prEN IEC 60335-2-62:2025
(Main)Household and similar electrical appliances - Safety - Part 2-62: Particular requirements for commercial electric rinsing sinks
Household and similar electrical appliances - Safety - Part 2-62: Particular requirements for commercial electric rinsing sinks
This European standard deals with the safety of electrically operated commercial rinsing sinks used in commercial kitchens, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral, and 480 V for other appliances
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-62: Besondere Anforderungen für elektrische Spülbecken für den gewerblichen Gebrauch
Appareils électrodomestiques et analogues - Sécurité - Partie 2-62: Exigences particulières pour les plonges électriques à usage collectif
L'IEC 60335-2-62:2024 traite de la sécurité des plonges électriques à usage commercial, utilisées dans les cuisines commerciales et dont la tension assignée est inférieure ou égale à 250 V pour les appareils monophasés alimentés entre phase et neutre, et à 480 V pour les autres appareils. Ces appareils ne sont pas destinés à un usage domestique ou analogue. Ils sont utilisés dans des endroits fermés au public, par exemple les cuisines des restaurants, des cantines, des hôpitaux et des entreprises artisanales, telles que les boulangeries et les boucheries. La partie électrique des appareils utilisant d’autres formes d’énergie relève également du domaine d’application de la présente norme. Dans la mesure du possible, la présente norme traite des dangers courants que présentent ces types d'appareils. L’attention est attirée sur le fait que - Pour les appareils destinés à être utilisés dans des véhicules ou à bord de navires ou d'avions, des exigences supplémentaires peuvent être nécessaires. - Pour les appareils destinés à être utilisés dans les pays tropicaux, des exigences spéciales peuvent être nécessaires. - Dans de nombreux pays, des exigences supplémentaires sont spécifiées par les organismes nationaux de la santé, par les organismes nationaux responsables de la protection des travailleurs, par les organismes nationaux responsables de l'alimentation en eau et par des organismes similaires. La présente norme ne s'applique pas - Aux appareils destinés principalement à la stérilisation conforme aux normes cliniques. - Aux lave-vaisselle (IEC 60335-2-58). - Aux appareils prévus exclusivement pour des usages industriels. - Aux appareils destinés à être utilisés dans des locaux qui présentent des conditions particulières, telles que la présence d’une atmosphère corrosive ou explosive (poussière, vapeur ou gaz). Cette cinquième édition annule et remplace la quatrième édition parue en 2019. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) texte aligné sur l'IEC 60335-1:2020; b) suppression ou transformation de certaines notes en texte normatif (Article 1 et paragraphes 7.15, 11.7, 22.103, 27.2); c) précisions relatives au fait que les plonges électriques à usage commercial ne sont pas destinées aux endroits ouverts au public (Article 1); d) alignement de certaines exigences sur les normes relatives aux appareils de restauration commerciale (Article 1 et paragraphes 5.101, 11.4, 11.7, 15.1.1, 22.101, 22.102, 22.103, 23.3, 25.3, 27.2). La présente partie 2 doit être utilisée conjointement avec la dernière édition de l'IEC 60335-1 et ses amendements sauf si cette édition l'exclut; dans ce cas, la dernière édition qui n'exclut pas la présente partie 2 est utilisée. Elle a été établie sur la base de la sixième édition (2020) de cette norme.
Gospodinjski in podobni električni aparati - Varnost - 2-62. del: Posebne zahteve za komercialna električna pomivalna korita
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2026
Gospodinjski in podobni električni aparati - Varnost - 2-62. del: Posebne zahteve
za komercialna električna pomivalna korita
Household and similar electrical appliances - Safety - Part 2-62: Particular requirements
for commercial electric rinsing sinks
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-62:
Besondere Anforderungen für elektrische Spülbecken für den gewerblichen Gebrauch
Appareils électrodomestiques et analogues - Sécurité - Partie 2-62: Exigences
particulières pour les plonges électriques à usage collectif
Ta slovenski standard je istoveten z: prEN IEC 60335-2-62:2025
ICS:
91.140.70 Sanitarne naprave Sanitary installations
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD DRAFT
prEN IEC 60335-2-62
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2025
ICS 97.040.50 Will supersede EN IEC 60335-2-62:2022
English Version
Household and similar electrical appliances - Safety - Part 2-62:
Particular requirements for commercial electric rinsing sinks
(IEC 60335-2-62:2024)
Appareils électrodomestiques et analogues - Sécurité - Sicherheit elektrischer Geräte für den Hausgebrauch und
Partie 2-62: Exigences particulières pour les plonges ähnliche Zwecke - Teil 2-62: Besondere Anforderungen für
électriques à usage collectif elektrische Spülbecken für den gewerblichen Gebrauch
(IEC 60335-2-62:2024) (IEC 60335-2-62:2024)
This draft European Standard is submitted to CENELEC members for enquiry.
