EN 50132-1:2010
(Main)Alarm systems - CCTV surveillance systems for use in security applications - Part 1: System requirements
Alarm systems - CCTV surveillance systems for use in security applications - Part 1: System requirements
This European Standard specifies the minimum requirements for CCTV Surveillance Systems installed for security applications. This European Standard specifies the minimum performance requirements and functional requirements to be agreed on between customer and supplier in the operational requirement, but does not include requirements for design, planning, installation, testing, operation or maintenance (see Application Guidelines in EN 50132-7:1996). This European Standard excludes installation of remotely monitored detector activated CCTV systems. This European Standard also applies to CCTV Systems sharing means of detection, triggering, interconnection, control, communication and power supplies with other applications. The operation of a CCTV System shall not be adversely influenced by other applications. Requirements are specified for CCTV components where the relevant environment is classified. This classification describes the environment in which the CCTV component may be expected to operate as designed. When the requirements of the four environmental classes are inadequate, due to the extreme conditions experienced in certain geographic locations, special national conditions may be applied.
Alarmanlagen - CCTV-Überwachungsanlagen für Sicherungsanwendungen - Teil 1: Systemanforderungen
Systèmes d’alarme - Systèmes de surveillance CCTV à usage dans les applications de sécurité - Partie 1: Exigences système
Alarmni sistemi - Nadzorni sistemi CCTV za uporabo v aplikacijah varovanja - 1. del: Sistemske zahteve
Ta evropski standard določa minimalne zahteve za nadzorne sisteme CCTV, nameščene za aplikacije varovanja. Ta evropski standard določa minimalne zahteve za zmogljivost in funkcionalne zahteve, o katerih se dogovorita stranka in dobavitelj v zahtevi o delovanju, vendar ne vključuje zahtev za zasnovo, načrtovanje, namestitev, preskušanje, postopek ali vzdrževanje (glej Smernice za uporabo v EN 50132-7:1996). Ta evropski standard izključuje namestitev na daljavo nadzorovanih sistemov CCTV, aktiviranih z detektorjem. Ta evropski standard prav tako velja za sisteme CCTV, ki si delijo sredstva zaznavanja, sproženja, medsebojnega povezovanja, nadzora, komunikacije in napajalnike z drugimi aplikacijami. Na delovanje sistema CCTV ne smejo škodljivo vplivati druge aplikacije. Zahteve za komponente CCTV so opredeljene, kjer je klasificirano ustrezno okolje. Ta klasifikacija opisuje okolje, v katerem se za komponente CCTV lahko pričakuje, da bodo delovale tako, kot so zasnovane. Kadar so zahteve štirih okoljskih razredov nazadostne zaradi izrednih pogojev, prisotnih na določenih geografskih lokacijah, lahko veljajo posebni nacionalni pogoji.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2010
Alarmni sistemi - Nadzorni sistemi CCTV za uporabo v aplikacijah varovanja - 1.
del: Sistemske zahteve
Alarm systems - CCTV surveillance systems for use in security applications - Part 1:
System requirements
Alarmanlagen - CCTV-Überwachungsanlagen für Sicherungsanwendungen - Teil 1:
Systemanforderungen
Systèmes d’alarme - Systèmes de surveillance CCTV à usage dans les applications de
sécurité - Partie 1: Exigences système
Ta slovenski standard je istoveten z: EN 50132-1:2010
ICS:
13.320 Alarmni in opozorilni sistemi Alarm and warning systems
33.160.40 Video sistemi Video systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 50132-1
NORME EUROPÉENNE
March 2010
EUROPÄISCHE NORM
ICS 13.310;33.160.40
English version
Alarm systems -
CCTV surveillance systems for use in security applications -
Part 1: System requirements
Systèmes d’alarme - Alarmanlagen -
Systèmes de surveillance CCTV à usage CCTV-Überwachungsanlagen
dans les applications de sécurité - für Sicherungsanwendungen -
Partie 1: Exigences système Teil 1: Systemanforderungen
This European Standard was approved by CENELEC on 2010-03-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50132-1:2010 E
Foreword
This European Standard was prepared by the Technical Committee CENELEC TC 79, Alarm systems. It was
submitted to the formal vote and approved by CENELEC on 2010-03-01.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop) 2011-03-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow) 2013-03-01
EN 50132 will consist of the following parts, under the general title Alarm systems – CCTV surveillance
systems for use in security applications:
Part 1: System requirements;
Part 5: Video transmission;
Part 7: Application guidelines.
