EN 61753-084-2:2008

Fibre optic interconnecting devices and passive components performance standard - Part 084-2: Non connectorised single-mode 980/1550 nm WWDM devices for category C - Controlled environment

This part of IEC 61753 contains the minimum initial test and measurement requirements and severities which a fibre optic pigtailed 980/1 550 nm WWDM device must satisfy in order to be categorized as meeting the requirements of category C (controlled environments), as defined in Annex A of IEC 61753-1. The requirements cover devices with single-mode non-connectorised pigtails. The contents of the corrigendum of September 2008 have been included in this copy.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 084-2: Nicht mit Steckverbindern versehene Einmoden-980/1550 nm-WWDM-Bauteile für die Kategorie C - Kontrollierte Umgebung

Norme de qualité de fonctionnement des dispositifs d'interconnexion et composants passifs à fibres optiques - Partie 084-2: Dispositifs WWDM 980/1550 nm unimodaux non connectorisés pour catégorie C - Environnement contrôlé

La présente partie de la CEI 61753 contient l'essai initial, les exigences de mesures et les sévérités initiales qu'un dispositif à fibres optiques WWDM 980/1 550 nm à fibre amorce doit satisfaire, afin d'être conforme aux exigences de la catégorie C (environnements contrôlés), comme défini dans l'Annexe A de la CEI 61753-1. Ces exigences concernent les dispositifs avec fibres-amorces non-connectorisées unimodales. Le contenu du corrigendum de septembre 2008 a été pris en considération dans cet exemplaire.

Tehnični standard za optične spojne elemente in pasivne komponente - 084-2. del: Naprave za WWDM (širokopasovni valovni multipleks) 980/1550 nm z enorodnimi optičnimi vlakni brez konektorjev za kategorijo C - Nadzorovano okolje (IEC 61753-084-2:2007)

General Information

• Status: Published
• Publication Date: 12-Feb-2008
• Withdrawal Date: 31-Jan-2011
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Parallel Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 13-Feb-2008
• Completion Date: 13-Feb-2008
• Ref Project: SIST EN 61753-084-2:2008 - Fibre optic interconnecting devices and passive components performance standard -- Part 084-2: Non connectorised single-mode 980/1550 nm WWDM devices for category C - Controlled environment

Relations

• Replaced By: EN IEC 61753-084-02:2025 - Fibre optic interconnecting devices and passive components - Performance standard - Part 084-02: Non connectorised single-mode 980/1550 nm WWDM devices for category C - Indoor controlled environment
• Effective Date: 06-Feb-2024

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fibre optic interconnecting devices and passive components performance standard - Part 084-2: Non connectorised single-mode 980/1550 nm WWDM devices for category C - Controlled environment (IEC 61753-084-2:2007)HQRURGQLPLNorme de qualité de fonctionnement des dispositifs d'interconnexion et composants passifs à fibres optiques - Partie 084-2: Dispositifs WWDM 980/1550 nm unimodaux non connectorisés pour catégorie C - Environnement contrôlé (CEI 61753-084-2:2007)Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 084-2: Nicht mit Steckern versehene Einmoden-980/1550 nm-WWDM-Bauteile für die Kategorie C - Kontrollierte Umgebung (IEC 61753-084-2:2007)Ta slovenski standard je istoveten z:EN 61753-084-2:2008SIST EN 61753-084-2:2008en,fr,de33.180.20ICS:SLOVENSKI
STANDARDSIST EN 61753-084-2:200801-april-2008

EUROPEAN STANDARD EN 61753-084-2 NORME EUROPÉENNE
EUROPÄISCHE NORM February 2008
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2008 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61753-084-2:2008 E
ICS 33.180.20
English version
Fibre optic interconnecting devices and
passive components performance standard -
Part 084-2: Non connectorised single-mode 980/1550 nm
WWDM devices for category C -
Controlled environment (IEC 61753-084-2:2007)
Norme de qualité de fonctionnement
des dispositifs d'interconnexion
et composants passifs à fibres optiques - Partie 084-2: Dispositifs WWDM
980/1550 nm unimodaux
non connectorisés pour catégorie C -
Environnement contrôlé (CEI 61753-084-2:2007)
Lichtwellenleiter -
Verbindungselemente
und passive Bauteile -
Betriebsverhalten -
Teil 084-2: Nicht mit Steckern versehene Einmoden-980/1550 nm-WWDM-Bauteile für die Kategorie C -
Kontrollierte Umgebung
(IEC 61753-084-2:2007)
This European Standard was approved by CENELEC on 2008-02-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.

