EN 62343:2013
(Main)Dynamic modules - General and guidance
Dynamic modules - General and guidance
IEC 62343:2013(E) applies to all commercially available optical dynamic modules and devices. It describes the products covered by the IEC 62343-X series, defines terminology, fundamental considerations and basic approaches. The object of this standard is to: - establish uniform requirements for operation, reliability and environmental properties of DMs to be implemented in the appropriate DM standard, - provide assistance to the purchaser in the selection of consistently high-quality DM products for his particular applications, as well as in the consultation of the appropriate specific DM standard(s). This standard covers performance templates, performance standards, reliability qualification requirements, hardware and software interfaces and related testing methods. Keywords: optical dynamic modules and devices, DM
Dynamische Module - Allgemeines und Leitfaden
Modules dynamiques - Généralités et lignes directrices
IEC 62343:2013 s'applique à tous les dispositifs et modules dynamiques optiques disponibles dans le commerce. Elle décrit les produits couverts par la série IEC 62343-X, définit la terminologie, les considérations fondamentales et les approches de base. La présente norme a pour objets: - d'établir des exigences uniformes pour le fonctionnement, la fiabilité et les propriétés environnementales des modules dynamiques à intégrer dans la norme appropriée sur les modules dynamiques, - de fournir une assistance à l'acheteur dans le choix de produits à modules dynamiques de haute qualité dans le cadre de ses applications particulières, ainsi que dans la consultation des normes appropriées sur les modules dynamiques spécifiques. La présente norme couvre les modèles de performance, les normes de performance, les exigences sur la qualification de la fiabilité, les interfaces matérielles et logicielles et les méthodes d'essais associées. Mots clés: modules dynamiques optiques disponibles
Dinamični moduli in naprave - Splošno in navodilo
Ta mednarodni standard se uporablja za vse optične dinamične module in naprave, ki so na voljo na tržišču. Opisuje izdelke, vključene v IEC 62343-X, določa terminologijo, glavne dejavnike in osnovne pristope. Cilj tega standarda je – vzpostaviti enotne zahteve za delovanje, zanesljivost in okoljske lastnosti DM-jev za uvedbo v ustreznem standardu DM, – zagotoviti pomoč kupcu pri izbiri dosledno visokokakovostnih izdelkov DM za njegove določene uporabe in pri pregledu ustreznega specifičnega standarda DM. Ta standard vključuje predloge delovanja, standarde delovanja, kvalifikacijske zahteve glede zanesljivosti, vmesnike strojne in programske opreme ter povezane preskusne metode. Ker dinamični modul vključuje optični modul/napravo, tiskano vezje ter programsko/strojno opremo, bodo standardi, razviti v tej seriji, posnemali ustrezne obstoječe standarde. Ker pa je »dinamični modul« relativno nova kategorija izdelka, obstoječe prakse ne bodo zavezujoče za skupine standardov za dinamični modul, kjer se zahteve razlikujejo. Varnostni standardi, povezani z dinamičnimi moduli, obravnavajo zlasti optično moč, kar pokriva standard IEC TC 76: Varnost pri optičnem sevanju in laserska oprema.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62343:2013
01-oktober-2013
'LQDPLþQLPRGXOLLQQDSUDYH6SORãQRLQQDYRGLOR
Dynamic modules and devices - General and guidance
Dynamische Module und Bauteile - Allgemeines und Leitfaden
Dispositifs et modules dynamiques - Généralités et guide
Ta slovenski standard je istoveten z: EN 62343:2013
ICS:
33.180.01 6LVWHPL]RSWLþQLPLYODNQLQD Fibre optic systems in
VSORãQR general
SIST EN 62343:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62343:2013
---------------------- Page: 2 ----------------------
SIST EN 62343:2013
EUROPEAN STANDARD
EN 62343
NORME EUROPÉENNE
August 2013
EUROPÄISCHE NORM
ICS 33.180.01; 33.180.99
English version
Dynamic modules -
General and guidance
(IEC 62343:2013)
Modules dynamiques - Dynamische Module -
Généralités et lignes directrices Allgemeines und Leitfaden
(CEI 62343:2013) (IEC 62343:2013)
This European Standard was approved by CENELEC on 2013-07-10. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62343:2013 E
---------------------- Page: 3 ----------------------
SIST EN 62343:2013
EN 62343:2013 - 2 -
Foreword
The text of document 86C/1055/CDV, future edition 1 of IEC 62343, prepared by SC 86C "Fibre optic
systems and active devices" of IEC TC 86 "Fibre optics" was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN 62343:2013.
The following dates are fixed:
– latest date by which the document has to be implemented at (dop) 2014-04-10
national level by publication of an identical national
standard or by endorsement
– latest date by which the national standards conflicting with (dow) 2016-07-10
the document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62343:2013 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61290 NOTE Harmonised as EN 61290 (series).
IEC 61291 NOTE Harmonised as EN 61291 (series).
IEC 61300 NOTE Harmonised as EN 61300 (series).
IEC 61753 NOTE Harmonised as EN 61753 (series).
IEC 62342-2 NOTE Harmonised as EN 62342-2.
IEC 62343-3-1:2010 NOTE Harmonised as EN 62343-3-1:2010 (not modified).
IEC 62343-5 NOTE Harmonised as EN 62343-5 (series).
---------------------- Page: 4 ----------------------
SIST EN 62343:2013
- 3 - EN 62343:2013
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60050-731 - International Electrotechnical Vocabulary - -
(IEV) -
Chapter 731: Optical fibre communication
IEC/TR 61931 - Fibre optic - Terminology - -
IEC 62343-1 se
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.