Solar thermal electric plants - Part 3-2: Systems and components - General requirements and test methods for large-size parabolic-trough collectors

IEC 62862-3-2:2018 specifies the requirements and the test methods for the characterization of a large-size parabolic-trough collector. This document covers the determination of optical and thermal performance of parabolic-trough collectors, and the tracking accuracy of the collector one-axis tracking system. This test method is for outdoor testing only. This document applies to parabolic-trough collectors equipped with the manufacturer-supplied sun tracking mechanism.

Solarthermische Kraftwerke - Teil 3-2: Systeme und Komponenten - Allgemeine Anforderungen und Prüfverfahren für große Parabolrinnenkollektoren

Centrales électriques solaires thermodynamiques - Partie 3-2: Systèmes et composants - Exigences générales et méthodes d'essai des capteurs cylindro-paraboliques de grande taille

L'IEC 62862-3-2:2018 spécifie les exigences et méthodes d'essai pour la caractérisation d'un capteur cylindro-parabolique de grande taille. Le présent document couvre la détermination des performances optiques et thermiques des capteurs cylindro-paraboliques et la précision du système de suiveur à un axe du capteur. Cette méthode ne concerne que les essais en extérieur. Le présent document s'applique aux capteurs cylindro-paraboliques équipés d'un mécanisme suiveur du soleil fourni par le fabricant.

Sončne termoelektrarne - 3-2. del: Sistemi in komponente - Splošne zahteve in preskusne metode za velika parabolična korita (IEC 62862-3-2:2018)

IEC 62862-3-2:2018 določa zahteve in preskusne metode za karakterizacijo velikih paraboličnih korit. Dokument zajema določanje optičnih in toplotnih lastnosti paraboličnih korit ter natančnost sledenja enoosnega sledilnega sistema kolektorja. Ta preskusna metoda je namenjena samo za preskušanje na prostem. Dokument se uporablja za parabolična korita, opremljena z mehanizmom za sledenje soncu, ki ga zagotavlja proizvajalec.

General Information

Status
Published
Publication Date
25-Oct-2018
Withdrawal Date
13-Aug-2021
Current Stage
6060 - Document made available - Publishing
Start Date
26-Oct-2018
Completion Date
26-Oct-2018

Buy Standard

Standard
EN IEC 62862-3-2:2019 - BARVE
English language
27 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62862-3-2:2019
01-september-2019
Sončne termoelektrarne - 3-2. del: Sistemi in komponente - Splošne zahteve in
preskusne metode za velika parabolična korita (IEC 62862-3-2:2018)
Solar thermal electric plants - Part 3-2: Systems and components - General
requirements and test methods for large-size parabolic-trough collectors (IEC 62862-3-
2:2018)
Solarthermische Kraftwerke - Teil 3-2: Systeme und Komponenten - Allgemeine
Anforderungen und Prüfverfahren für Parabolrinnenkollektoren (IEC 62862-3-2:2018)
Centrales électriques solaires thermodynamiques - Partie 3-2: Systèmes et composants
- Exigences générales et méthodes d'essai des capteurs cylindro-paraboliques de
grande taille (IEC 62862-3-2:2018)
Ta slovenski standard je istoveten z: EN IEC 62862-3-2:2018
ICS:
27.160 Sončna energija Solar energy engineering
SIST EN IEC 62862-3-2:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN IEC 62862-3-2:2019

---------------------- Page: 2 ----------------------

SIST EN IEC 62862-3-2:2019


EUROPEAN STANDARD EN IEC 62862-3-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2018
ICS 27.160

English Version
Solar thermal electric plants - Part 3-2: Systems and
components - General requirements and test methods for large-
size parabolic-trough collectors
(IEC 62862-3-2:2018)
Centrales électriques solaires thermodynamiques - Partie 3- Solarthermische Kraftwerke - Teil 3-2: Systeme und
2: Systèmes et composants - Exigences générales et Komponenten - Allgemeine Anforderungen und
méthodes d'essai des capteurs cylindro-paraboliques de Prüfverfahren für Parabolrinnenkollektoren
grande taille (IEC 62862-3-2:2018)
(IEC 62862-3-2:2018)
This European Standard was approved by CENELEC on 2018-08-14. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62862-3-2:2018 E

---------------------- Page: 3 ----------------------

SIST EN IEC 62862-3-2:2019
EN IEC 62862-3-2:2018 (E)
European foreword
The text of document 117/87/FDIS, future edition 1 of IEC 62862-3-2, prepared by IEC/TC 117 "Solar
thermal electric plants" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC
as EN IEC 62862-3-2:2018.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2019-05-14
level by publication of an identical national
standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2021-08-14
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62862-3-2:2018 was approved by CENELEC as a
European Standard without any modification.

In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 62817:2014 NOTE Harmonized as EN 62817:2015 (not modified).

2

---------------------- Page: 4 ----------------------

SIST EN IEC 62862-3-2:2019
EN IEC 62862-3-2:2018 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.