Deadline for CENELEC: 2026-02-20.
The text of this draft consists of the text of IEC 60335-2-62:2024.
If this draft becomes a European Standard, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 81623 Ref. No. prEN IEC 60335-2-62:2025 E
European foreword
This document (prEN IEC 60335-2-62:2025) consists of the text of IEC 60335-2-62:2024, prepared by
IEC/TC 61 "Safety of household and similar electrical appliances"
This document is currently submitted to the Enquiry.
The following dates are proposed:
• latest date by which the existence of this (doa) dav + 6 months
document has to be announced at national
level
• latest date by which this document has to be (dop) dav + 12 months
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) dav + 36 months
conflicting with this document have to be (to be confirmed or
withdrawn
modified when voting)
This document will supersede EN IEC 60335-2-62:2022 and all of its amendments and corrigenda (if
any).
This document is read in conjunction with prEN IEC 60335-2-62:2025/prAA:2025 and EN IEC 60335-1.
IEC 60335-2-62 ®
Edition 5.0 2024-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Household and similar electrical appliances – Safety –
Part 2-62: Particular requirements for commercial electric rinsing sinks
Appareils électrodomestiques et analogues – Sécurité –
Partie 2-62: Exigences particulières pour les plonges électriques à usage
collectif
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 97.040.50 ISBN 978-2-8322-9593-9
– 2 – IEC 60335-2-62:2024 © IEC 2024
CONTENTS
FOREWORD . 4
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 8
3 Terms and definitions . 9
4 General requirement . 10
5 General conditions for the tests . 10
6 Classification . 10
7 Marking and instructions . 11
8 Protection against access to live parts . 12
9 Starting of motor-operated appliances . 12
10 Power input and current . 12
11 Heating . 13
12 Charging of metal-ion batteries . 14
13 Leakage current and electric strength at operating temperature . 15
14 Transient overvoltages . 15
15 Moisture resistance . 15
16 Leakage current and electric strength . 16
17 Overload protection of transformers and associated circuits . 17
18 Endurance . 17
19 Abnormal operation . 17
20 Stability and mechanical hazards . 17
21 Mechanical strength . 17
22 Construction . 17
23 Internal wiring . 19
24 Components . 19
25 Supply connection and external flexible cords . 19
26 Terminals for external conductors . 20
27 Provision for earthing . 20
28 Screws and connections . 20
29 Clearances, creepage distances and solid insulation . 21
30 Resistance to heat and fire . 21
31 Resistance to rusting . 21
32 Radiation, toxicity and similar hazards . 22
Annexes . 24
Annex P (informative) Guidance for the application of this standard to appliances used
in tropical climates . 25
Bibliography . 26
Figure 101 – Probe for measuring surface temperatures . 22
Figure 102 – Splash apparatus . 23
IEC 60335-2-62:2024 © IEC 2024 – 3 –
Table 101 – Maximum temperature rises for specified external accessible surfaces
under normal operating conditions . 14
Table 102 – Assembling torques for screwed connections providing earthing continuity . 21
– 4 – IEC 60335-2-62:2024 © IEC 2024
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-62: Particular requirements
for commercial electric rinsing sinks
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) IEC draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). IEC takes no position concerning the evidence, validity or applicability of any claimed patent rights in
respect thereof. As of the date of publication of this document, IEC had not received notice of (a) patent(s), which
may be required to implement this document. However, implementers are cautioned that this may not represent
the latest information, which may be obtained from the patent database available at https://patents.iec.ch. IEC
shall not be held responsible for identifying any or all such patent rights.
IEC 60335-2-62 has been prepared by IEC technical committee 61: Safety of household and
similar electrical appliances. It is an International Standard.
