EN 60534-5:2004
(Main)Industrial-process control valves - Part 5: Marking
Industrial-process control valves - Part 5: Marking
specifies mandatory and supplementary markings of control valves. Some mandatory markings may be inappropriate for some valves of special design, and some supplementary markings may be appropriate only to specific types of control valves. It is recommended that the marking of all valves conform to this standard whenever possible unless otherwise agreed between the manufacturer and purchaser.
Stellventile für die Prozessregelung - Teil 5: Kennzeichnung
Vannes de régulation des processus industriels - Partie 5: Marquage
spécifie les marquages obligatoires et supplémentaires des vannes de régulation. Certains marquages obligatoires peuvent ne pas convenir à des vannes de certains types ou de conception spéciale, et quelques marquages supplémentaires peuvent seulement convenir à des types spécifiques de vannes de régulation. Il est recommandé, dans la mesure du possible, que les marquages pour toutes les vannes soient conformes à la présente norme à moins d'un accord entre le fabricant et l'acheteur.
Industrial-process control valves - Part 5: Marking
General Information
Standards Content (Sample)
SLOVENSKI SIST EN 60534-5:2004
STANDARD
junij 2004
Industrial-process control valves - Part 5: Marking
ICS 23.060.40; 25.040.40 Referenčna številka
SIST EN 60534-5:2004(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 60534-5
NORME EUROPÉENNE
EUROPÄISCHE NORM March 2004
ICS 23.060.40; 25.040.40
English version
Industrial-process control valves
Part 5: Marking
(IEC 60534-5:2004)
Vannes de régulation des processus Stellventile für die Prozessregelung
industriels Teil 5: Kennzeichnung
Partie 5: Marquage (IEC 60534-5:2004)
(CEI 60534-5:2004)
This European Standard was approved by CENELEC on 2004-03-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60534-5:2004 E
---------------------- Page: 2 ----------------------
EN 60534-5:2004 - 2 -
Foreword
The text of document 65B/514/FDIS, future edition 2 of IEC 60534-5, prepared by SC 65B, Devices, of
IEC TC 65, Industrial-process measurement and control, was submitted to the IEC-CENELEC parallel
vote and was approved by CENELEC as EN 60534-5 on 2004-03-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-12-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-03-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60534-5:2004 was approved by CENELEC as a European
Standard without any modification.
__________
---------------------- Page: 3 ----------------------
- 3 - EN 60534-5:2004
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1)
- - Industrial valves - Marking of metallic EN 19 -
valves
- - Flanges and their joints - Circular EN 1092 Series
flanges for pipes, valves, fittings and
accessories, PN designated
1)
- - Pipework components - Definition and EN 1333 -
selection of PN
IEC 60534-1 1987 Industrial-process control valves EN 60534-1 1993
Part 1: Control valve terminology and
general considerations
ISO 5209 1977 General purpose industrial valves - - -
Marking
ISO 7005 Series Metallic flanges - -
1)
Undated reference.
---------------------- Page: 4 ----------------------
NORME CEI
INTERNATIONALE IEC
60534-5
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2004-02
Vannes de régulation des processus industriels –
Partie 5:
Marquage
Industrial-process control valves –
Part 5:
Marking
© IEC 2004 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
y compris la photocopie et les photocopying and microfilm, without permiss
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.