EN 61754-15:2009
(Main)Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 15: Type LSH connector family
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 15: Type LSH connector family
IEC 61754-15:2009(E) defines the standard interface dimensions for the type LSH family of connectors. The main changes with regard to the previous edition are to reconsider the figures and the dimensions of the interface.
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Steckgesichter von Lichtwellenleiter-Steckverbindern - Teil 15: Steckverbinderfamilie der Bauart LSH
Dispositifs d’interconnexion et composants passifs à fibres optiques - Interfaces de connecteurs pour fibres optiques - Partie 15: Famille de connecteurs de type LSH
La CEI 61754-15:2009 définit les dimensions d'interfaces normalisées pour la famille de connecteurs de type LSH. Les modifications principales par rapport à l'édition précédente concernent la reconsidération des figures et des dimensions de l'interface. Le contenu du corrigendum de janvier 2014 a été pris en considération dans cet exemplaire.
Optični spojni elementi in pasivne komponente - Vmesniki za optične konektorje - 15. del: Konektorska družina vrste LSH (IEC 61754-15:2009)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2009
1DGRPHãþD
SIST EN 61754-15:2002
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH9PHVQLNL]DRSWLþQHNRQHNWRUMH
GHO .RQHNWRUVNDGUXåLQDYUVWH/6+ ,(&
Fibre optic interconnecting devices and passive components - Fibre optic connector
interfaces - Part 15: Type LSH connector family (IEC 61754-15:2009)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Steckgesichter von
Lichtwellenleiter-Steckverbindern - Teil 15: Steckverbinderfamilie der Bauart LSH (IEC
61754-15:2009)
Dispositifs d’interconnexion et composants passifs à fibres optiques - Interfaces de
connecteurs pour fibres optiques - Partie 15: Famille de connecteurs de type LSH (CEI
61754-15:2009)
Ta slovenski standard je istoveten z: EN 61754-15:2009
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 61754-15
NORME EUROPÉENNE
September 2009
EUROPÄISCHE NORM
ICS 33.180.20 Supersedes EN 61754-15:2001 and CECC 86 275-801:1999
English version
Fibre optic interconnecting devices and passive components -
Fibre optic connector interfaces -
Part 15: Type LSH connector family
(IEC 61754-15:2009)
Dispositifs d’interconnexion Lichtwellenleiter -
et composants passifs à fibres optiques - Verbindungselemente
Interfaces de connecteurs und passive Bauteile -
pour fibres optiques - Steckgesichter
Partie 15: Famille de connecteurs von Lichtwellenleiter-Steckverbindern -
de type LSH Teil 15: Steckverbinderfamilie
(CEI 61754-15:2009) der Bauart LSH
(IEC 61754-15:2009)
This European Standard was approved by CENELEC on 2009-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61754-15:2009 E
Foreword
The text of document 86B/2835/FDIS, future edition 2 of IEC 61754-15, prepared by SC 86B, Fibre optic
interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61754-15 on 2009-07-01.
This European Standard supersedes EN 61754-15:2001 and CECC 86 275-801:1999.
The main changes with regard to EN 61754-15:2001 are to reconsider the figures and the dimensions of
the interface.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-07-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61754-15:2009 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 61754-15:2009
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 61755-3 Series Fibre optic connector optical interfaces - EN 61755-3 Series
(mod) Part 3: Optical interface
1)
ISO 8015 - Technical drawings - - -
Fundamental tolerancing principle
1)
Undated reference.
IEC 61754-15 ®
Edition 2.0 2009-06
INTERNATIONAL
STANDARD
Fibre optic interconnecting devices and passive components – Fibre optic
connector interfaces –
Part 15: Type LSH connector family
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
N
ICS 33.180.20 ISBN 2-8318-1046-8
– 2 – 61754-15 © IEC:2009(E)
CONTENTS
FOREWORD.3
1 Scope.5
2 Normative references .5
3 Description .5
4 Interfaces .5
Annex A (informative) Panel cutout .14
Figure 1 – Simplex plug interface.6
Figure 2 – APC/PC endface geometry.7
Figure 3 – Duplex plug interface .7
Figure 4 – Different types of adaptor interface with optional adaptor flanges.10
Figure 5 – Pin gauge for adaptor.12
Figure 6 – Active device interface .12
Figure A.1 – Simplex and duplex adaptor cutout .14
Table 1 – Intermateability between plugs, adaptors and active device.6
Table 2 – Dimensions of plug connector interface .8
Table 3 – Ferrule grade table for plug connector interface .9
Table 4 – Dimensions of the simplex and duplex adaptor interface .11
Table 5 – Gauge pin dimensions.12
Table 6 – Dimensions of active device interface.13
Table 7 – Grade table .13
Table A.1 – Dimensions of the simplex and duplex adaptor cutout .14
61754-15 © IEC:2009(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
FIBRE OPTIC CONNECTOR INTERFACES –
Part 15: Type LSH connector family
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61754-15 has been prepared by subcommittee 86B: Fibre optic
interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.
This second edition cancels and replaces the first edition published in 1999. The main
changes with regard to the previous edition are to reconsider the figures and the dimensions
of the interface.
The text of this standard is based on the following documents:
FDIS Report on voting
86B/2835/FDIS 86B/2876/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
– 4 – 61754-15 © IEC:2009(E)
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all the parts in the IEC 61754 series, under the general title Fibre optic
interconnecting devices and passive components – Fibre optic connector interfaces, can be
found on the IEC website.
Future standards in this series will carry the new general title as cited above. Titles of existing
standards in this series will be updated at the time of the next edition.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.
61754-15 © IEC:2009(E) – 5 –
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
FIBRE OPTIC CONNECTOR INTERFACES –
Part 15: Type LSH connector family
1 Scope
This part of IEC 61754 defines the standard interface dimensions for the type LSH family of
connectors.
2 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
IEC 61755-3 (all parts), Fibre optic connector optical interface – Part 3: Optical interface
ISO 8015, Technical drawings – Fundamental tolerancing principle
3 Description
The parent connector for the type LSH connector family is a single-position plug connector
which is characterized by a 2,5 mm nominal ferrule diameter. It includes a push-click-pull
coupling mechanism, which is spring-loaded relative to the ferrule in the direction of the
optical axis. The optical alignment mechanism of the connectors is a rigid bore sleeve or a
r
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.