____________
– 3 – EN 50132-1:2010
Contents
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Definitions and abbreviations . 7
3.1 Def initions . 7
3.2 Abbreviations . 20
4 Functional description of the CCTV system (informative) . 21
4.1 CCTV system . 21
4.2 Video environment . 22
4.3 System management . 24
4.4 System security . 27
5 Security grading . 27
6 Functional requirements . 28
6.1 Video environment . 29
6.2 System management . 32
6.3 System security . 34
6.4 Environmental requirements . 39
7 Environmental classes . 39
7.1 Generalities . 39
7.2 Environmental Class I – Indoor. 39
7.3 Environmental Class II – Indoor – General . 39
7.4 Environmental Class III – Outdoor – Sheltered . 40
7.5 Environmental Class IV – Outdoor – General . 40
8 Documentation . 40
8.1 System documentation . 40
8.2 Instructions relating to operation . 40
8.3 System component documentation . 40
Annex A (normative) Special national conditions . 41
Bibliography . 42
Figures
Figure 1 – CCTV system . 22
Figure 2 – Example for CCTV system . 23
Figure 3 – Activity management . 26
Figure 4 – Risk and security grades . 28
Tables
Table 1 – Storage . 30
Table 2 – Archiving and backup . 31
Table 3 – System logs . 33
Table 4 – Monitoring of interconnections. 35
Table 5 – Tamper detection . 35
Table 6 – Level of access . 36
Table 7 – Authorisation code requirements . 37
Table 8 – Data access . 37
Table 9 – Access to system logs . 37
Table 10 – Access to system set-up . 38
Table 11 – Data labelling . 38
– 5 – EN 50132-1:2010
Introduction
This European Standard applies to CCTV Systems for surveillance of private and public areas. It includes
four security grades and four environmental classes.
This European Standard is intended to assist CCTV System companies, manufacturers, system integrators,
installer, consultants, owner, users, insurers and law enforcement in achieving a complete and accurate
specification of the surveillance system. This European Standard does not specify the type of technology or
the required image quality needed for a certain observation task.
Due to the wide range of CCTV system applications like security, safety, public safety etc. only the minimum
requirements are covered in this European Standard.
For achieving an optimal surveillance system in terms of design, planning, operation, installation and
maintenance, follow the Application Guidelines of EN 50132-7:1996. The specified operational requirements
(Clause 5) should enable the above mentioned stakeholders to choose the functions that are important for
their application with due consideration to the risk.
Special National standards apply as well.
This European Standard is not intended to be used for testing individual CCTV components.
1 Scope
This European Standard specifies the minimum requirements for CCTV Surveillance Systems installed for
security applications. This European Standard specifies the minimum performance requirements and
functional requirements to be agreed on between customer and supplier in the operational requirement, but
does not include requirements for design, planning, installation, testing, operation or maintenance (see
Application Guidelines in EN 50132-7:1996). This European Standard excludes installation of remotely
monitored detector activated CCTV systems.
This European Standard also applies to CCTV Systems sharing means of detection, triggering,
interconnection, control, communication and power supplies with other applications. The operation of a
CCTV System shall not be adversely influenced by other applications.
Requirements are specified for CCTV components where the relevant environment is classified. This
classification describes the environment in which the CCTV component may be expected to operate as
designed. When the requirements of the four environmental classes are inadequate, due to the extreme
conditions experienced in certain geographic locations, special national conditions may be applied.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
CLC/TS 50398 Alarm systems – Combined and integrated alarm systems – General requirements
EN 50130-4 Alarm systems – Part 4: Electromagnetic compatibility – Product family standard:
Immunity requirements for components of fire, intruder and social alarm systems
EN 50130-5 Alarm systems – Part 5: Environmental test methods
EN 50132-7:1996 Alarm systems – CCTV surveillance systems for use in security applications -
Part 7: Application guidelines
EN 60065 Audio, video and similar electronic apparatus – Safety requirements (IEC 60065)
EN 60950-1 Information technology equipment – Safety – Part 1: General requirements
(IEC 60950-1)
EN 61000-6-3 Electromagnetic compatibility (EMC) – Part 6-3: Generic standards – Emission
standard for residential, commercial and light-industrial environments
(IEC 61000-6-3)
– 7 – EN 50132-1:2010
3 Definitions and abbreviations
3.1 Definitions
For the purposes of this document, the following terms and definitions apply.
3.1.1
access levels
level of access to particular functions of the CCTV system, defining the user rights of the operator, to control
and configure the system as well as the access to data’s on the CCTV system
3.1.2
acknowledge
action of a user to accept a message or an indication
3.1.3
action
deliberate operation or act by the user which is part of alarm procedure
3.1.4
Advanced Streaming Format
proprietary digital audio/digital video container format, especially meant for streaming media
3.1.5
alarm
warning of the presence of any hazard to life, property or the environment
3.1.6
alarm condition
condition of an alarm system, or part thereof, whi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.