 삭제는 시스템의 복잡성을 줄이고, 설치 및 유지보수 시의 편리함을 제공합니다. 또한, 조명 제어와 관련된 여러 기능들이 개별 부분으로 이동되었으며, 이는 사용자가 필요로 하는 기능을 보다 쉽게 접근하고 활용할 수 있게 합니다. 예를 들어, 조명 곡선 선택 및 부하 증가와 감소, 기준 측정 등이 개별적으로 정리되어 있어, 사용의 효율성을 극대화합니다. IEC 62386-102의 오차 비트와 관련된 링크가 명확해진 점도 주목할 만합니다. 이는 시스템의 안정성 및 오류 처리 능력을 개선합니다. 마지막으로, 여러 쿼리 명령의 삭제는 불필요한 복잡성을 줄이며, 사용자가 시스템을 보다 직관적으로 이해하고 운영하는 데 도움을 줍니다. 전반적으로 EN IEC 62386-207:2018 표준은 LED 모듈의 제어 시스템 설계 및 구현에 있어 매우 유용하며, 디지털 조명 시스템의 발전에 기여하는 핵심 문서로 평가됩니다.
EN IEC 62386-207:2018は、デジタル信号による電子照明機器の制御のためのバスシステムに関する標準を提供しており、IEC 61347の要件に適合しています。この標準は、LEDモジュール（デバイスタイプ6）に特有の要件を示しています。標準の改訂第2版は、2009年に発行された初版を取り消し、置き換えています。この技術的改訂には、前版に対する重要な変更が含まれており、特にファストフェードタイムの再定義や短絡および開放回路の削除、物理的選択の除去などが挙げられます。 この標準は、LEDモジュールの制御系に関する新たな見解をもたらし、負荷増加や減少に関する測定、サーマルギアやランプ保護に関する要件も分離されたパートに移動されている点が特徴です。これにより、制御装置を設計・実装する際に必要な明確さと柔軟性が強調され、製品の互換性と安全性が向上します。特に、エラービットに関するIEC 62386-102との関連が明確化されていることや、いくつかのコマンドが削除されたことで、システムの簡素化が図られています。 このEN IEC 62386-207:2018は、LEDモジュールの制御において非常に関連性が高く、進化した照明技術に適応するための強力な基盤を提供しています。標準の範囲は、製品設計者やエンジニアが新しい照明管理システムを構築する際に必要な指針となるでしょう。これにより、全体的な業界の品質向上、効率的なエネルギー使用、ユーザー体験の向上が期待されます。
La norme EN IEC 62386-207:2018 présente un cadre essentiel pour l'interface d'éclairage adressable numériquement, spécifiquement pour les modules LED (type d'appareil 6). Cette norme s'avère particulièrement pertinente dans le contexte actuel de la technologie d'éclairage, où l'efficacité énergétique et la gestion intelligente jouent un rôle primordial. Le champ d'application de cette norme est clair et bien défini, établissant un système de bus pour le contrôle par signaux numériques des équipements d'éclairage électroniques, tout en s'alignant avec les exigences de la norme IEC 61347. L'inclusion de systèmes d'alimentation en courant continu renforce davantage sa modernité et sa pertinence. La révision technique qu'elle introduit, remplaçant la première édition de 2009, assure que les utilisateurs disposent des informations les plus récentes en matière de sécurité et d'efficacité. Parmi les principales forces de cette norme, on note la redéfinition du temps de fondu rapide, ce qui améliore la précision et le contrôle des éclairages LED. Les modifications apportées, telles que la suppression de certaines commandes, contribuent à simplifier l'utilisation des équipements et à réduire la confusion lors de la mise en œuvre. En déplaçant la sélection de courbes de gradation et les mesures de charge vers des parties séparées, la norme permet une meilleure modularité et une gestion optimisée des ressources. La clarification du lien avec les bits d'erreur de la norme IEC 62386-102 accentue également la pertinence de cette norme pour les utilisateurs, facilitant une compréhension plus approfondie des erreurs potentielles qui pourraient survenir dans un système d'éclairage complexe. En somme, EN IEC 62386-207:2018 représente une avancée significative dans le domaine des interfaces d'éclairage numérique, grâce à ses exigences techniques spécifiques qui soutiennent le développement et l'intégration de technologies d'éclairage LED modernes, renforçant ainsi la sécurité, l'efficacité et la facilité d'utilisation dans les installations d'éclairage.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...