EN 61300-2-5:2002

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion/twist

Establishes a test to determine the ability of the cable attachment element of the device under test to withstand torsional loads, as might be experienced during installation and normal service, while under tension. The scope of the test also includes those elements designed for ribbon cables.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-5: Prüfungen - Torsion/Verdrehung

Dispositifs d'interconnexion et composants passifs à fibres optiques - Procédures fondamentales d'essais et de mesures - Partie 2-5: Essais - Torsion/rotation

Etablit un essai pour déterminer l'aptitude de l'élément de la fixation du câble au dispositif en essai à résister aux efforts de torsion sous tension qui pourraient se produire pendant l'installation et dans des conditions normales de fonctionnement. Le domaine d'application de l'essai comprend également les éléments conçus pour les câbles à rubans.

Povezovalne naprave in pasivne komponente optičnih vlaken – Postopki osnovnega preskušanja in merjenja – 2-5. del: Testi; Torzija/Obrat (IEC 61300-2-5:2002)*

General Information

• Status: Withdrawn
• Publication Date: 19-Dec-2002
• Withdrawal Date: 31-Oct-2005
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Parallel Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 18-Mar-2012
• Completion Date: 18-Mar-2012
• Ref Project: SIST EN 61300-2-5:2004 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-5: Tests - Torsion/twist

Relations

• Replaces: EN 61300-2-5:1997 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion/twist
• Effective Date: 29-Jan-2023
• Replaced By: EN 61300-2-5:2011 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI SIST EN 61300-2-5:2004

STANDARD
september 2004
Povezovalne naprave in pasivne komponente optičnih vlaken – Postopki
osnovnega preskušanja in merjenja – 2-5. del: Testi; Torzija/Obrat (IEC 61300-
2-5:2002)*
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-5: Tests - Torsion/twist (IEC 61300-2-5:2002)
ICS 33.180.20 Referenčna številka
SIST EN 61300-2-5:2004(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 61300-2-5
NORME EUROPÉENNE
EUROPÄISCHE NORM December 2002

ICS 33.180.20 Supersedes EN 61300-2-5:1997


English version


Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures
Part 2-5: Tests - Torsion/twist
(IEC 61300-2-5:2002)


Dispositifs d'interconnexion  Lichtwellenleiter-Verbindungselemente
et composants passifs à fibres optiques - und passive Bauteile -
Méthodes fondamentales d'essais Grundlegende Prüf- und Messverfahren
et de mesures Teil 2-5: Prüfungen - Torsion/Verdrehung
Partie 5: Essais - Torsion/rotation (IEC 61300-2-5:2002)
(CEI 61300-2-5:2002)






This European Standard was approved by CENELEC on 2002-11-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 61300-2-5:2002 E

---------------------- Page: 2 ----------------------

EN 61300-2-5:2002 - 2 -
Foreword

The text of document 86B/1744/FDIS, future edition 2 of IEC 61300-2-5, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to
the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61300-2-5 on 2002-11-01.

This European Standard supersedes EN 61300-2-5:1997.

The following dates were fixed:

– latest date by which the EN has to be implemented
 at national level by publication of an identical
 national standard or by endorsement (dop) 2003-08-01

– latest date by which the national standards conflicting
 with the EN have to be withdrawn (dow) 2005-11-01

Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________

Endorsement notice

The text of the International Standard IEC 61300-2-5:2002 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61300-2-5:2002
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1) 2)
IEC 61300-1 - Fibre optic interconnecting devices and EN 61300-1 1997
passive components - Basic test and
measurement procedures
Part 1: General and guidance

1) 2)
IEC 61300-3-1 - Part 3-1: Examinations and EN 61300-3-1 1997
measurements - Visual examination

1) 2)
IEC 61300-3-3 - Part 3-3:
...