EN IEC 60335-2-119:2024/A11:2024
(Amendment)Household and similar electrical appliances - Safety - Part 2-119: Particular requirements for commercial vacuum packaging appliances
Household and similar electrical appliances - Safety - Part 2-119: Particular requirements for commercial vacuum packaging appliances
This European Standard deals with the safety of commercial electric packaging appliances using vacuum conditions for food preservation, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-119: Besondere Anforderungen für Vakuumverpackungsgeräte für den gewerblichen Gebrauch
Appareils électrodomestiques et analogues - Sécurité - Partie 2-119: Exigences particulières pour les emballeuses sous vide à usage commercial
Gospodinjski in podobni električni aparati - Varnost - 2-119. del: Posebne zahteve za komercialne vakumske pakirne naprave - Dopolnilo A11
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2024
Gospodinjski in podobni električni aparati - Varnost - 2-119. del: Posebne zahteve
za komercialne vakumske pakirne naprave - Dopolnilo A11
Household and similar electrical appliances - Safety - Part 2-119: Particular requirements
for commercial vacuum packaging appliances
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke – Teil 2-119:
Besondere Anforderungen für Vakuumverpackungsgeräte für den gewerblichen
Gebrauch
Appareils électrodomestiques et analogues - Sécurité - Partie 2-119: Exigences
particulières pour les emballeuses sous vide à usage commercial
Ta slovenski standard je istoveten z: EN IEC 60335-2-119:2024/A11:2024
ICS:
13.120 Varnost na domu Domestic safety
97.030 Električni aparati za dom na Domestic electrical
splošno appliances in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 60335-2-119:2024/A11
NORME EUROPÉENNE
EUROPÄISCHE NORM February 2024
ICS 97.030; 13.120
English Version
Household and similar electrical appliances - Safety - Part 2-119:
Particular requirements for commercial vacuum packaging
appliances
Appareils électrodomestiques et analogues - Sécurité - Sicherheit elektrischer Geräte für den Hausgebrauch und
Partie 2-119: Exigences particulières pour les emballeuses ähnliche Zwecke - Teil 2-119: Besondere Anforderungen für
sous vide à usage commercial Vakuumverpackungsgeräte für den gewerblichen Gebrauch
This amendment A11 modifies the European Standard EN IEC 60335-2-119:2024; it was approved by CENELEC on 2023-12-07.
CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
amendment the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60335-2-119:2024/A11:2024 E
Contents Page
European foreword . 3
1 Modification to Introduction . 4
2 Modification to Clause 1, “Scope” . 4
3 Modification to Clause 2, “Normative references” . 4
4 Modification to Clause 3, “Terms and definitions” . 5
5 Modification to Clause 4, “General requirement” . 5
6 Modification to Clause 7, “Marking and instructions” . 5
7 Modification to Clause 19, “Abnormal operation” . 7
8 Modification to Clause 20, “Stability and mechanical hazards” . 7
9 Modification to Clause 21, “Mechanical strength” . 8
10 Modification to Clause 22, “Construction” . 8
11 Modification to annexes. 11
12 Modification to Bibliography . 20
European foreword
This document (EN IEC 60335-2-119:2024/A11:2024) has been prepared by CLC/TC 61 “Safety of
household and similar electrical appliances”.
The following dates are fixed:
• latest date by which this document has to be (dop) 2024-12-07
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) 2026-12-07
conflicting with this document have to be
withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document is read in conjunction with EN IEC 60335-2-119:2024.
The numbering system for European clauses, subclauses, notes, tables, figures and annexes that are
additional to those in the IEC standard are prefixed with the letter “Z”.
This document has been prepared under a standardization request addressed to CENELEC by the
European Commission. The Standing Committee of the EFTA States subsequently approves these
requests for its Member States.
For the relationship with EU Legislation, see informative Annex ZZB, which is an integral part of this
document.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
1 Modification to Introduction
Addition:
This European Amendment A11 supplements or modifies the corresponding clauses of the standards
below:
— EN IEC 60335-1:2023+A11:2023 (Part 1)
— EN IEC 60335-2-119:2024 (Part 2)
2 Modification to Clause 1, “Scope”
Replace the seventh paragraph starting with “As far as is practicable…” up to ” …children playing
with the appliance” by the following:
This document deals with the reasonably foreseeable hazards presented by appliances that are
encountered by all persons in and around the installation place. However, in general, it does not take into
account:
— children playing with the appliance;
— the use of the appliance by children;
It is recognized that very vulnerable people can have needs beyond the level addressed in this
document.
Add the following:
This annex deals with additional requirements concerning appliances and machines with power driven
parts, intended to be used by experts or trained users for example in restaurants, canteens, hospitals and
commercial enterprises such as bakeries, butcheries, pastries, fishmongiers, food laboratories, food
preparation departments in supermarkets etc. and appliances and machines with power driven parts
which are declared to be for commercial use by lay persons.
