EN ISO 1460:1994

Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area (ISO 1460:1992)

The method is based on dissolving the coating on a surface of known area in inhibited acid and determination of the resultant loss in mass by weighing the sample before and after dissolving. Since knowledge of area of the surface is essential, it is mainly applicable to shapes whose areas are easy to determine.

Metallische Überzüge - Feuerverzinkung auf Eisenwerkstoffen - Gravimetrisches Verfahren zur Bestimmung der Masse pro Flascheneinheit (ISO 1460:1992)

Diese Internationale Norm legt ein Verfahren für die Bestimmung der Masse pro Flächeneinheit von Feuerverzinkungen auf Eisenwerkstoffen fest. Da die genaue Kenntnis der Größe der Oberfläche wesentlich ist, ist diese Internationale Norm hauptsächlich für Gegenstände mit solchen Formen anwendbar, deren Flächen leicht zu bestimmen sind. Falls bei Proben mit schwer zu bestimmender Oberfläche die Erfordernisse des Abschnitts 5 nicht erfüllt werden, ist die Masse der Schicht des Feuerverzinkungsüberzuges durch ein anderes Verfahren zu bestimmen.

Revêtements métalliques - Revêtements de galvanisation à chaud sur métaux ferreux - Détermination gravimétrique de la masse par unité de surface (ISO 1460:1992)

La présente Norme internationale prescrit une méthode pour la détermination de la masse par unité de surface des revêtements de galvanisation à chaud sur métaux ferreux. La connaissance exacte de l'aire de la surface revêtue de zinc étant indispensable, la présente Norme internationale est essentiellement applicable aux formes dont les surfaces sont faciles à déterminer. Si, avec des échantillons épais, les prescriptions de l'article 5 ne peuvent être satisfaites, la masse du revêtement de galvanisation à chaud doit être déterminée au moyen d'une autre méthode.

Kovinske prevleke - Prevleke na železnem materialu, nanesene z vročim pocinkanjem - Gravimetrijski postopki za ugotavljanje mase nanosa na enoto površine (ISO 1460:1992)

General Information

• Status: Withdrawn
• Publication Date: 27-Oct-1994
• Withdrawal Date: 22-Sep-2020
• ICS: 25.220.40 - Metallic coatings
• Technical Committee: CEN/TC 262 - Metallic and other inorganic coatings
• Drafting Committee: CEN/TC 262/SC 1/WG 2 - Hot dip galvanized coatings
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 23-Sep-2020
• Ref Project: SIST EN ISO 1460:1999 - Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area (ISO 1460:1992)

Relations

• Replaced By: EN ISO 1460:2020 - Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area (ISO 1460:2020)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.URþLPMetallische Überzüge - Feuerverzinkung auf Eisenwerkstoffen - Gravimetrisches Verfahren zur Bestimmung der Masse pro Flascheneinheit (ISO 1460:1992)Revetements métalliques - Revetements de galvanisation a chaud sur métaux ferreux - Détermination gravimétrique de la masse par unité de surface (ISO 1460:1992)Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area (ISO 1460:1992)25.220.40Kovinske prevlekeMetallic coatingsICS:Ta slovenski standard je istoveten z:EN ISO 1460:1994SIST EN ISO 1460:1999en01-oktober-1999SIST EN ISO 1460:1999SLOVENSKI
STANDARD
INTERNATIONAL STANDARD ISO 1460 Second edition 1992-10-01 Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area Re v& temen ts m6 talliyues - ßevetemen ts de galvanisation 3 chaud sur m6 taux fereux - D&ermination gravim&rique de Ia masse par unit6 de sun’ace Reference number ISO 1460:1992(E) SIST EN ISO 1460:1999

ISO 1460: 1992(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national Standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Esch member body interested in a subiect foa which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmentaI, in liaison with ISO, also take part in the werk. ISO collaborates closely with the international Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard ISO 1460 was prepared by Technical Committee lSO/TC 107, Meta/k and other inorganic csatings, Sub-Committee SC 4, Hot dip coatings (galvanized, etc.). This second edition cancels and replaces the first edition (ISO 1460:1973), clauses 3 (formerly 4) and 7 sf which have been tech- nically revised. 63 ISO 1992 All rights reserved. No patt of this publication may be reproduced or utilized in any form or by any means, electronie or mechanical, including photocopying and microfilm, without per- mission in writing from the publisher. International Organization for Standardization Case Postale 56 l CH-l 211 Geneve 20 l Switzerland Printed in Switzerland ii SIST EN ISO 1460:1999

INTERNATIONAL STANDARD ISO 1460:1992(E) M.etallic coatings -1 Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area 1 Scope This International Standard specifies a method of de- termining the mass per unit area of hot dip galvanized coatings on ferrous materials. Since as exact knowledge of the area of the surface is essential, this International Standard is mainly ap- plicable to shape
...