Foreword The text of document 86B/2448/FDIS, future edition 1 of IEC 61753-084-2, prepared by SC 86B, Fibre optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61753-084-2 on 2008-02-01. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2008-11-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2011-02-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 61753-084-2:2007 was approved by CENELEC as a European Standard without any modification. __________

- 3 - EN 61753-084-2:2008 Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60793-2-50 -1) Optical fibres -
Part 2-50: Product specifications - Sectional specification for class B single-mode fibres EN 60793-2-50 + corr. July
20042)2004
IEC 61300-2-1
-1) Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -
Part 2-1: Tests - Vibration (sinusoidal) EN 61300-2-1 20032)
IEC 61300-2-4 -1) Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -
Part 2-4: Tests - Fibre/cable retention EN 61300-2-4 19972)
IEC 61300-2-5 -1) Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -
Part 2-5: Tests - Torsion/twist EN 61300-2-5 20022)
IEC 61300-2-9 -1) Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -
Part 2-9: Tests - Shock EN 61300-2-9 19972)
IEC 61300-2-14 -1) Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -
Part 2-14: Tests - Optical power handling and damage threshold characterization EN 61300-2-14 + corr. November
20062)2006
IEC 61300-2-17 -1) Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -
Part 2-17: Tests - Cold EN 61300-2-17 20032)
IEC 61300-2-18 -1) Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -
Part 2-18: Tests - Dry heat - High temperature endurance EN 61300-2-18 20052)
1) Undated reference. 2) Valid edition at date of issue.

Publication Year Title EN/HD Year IEC 61300-2-19 -1) Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -
Part 2-19: Tests - Damp heat (steady state) EN 61300-2-19 20052)
IEC 61300-2-22 -1) Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -
Part 2-22: Tests - Change of temperature EN 61300-2-22 20072)
IEC 61300-2-42 -1) Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -
Part 2-42: Tests - Static side load for connectors EN 61300-2-42 20052)
IEC 61300-3-2 -1) Fibre optic interconnecting devices and passive components - Basic tests and measurement procedures -
Part 3-2: Examinations and measurements - Polarization dependence of attenuation in a single-mode fibre optic device EN 61300-3-2 19992)
IEC 61300-3-6 -1) Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -
Part 3-6: Examinations and measurements - Return loss EN 61300-3-6 20032)
IEC 61300-3-7 -1) Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -
Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss EN 61300-3-7 20012)
IEC 61300-3-20 -1) Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -
Part 3-20: Examinations and measurements - Directivity of fibre optic branching devices EN 61300-3-20 + corr. March
20012)2002
IEC 61753-1 -1) Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards EN 61753-1 20072)

NORME INTERNATIONALECEIIEC INTERNATIONAL STANDARD 61753-084-2Première éditionFirst edition2007-03 Norme de qualité de fonctionnement des dispositifs d’interconnexion et composants passifs à fibres optiques – Partie 084-2: Dispositifs WWDM 980/1550 nm unimodaux
non connectorisés pour catégorie C – Environnement contrôlé
Fibre optic interconnecting devices and passive components performance standard – Part 084-2: Non connectorised single-mode 980/1550 nm WWDM devices for category C – Controlled environment Pour prix, voir catalogue en vigueur For price, see current catalogue© IEC 2007
Droits de reproduction réservés
⎯
Copyright - all rights reserved Aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l'éditeur. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission,
3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, SwitzerlandTelephone: [phone] Telefax: [phone] E-mail: [e-mail]
Web: www.iec.ch CODE PRIX PRICE CODE L Commission Electrotechnique InternationaleInternational Electrotechnical Commission

61753-084-2 © IEC:2007 – 3 –
CONTENTS FOREWORD.5
1 Scope.9 2 Normative references.9 3 Definitions.11 4 Abbreviated terms.11 5 Test procedure.13 6 Test report.13 7 Performance requirements.13
Annex A (normative)
Sample size and grouping requirements.21
Table 1 – Test details and requirements.13 Table A.1 – Number of samples for each test.21

61753-084-2 © IEC:2007 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION ___________
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD –
Part 084-2: Non connectorised single-mode 980/1550 nm
WWDM devices for category C –
Controlled environment
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61753-084-2 has been prepared by subcommittee 86B: Fibre optic interconnecting devices and passive components, of IEC technical committee 86: Fibre optics. The text of this standard is based on the following documents: FDIS Report on voting 86B/2448/FDIS 86B/2494/RVD
Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table.

61753-084-2 © IEC:2007 – 7 –
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 61753 series, published under the general title Fibre optic interconnecting devices and passive components performance standard, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to the specific publication. At this date, the publi
...