Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V

Applicable to ceramic and glass hollow insulators intended for general use in electrical equipment and ceramic hollow insulators intended for use with a permanent gas pressure in switchgear and controlgear. These insulators are intended for indoor and outdoor use in electrical equipment, operating on alternating current with a rated voltage greater than 1 000 V and a frequency not greater than 100 Hz or for use in direct-current equipment with a rated voltage of greater than 1 500 V.

Druckbeanspruchte und drucklose Hohlisolatoren aus keramischem Werkstoff und Glas für Anwendungen in elektrischen Betriebsmitteln mit Nennspannungen über 1 000 V

Isolateurs creux avec ou sans pression interne, en matière céramique ou en verre, pour utilisation dans des appareillages prévus pour des tensions nominales supérieures à 1 000 V

S'applique aux isolateurs creux en céramique et en verre destinés à un usage général dans l'appareillage électrique et aux isolateurs creux en céramique utilisés sous pression permanente de gaz pour les disjoncteurs ou transformateurs de mesure. Ces isolateurs sont destinés à être utilisés à l'intérieur ou à l'extérieur pour des appareils électriques fonctionnant en courant alternatif avec une tension nominale supérieure à 1 000 V et une fréquence de 100 Hz au maximum, ou dans des appareils à courant continu avec une tension nominale supérieure à 1 500 V.

Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V (IEC 62155:2003, modified)

General Information

Status
Published
Publication Date
12-Aug-2003
Withdrawal Date
30-Apr-2006
Drafting Committee
Parallel Committee
Current Stage
6060 - Document made available - Publishing
Start Date
13-Aug-2003
Completion Date
13-Aug-2003

Relations

Buy Standard

Standard
EN 62155:2004
English language
54 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI SIST EN 62155:2004

STANDARD
september 2004
Hollow pressurized and unpressurized ceramic and glass insulators for use in
electrical equipment with rated voltages greater than 1000 V (IEC 62155:2003,
modified)
ICS 29.080.10 Referenčna številka
SIST EN 62155:2004(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

NORME CEI
INTERNATIONALE IEC
62155
INTERNATIONAL
Première édition
STANDARD
First edition
2003-05
Isolateurs creux avec ou sans pression interne,
en matière céramique ou en verre, pour utilisation
dans des appareillages prévus pour des tensions
nominales supérieures à 1 000 V
Hollow pressurized and unpressurized ceramic
and glass insulators for use in electrical
equipment with rated voltages greater than 1 000 V
© IEC 2003 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch  Web: www.iec.ch
CODE PRIX
X
Commission Electrotechnique Internationale PRICE CODE
International Electrotechnical Commission
ɆɟɠɞɭɧɚɪɨɞɧɚɹɗɥɟɤɬɪɨɬɟɯɧɢɱɟɫɤɚɹɄɨɦɢɫɫɢɹ
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 2 ----------------------

62155 © IEC:2003 – 3 –
CONTENTS
FOREWORD . 7
1 Scope and object . 9
1.1 General . 9
1.2 Hollow insulators or hollow insulator bodies intended for general use . 9
1.3 Ceramic hollow insulators intended for use with permanent gas pressure .11
2 Normative references.11
3 Terms and definitions .13
4 Insulating materials.19
5 General recommendations for design.19
5.1 General recommendations for design of hollow insulators and hollow insulator
bodies intended for general use.19
5.2 Design rules for hollow insulators and hollow insulator bodies for use with
permanent gas pressure .19
6 Classification of the tests, sampling rules and procedures .25
6.1 Classification of the tests.25
6.2 Relevant tests for type, sample and routine tests.27
6.3 Hollow insulator or hollow insulator body selection .29
6.4 Retest procedure for sample tests .31
6.5 Quality assurance.31
7 General test procedures and requirements .33
7.1 Verification of the dimensions and roughness of ground surfaces .33
7.2 Mechanical failing load tests.43
7.3 Temperature cycle test .49
7.4 Porosity test .53
7.5 Galvanizing test.55
8 Type tests.57
8.1 Tests .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.