This fifth edition cancels and replaces the fourth edition published in 2019. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) alignment with IEC 60335-1:2020;
b) deletion or conversion of some notes to normative text (Clause 1, 7.15, 11.7, 22.103, 27.2);
IEC 60335-2-62:2024 © IEC 2024 – 5 –
c) clarification that commercial electric rinsing sinks are not intended to be used in areas open
to the public (Clause 1);
d) alignment of some requirements with the standards for commercial catering appliances
(Clause 1, 5.101, 11.4, 11.7, 15.1.1, 22.101, 22.102, 22.103, 23.3, 25.3, 27.2).
The text of this International Standard is based on the following documents:
Draft Report on voting
61/7269/FDIS 61/7292/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/publications.
A list of all parts of the IEC 60335 series, under the general title: Household and similar
electrical appliances – Safety, can be found on the IEC website.
This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its
amendments unless that edition precludes it; in that case, the latest edition that does not
preclude it is used. It was established on the basis of the sixth edition (2020) of that standard.
NOTE 1 When "Part 1" is mentioned in this standard, it refers to IEC 60335-1.
This part 2 supplements or modifies the corresponding clauses in IEC 60335-1, so as to convert
that publication into the IEC standard: Particular requirements for commercial electric rinsing
sinks.
When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as
far as is reasonable. When this standard states "addition", "modification" or "replacement", the
relevant text in Part 1 is to be adapted accordingly.
NOTE 2 The following numbering system is used:
– subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1;
– unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including
those in a replaced clause or subclause;
– additional annexes are lettered AA, BB, etc.
NOTE 3 The following print types are used:
– requirements: in roman type;
– test specifications: in italic type;
– notes: in small roman type.
Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the
associated noun are also in bold.
– 6 – IEC 60335-2-62:2024 © IEC 2024
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn, or
• revised.
NOTE 4 The attention of National Committees is drawn to the fact that equipment manufacturers and testing
organizations can need a transitional period following publication of a new, amended or revised IEC publication in
which to make products in accordance with the new requirements and to equip themselves for conducting new or
revised tests.
It is the recommendation of the committee that the content of this publication be adopted for implementation nationally
not earlier than 12 months from the date of publication.
IEC 60335-2-62:2024 © IEC 2024 – 7 –
INTRODUCTION
It has been assumed in the drafting of this International Standard that the execution of its
provisions is entrusted to appropriately qualified and experienced persons.
Guidance documents concerning the application of the safety requirements for appliances can
be accessed via TC 61 supporting documents on the IEC website
https://www.iec.ch/tc61/supportingdocuments
This information is given for the convenience of users of this International Standard and does
not constitute a replacement for the normative text in this standard.
This standard recognizes the internationally accepted level of protection against hazards such
as electrical, mechanical, thermal, fire and radiation of appliances when operated as in normal
use taking into account the manufacturer's instructions. It also covers abnormal situations that
can be expected in practice and takes into account the way in which electromagnetic
phenomena can affect the safe operation of appliances.
This standard takes into account the requirements of IEC 60364 as far as possible so that there
is compatibility with the wiring rules when the appliance is connected to the supply mains.
However, national wiring rules can differ.
If an appliance within the scope of this standard also incorporates functions that are covered
by another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, as
far as is reasonable. If applicable, the influence of one function on the other is taken into
account.
When a part 2 standard does not include additional requirements to cover hazards dealt with in
Part 1, Part 1 applies.
NOTE 1 This means that the technical committees responsible for the part 2 standards have determined that it is
not necessary to specify particular requirements for the appliance in question over and above the general
requirements.
This standard is a product family standard dealing with the safety of appliances and takes
precedence over horizontal and generic standards covering the same subject.
NOTE 2 Horizontal publications, basic safety publications and group safety publications covering a hazard are not
applicable since they have been taken into consideration when developing the general and particular requirements
for the IEC 60335 series of standards.
An appliance that complies with the text of this standard will not necessarily be considered to
comply with the safety principles of the standard if, when examined and tested, it is found to
have other features that impair the level of safety covered by these requirements.
An appliance employing materials or having forms of construction differing from those detailed
in the requirements of this standard may be examined and tested according to the intent of the
requirements and, if found to be substantially equivalent, may be considered to comply with the
standard.
NOTE 3 Standards dealing with non-safety aspects of household appliances are:
– IEC standards published by TC 59 concerning methods of measuring performance;
– CISPR 11, CISPR 14-1 and relevant IEC 61000-3 series standards concerning electromagnetic emissions;
– CISPR 14-2 concerning electromagnetic immunity;
– IEC standards published by TC 111 concerning environmental matters.
