Tap-changers - Part 1: Performance requirements and test methods

Applies to on-load tap-changers of both resistor and reactor types, off-circuit tap-changers, and their motor drive mechanisms. Applies mainly to tap-changers immersed in transformer oil according to EN 60296 but may also be used for tap-changers with gas insulation or immersed in other insulating liquids.

Stufenschalter - Teil 1: Leistungsanforderungen und Prüfverfahren

Changeurs de prises - Partie 1: Prescriptions de performances et méthodes d'essai

S'applique aux changeurs de prises en charge aussi bien de type à résistance qu'à bobine d'inductance, aux changeurs de prises hors circuit et à leurs mécanismes d'entraînement à moteur. S'applique essentiellement aux changeurs de prises immergés dans de l'huile pour transformateur selon la EN 60296, mais peut également être utilisée pour des changeurs de prises à isolation gazeuse ou immergés dans d'autres liquides isolants.

Tap-changers - Part 1: Performance requirements and test methods (IEC 60214-1:2003)

General Information

Status
Withdrawn
Publication Date
10-Apr-2003
Withdrawal Date
28-Feb-2006
Technical Committee
Drafting Committee
Parallel Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
26-Jun-2017
Completion Date
26-Jun-2017

Relations

Effective Date
28-Jan-2023

Buy Standard

Standard
IEC 60214:1997
English language
38 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
EN 60214-1:2004
English language
63 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST IEC 60214:1997
01-oktober-1997
On-load-tap-changers
Ta slovenski standard je istoveten z:    IEC 60214:1989
ICS:
29.180 Transformatorji. Dušilke Transformers. Reactors
SIST IEC 60214:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60214-1:2004

---------------------- Page: 2 ----------------------

SIST EN 60214-1:2004

---------------------- Page: 3 ----------------------

SIST EN 60214-1:2004

---------------------- Page: 4 ----------------------

SIST EN 60214-1:2004

---------------------- Page: 5 ----------------------

SIST EN 60214-1:2004

---------------------- Page: 6 ----------------------

SIST EN 60214-1:2004

---------------------- Page: 7 ----------------------

SIST EN 60214-1:2004

---------------------- Page: 8 ----------------------

SIST EN 60214-1:2004

---------------------- Page: 9 ----------------------

SIST EN 60214-1:2004

---------------------- Page: 10 ----------------------

SIST EN 60214-1:2004

---------------------- Page: 11 ----------------------

SIST EN 60214-1:2004

---------------------- Page: 12 ----------------------

SIST EN 60214-1:2004

---------------------- Page: 13 ----------------------

SIST EN 60214-1:2004

---------------------- Page: 14 ----------------------

SIST EN 60214-1:2004

---------------------- Page: 15 ----------------------

SIST EN 60214-1:2004

---------------------- Page: 16 ----------------------

SIST EN 60214-1:2004

---------------------- Page: 17 ----------------------

SIST EN 60214-1:2004

---------------------- Page: 18 ----------------------

SIST EN 60214-1
...

SLOVENSKI SIST EN 60214-1:2004

STANDARD
februar 2004
Tap-changers - Part 1: Performance requirements and test methods (IEC 60214-
1:2003)
ICS 29.180 Referenčna številka
SIST EN 60214-1:2004(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 60214-1
NORME EUROPÉENNE
EUROPÄISCHE NORM April 2003

ICS 29.180 Supersedes EN 60214:1997


English version


Tap-changers
Part 1: Performance requirements and test methods
(IEC 60214-1:2003)


Changeurs de prises Stufenschalter
Partie 1: Prescriptions de performances Teil 1: Leistungsanforderungen
et méthodes d'essai und Prüfverfahren
(CEI 60214-1:2003) (IEC 60214-1:2003)





This European Standard was approved by CENELEC on 2003-03-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60214-1:2003 E

---------------------- Page: 2 ----------------------

EN 60214-1:2003 - 2 -
Foreword
The text of document 14/457/FDIS, future edition 1 of IEC 60214-1, prepared by IEC TC 14, Power
transformers, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60214-1 on 2003-03-01.

This European Standard supersedes EN 60214:1997.

The following dates were fixed:

– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2003-12-01

– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-03-01

Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, annexes A, B, C and ZA are normative and annex D is informative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60214-1:2003 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 60214-1:2003
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60060 Series High-voltage test techniques EN 60060 Series

IEC 60076-1 1993 Power transformers EN 60076-1 1997
(mod) Part 1: General A11 1997
A1 1999 A1 2000
A12 2002

IEC 60076-3 2000 Part 3: Insulation levels, dielectric tests EN 60076-3 2001
+ corr. December 2000 and external clearances in air

1)
IEC 60137 - Insulated bushings for alternating - -
voltages above 1 000 V

1)
IEC 60214-2 - Tap changers - -
Part 2: Application guide

2) 3)
IEC 60270 - High-voltage test techniques - Partial EN 60270 2001
discharge measurements

2)
IEC 60296 - Specification for unused mineral - -
insulating oils for transformers and
switchgear

2)
IEC 60354 - Loading guide for oil-immersed power - -
transformers

2) 3)
IEC 60529 - Degrees of pr
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.