CLC/TR 61158-1:2008
(Main)Industrial communication networks - Fieldbus specifications - Part 1: Overview and guidance for the IEC 61158 and IEC 61784 series
Industrial communication networks - Fieldbus specifications - Part 1: Overview and guidance for the IEC 61158 and IEC 61784 series
Superseded by CLC/TR 61158-1:2010
Industrielle Kommunikationsnetze - Feldbusse - Teil 1: Überblick und Leitfaden zu den Normen der Reihe IEC 61158 und IEC 61784
Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 1. del: Pregled in vodila za dokumente IEC 61158 in IEC 61784
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2009
1DGRPHãþD
SIST-TP CLC/TR 61158-1:2004
Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 1. del:
Pregled in vodila za dokumente IEC 61158 in IEC 61784
Industrial communication networks - Fieldbus specifications -- Part 1: Overview and
guidance for the IEC 61158 and IEC 61784 series
Industrielle Kommunikationsnetze - Feldbusse - Teil 1: Überblick und Leitfaden zu den
Normen der Reihe IEC 61158 und IEC 61784
Ta slovenski standard je istoveten z: CLC/TR 61158-1:2008
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.110 Omreževanje Networking
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
TECHNICAL REPORT
CLC/TR 61158-1
RAPPORT TECHNIQUE
December 2008
TECHNISCHER BERICHT
ICS 25.040; 35.100; 35.240.50 Supersedes CLC/TR 61158-1:2004
English version
Industrial communication networks -
Fieldbus specifications -
Part 1: Overview and guidance for the IEC 61158 and IEC 61784 series
(IEC/TR 61158-1:2007)
This Technical Report was approved by CENELEC on 2008-09-19.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. CLC/TR 61158-1:2008 E
Foreword
The text of the Technical Report IEC/TR 61158-1:2007, prepared by SC 65C, Industrial networks, of
IEC TC 65, Industrial-process measurement, control and automation, was submitted to vote in
accordance with the Internal Regulations, Part 2, Subclause 11.4.3.3 (simple majority) and was
approved by CENELEC as CLC/TR 61158-1 on 2008-09-19.
This Technical Report supersedes CLC/TR 61158-1:2004.
– deletion of the former Type 6 fieldbus, a placeholder for a Type 5 fieldbus data-link layer, and the
Type 1 application layer for lack of market relevance;
– addition of new types of fieldbuses: Types 11 to 20;
– generalization of the Type 1 radio, which is seldom used, to a more useful form;
– additional descriptions explaining the relation of EN 61158 to the EN 61784 family of companion
profiles and the structure of these profile documents;
– division of parts 3 through 6 of the third edition into multiple parts numbered 3-1, 3-2, …, 3-19; 4-1,
4-2, …, 4-19; 5-2, 5-3, …, 5-20; 6-2, 6-3, …, 6-20;
– presentation of the service description concepts used in the many application layer service
definitions: parts 5-2, 5-3, …, 5-20.
__________
Endorsement notice
The text of the Technical Report IEC/TR 61158-1:2007 was approved by CENELEC as a Technical
Report without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61158 series NOTE Harmonized in EN 61158 series (not modified).
IEC 61508 series NOTE Harmonized in EN 61508 series (not modified).
IEC 61784 series NOTE Harmonized in EN 61784 series (not modified).
IEC 61918 NOTE Harmonized as EN 61918:2008 (modified).
__________
IEC/TR 61158-1
Edition 2.0 2007-11
TECHNICAL
REPORT
Industrial communication networks – Fieldbus specifications –
Part 1: Overview and guidance for the IEC 61158 and IEC 61784 series
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XA
ICS 25.040; 35.100; 35.240.50 ISBN 2-8318-9370-4
– 2 – TR 61158-1 © IEC:2007(E)
CONTENTS
FOREWORD.4
1 Scope.6
2 Normative references .6
3 Abbreviations .6
4 Guidelines for implementers and users.6
4.1 Background and purpose.6
4.2 Supported options .7
4.3 Benefits from using a common and formal style.7
5 Concept of IEC 61158 series .7
6 Mapping onto the OSI Basic Reference Model.9
6.1 Overview .9
6.2 Physical layer service and protocol.10
6.3 Data-link layer service.11
6.4 Data-link layer protocol .12
6.5 Application layer service.12
6.6 Application layer protocol .13
7 Structure of IEC 61158 and IEC 61784 series.14
7.1 The IEC 61158 physical layer .14
7.2 The IEC 61158 data-link layer .14
7.3 The IEC 61158 application layer.14
7.4 IEC 61784-1 and IEC 61784-2 fieldbus profiles .15
7.5 IEC 61784-3 functional safety communication profiles .18
7.6 IEC 61784-5 installation profiles.19
8 Brief summary of the characteristics of each service and protocol for each type of
fieldbus .22
8.1 Summary of the physical layer service and protocol characteristics .22
8.2 Summary of data-link layer service characteristics .24
8.3 Summary of data-link layer protocol characteristics .25
8.4 Summary of application layer service characteristics .26
8.5 Summary of application layer protocol characteristics.28
9 Application layer service description concepts .30
9.1 Overview .30
9.2 Architectural relationships .30
9.3 Fieldbus application layer structure .32
9.4 Fieldbus application layer naming and addressing.44
9.5 Architecture summary.45
9.6 Notional FAL service procedures .46
9.7 Common FAL attributes.47
9.8 Common FAL service parameters.48
9.9 APDU size.49
10 Data type ASE.49
10.1 Overview .49
10.2 Formal definition of data type objects .52
Annex A (informative) Trade name declarations.54
Bibliography.56
TR 61158-1 © IEC:2007(E) – 3 –
Figure 1 – Generic fieldbus network.8
Figure 2 – Concept of DL/AL to separate service and protocol parts .9
Figure 3 – Basic fieldbus reference model .10
Figure 4 – General model of physical layer .11
Figure 5 – Relationship of the IEC 61158-3 and IEC 61158-4 series to other fieldbus
layers and to users of the fieldbus data-link service.11
Figure 6 – Relationship of the IEC 61158-5 and IEC 61158-6 series to other fieldbus
layers and to users of the fieldbus application service .12
Figure 7 – Structure of communication profile families .16
Figure 8 – Example of a CPF structure .17
Figure 9 – Document structure of IEC 61918 and the IEC 61784-5 series .21
Figure 10 – Relationship to the OSI Basic Reference Model .31
Figure 11 – Architectural positioning of the fieldbus application layer.31
Figure 12 – Client/server interactions.34
Figure 13 – Pull model interactions .35
Figure 14 – Push model interactions .35
Figure 15 – APOs services conveyed by the FAL .37
Figure 16 – Application entity structure .39
Figure 17 – Example FAL ASEs .40
Figure 18 – FAL management of objects .41
Figure 19 – ASE service conveyance.42
Figure 20 – Defined and established AREPs.44
Figure 21 – FAL architectural components .46
Figure 22 – Data-type class hierarchy example.50
Table 1 – OSI and IEC 61158 layers .10
Table 2 – CPF, CP, and type relations .18
Table A.1 – Trade names of CPFs and CPs .54
– 4 – TR 61158-1 © IEC:2007(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
INDUSTRIAL COMMUNICATION NETWORKS –
FIELDBUS SPECIFICATIONS –
Part 1: Overview and guidance for the IEC 61158 and IEC 61784 series
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as
“IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee
interested in the subject dealt with may participate in this preparatory work. International, governmental and
non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates
closely with the International Organization for Standardization (ISO) in accordance with conditions determined
by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that th
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.