– 8 – IEC 60335-2-62:2024 © IEC 2024
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-62: Particular requirements
for commercial electric rinsing sinks
1 Scope
This clause of Part 1 is replaced by the following.
This part of IEC 60335 deals with the safety of electrically operated commercial rinsing sinks
used in commercial kitchens, their rated voltage being not more than 250 V for single-phase
appliances connected between one phase and neutral, and 480 V for other appliances.
These appliances are not intended for household and similar purposes. They are used in areas
not open to the public, for example in kitchens of restaurants, canteens, hospitals and
commercial enterprises such as bakeries and butcheries.
The electrical part of appliances making use of other forms of energy is also within the scope
of this standard.
As far as is practicable, this standard deals with the common hazards presented by these types
of appliances.
Attention is drawn to the fact that
– for appliances intended to be used in vehicles or on board ships or aircraft, additional
requirements can be necessary;
– for appliances intended to be used in tropical countries, special requirements can be
necessary;
– in many countries, additional requirements are specified by the national health authorities,
the national authorities responsible for the protection of labour, the national water supply
authorities and similar authorities.
This standard does not apply to
– appliances designed primarily for sterilizing to clinical standards;
– dishwashers (IEC 60335-2-58);
– appliances designed exclusively for industrial purposes;
– appliances intended to be used in locations where special conditions prevail, such as the
presence of a corrosive or explosive atmosphere (dust, vapour or gas).
2 Normative references
This clause of Part 1 is applicable except as follows.
Addition:
IEC 60584-1, Thermocouples – Part 1: EMF specifications and tolerances
ISO 898-1, Mechanical properties of fasteners made of carbon steel and alloy steel – Part 1:
Bolts, screws and studs with specified property classes – Coarse thread and fine pitch thread
IEC 60335-2-62:2024 © IEC 2024 – 9 –
ISO 3506-1, Fasteners – Mechanical properties of corrosion-resistant stainless steel fasteners
– Part 1: Bolts, screws and studs with specified grades and property classes
ISO 3506-2, Fasteners – Mechanical properties of corrosion-resistant stainless steel fasteners
– Part 2: Nuts with specified grades and property classes
ISO 3506-3, Mechanical properties of corrosion-resistant stainless steel fasteners – Part 3: Set
screws and similar fasteners not under tensile stress
ISO 3506-4, Mechanical properties of corrosion-resistant stainless steel fasteners – Part 4:
Tapping screws
3 Terms and definitions
This clause of Part 1 is applicable except as follows.
3.1 Definitions relating to physical characteristics
3.1.4 Addition:
Note 101 to entry: The rated power input is the sum of the power inputs of all the individual elements in the
appliance that can be on at one time; where there are several such combinations possible, that giving the highest
power input is used in determining the rated power input.
3.1.9 Modification:
normal operation
Replace the first paragraph with the following:
operation of the appliance under the following conditions:
Appliances are operated in accordance with the instructions, with all the controls intended to
be operated by the user adjusted to their maximum setting. Lids and covers, if any, are placed
in their intended position.
Appliances intended to be filled by hand or by a manually operated tap are filled to the indicated
level.
Where several levels are marked, that giving the most unfavourable conditions is used.
Appliances intended to be filled automatically are connected to a water supply having the
pressure designated by the manufacturer.
Where the manufacturer specifies a range of pressures, the pressure is adjusted to that giving
the most unfavourable conditions.
The temperature of the water supplied is 15 °C ± 5 °C.
Motors incorporated in the appliance are operated in the intended manner, under the most
unfavourable conditions that can be expected in normal use taking into account the instructions.
3.5 Definitions relating to types of appliances
3.5.101
rinsing sink
appliance intended for rinsing crockery, cutlery chopsticks and utensils with water heated in the
appliance itself
– 10 – IEC 60335-2-62:2024 © IEC 2024
3.8 Definitions relating to miscellaneous matters
3.8.101
indicated level
mark on the appliance to indicate the maximum liquid level for correct operation
3.8.102
installation wall
special fixed construction containing supply facilities for appliances installed in conjunction
with it
4 General requirement
This clause of Part 1 is applicable.
5 General conditions for the tests
This clause of Part 1 is applicable except as follows.
5.10 Addition:
Appliances intended for installation in a bank of other appliances and appliances intended
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...