NOTE The statement from the manufacturer in the product information concerning the specific product is the
criterion that is expected to be considered to determine the intended use of the appliance. The statement is expected
to accurately reflect the reasonably foreseeable use of the product.
This document does not deal with any specific requirements on noise emitted from these appliances the
is
generated noise is not considered to be a relevant hazard. Thus, the emission sound pressure level LpA
≤ 70 dB(A).
considered to be LpA
3 Modification to Clause 2, “Normative references”
Add the following normative references:
EN 1672-2:2020, Food processing machinery - Basic concepts - Part 2: Hygiene and cleanability
requirements
EN 614-1:2006+A1:2009, Safety of machinery - Ergonomic design principles - Part 1: Terminology and
general principles
EN 614-2:2000+A1:2008, Safety of machinery - Ergonomic design principles - Part 2: Interactions
between the design of machinery and work tasks
4 Modification to Clause 3, “Terms and definitions”
Add the following term entries:
3.ZE1
guard
part of the appliance specifically designed to provide protection by means of a physical barrier.
3.ZE2
operator
person or persons installing, operating, adjusting, maintaining, cleaning, repairing or moving appliances
3.ZE3
workstation
place, as defined in the technical documentation of the relevant appliance, where the operator is
expected to be in attendance to operate, or to adjust, or to control the appliance
5 Modification to Clause 4, “General requirement”
Replace the first paragraph of Part 1 by:
Appliances shall be constructed so that they function safely so as to cause no danger to persons or
surroundings during normal use, even in the event of carelessness, and during installation, adjusting,
maintenance, cleaning, repairing or transportation.
6 Modification to Clause 7, “Marking and instructions”
7.1 Replace the fourth and fifth dashed items of Part 1 by:
— business name and full address of the manufacturer and, where applicable, their authorized
representative;
— model or type reference, serial number, if any, and production year;
NOTE Production year is the year when the production process is completed. The production year can be a part of
the serial number.
Add a new dashed item:
— designation of the appliance.
The designation may be a combination of letters and/or numbers and shall enable to identify the
machine as specified in the instructions.
7.12 Replace the first sentence of Part 1 in the requirement by:
Instructions shall be provided with the appliance so that the appliance can be used safely.
Replace the modification by the following
This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given supervision or instruction concerning use
of the appliance by a person responsible for their safety.
Addition:
If symbol 5021 or 5036 or 5140 of IEC 60417 (2002-10) or ISO 7000-0434A (2004-01) is marked on the
appliance, its meaning shall be explained.
The front cover of the instructions shall include the substance of the following:
CAUTION: Read the instructions before using the appliance
This wording may be replaced by symbols ISO 7000-0434A (2004-01) and ISO 7000-0790 (2004-01).
Add the following:
Instructions shall include:
— the business name and full address of the manufacturer and, where applicable, their authorized
representative;
— model or type reference of the appliance as marked on the appliance itself, except for the serial
number;
— the designation of the appliance together with its explanation in case it is given by a combination of
letters and/or numbers;
— the general description of the appliance, when needed due to the complexity of the appliance;
— specific precautions if required during installation, operation, adjusting, user maintenance, cleaning,
repairing or moving;
— when needed drawings, diagrams, descriptions and explanations necessary for the safe use and
user maintenance of the appliance;
— the possible reasonably foreseeable misuse and, whenever relevant, a warning against the effects it
may have on the safe use of the appliance;
— the intended use of the appliance as covered by the scope of this document;
— instructions regarding user maintenance and operation of the appliance and, if necessary,
instructions for the training of operators;
— instructions designed to enable adjustment and maintenance to be carried out safely, including the
protective measures that should be taken during these operations;
— the conditions under which the appliance is stable during use, dismantling when out of use, testing or
foreseeable breakdowns;
— the operating method to be followed in the event of accident or breakdown to prevent unsafe actions;
— information regarding the use of personal protection equipment in case of spreading hot food stuff;
— Warning concerning possible slippery floor adjacent to the appliance.
The words “Original instructions” shall appear on the language version(s) verified by the manufacturer or
by the authorized representative.
When a translation of the original instructions has been provided by a person introducing the appliance on
the market; the meaning of the sentence “Translation of the original instructions” shall appear in the
relevant instructions delivered with the appliance.
The instructions for maintenance/service to be done by specialized personnel, mandated by the
manufacturer or the authorized representative may be supplied in only one Community language which
the specialized personnel understand.
The instructions shall indicate the type and frequency of inspections and maintenance required for safe
operation including the preventive maintenance measures.
7.12.1 Replace the third paragraph starting with “For appliances marked with different rated
voltages …” by the following:
The instructions shall state that any repairs shall be carried out by competent persons.
Add a new subclause:
7.12.Z.101 Wherever needed for specific appliances, information shall be given:
— on use, transportation, a
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.