Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 209: Heat-shrinkable polyolefin sleeving, general purpose, flame retarded

IEC 60684-3-116:2010 gives the requirements for two types of general purpose, flexible, flame retarded, heat-shrinkable polyolefin sleeving. This sleeving has been found suitable for use at temperatures up to 125 °C. - Type A - Highly flame retarded - Type B - Flame retarded This edition has been aligned with UL 224 for 125 °C flexible heat-shrinkable polyolefin tubing.

Isolierschläuche - Teil 3: Anforderungen für einzelne Schlauchtypen - Blatt 209: Polyolefin-Wärmeschrumpfschläuche, Standardtyp, flammwidrig

Gaines isolantes souples - Partie 3: Spécifications pour types particuliers de gaines - Feuille 209: Gaines thermorétractables, en polyoléfine, d'utilisation générale, ignifugées

La CEI 60684-3-209:2010 donne les exigences pour deux types de gaines souples, thermorétractables, en polyoléfine, ignifugées d'utilisation générale. Ces gaines se sont révélées être adaptées à une utilisation à des températures jusqu'à 125 °C. - Type A - Hautement ignifugé - Type B - Ignifugé Cette édition a été alignée sur la UL 224 pour tuyaux souples thermorétractables à 125 °C en polyoléfine.

Gibke izolacijske cevi - 3. del: Specifikacije za posamezne tipe cevi - 209. list: Toplotno skrčljive poliolefinske cevi za splošne namene, ognjevarne (IEC 60684-3-209:2010)

Ta del IEC 60684 podaja zahteve za dva tipa gibkih, ognjevarnih ter toplotno krčljivih poliolefinskih cevi za splošne namene. Za to cev je bilo ugotovljeno, da je primerna za uporabo pri temperaturah do 125 °C. – Tip A – Visoko ognjevarna – Tip B – Ognjevarna. Minimalne predložene in maksimalne zajete notranje premere bo določil proizvajalec; le-ti bodo ustrezali minimalni debelini stene, podani v Razpredelnici 2. Običajno je na voljo z velikostjo odprte cevi do 75 mm in v naslednjih barvah:  črna, rjava, bela, rdeča, rumena, zelena, modra, oranžna, vijoličasta, siva in rumeno/zelena. Materiali, skladni s to specifikacijo, ustrezajo vzpostavljenim ravnem delovanja. Vendar mora uporabnik material za določeno uporabo izbrati na podlagi dejanskih zahtev za ustrezno delovanje pri takšni uporabi, in ne le na podlagi same specifikacije.

General Information

Status
Published
Publication Date
08-Jul-2010
Drafting Committee
Parallel Committee
Current Stage
6060 - Document made available - Publishing
Start Date
09-Jul-2010
Completion Date
09-Jul-2010

Relations

Buy Standard

Standard
EN 60684-3-209:2010
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60684-3-209:2010
01-september-2010
1DGRPHãþD
SIST EN 60684-3-209:2004

*LENHL]RODFLMVNHFHYLGHO6SHFLILNDFLMH]DSRVDPH]QHWLSHFHYLOLVW

7RSORWQRVNUþOMLYHSROLROHILQVNHFHYL]DVSORãQHQDPHQHRJQMHYDUQH ,(&



Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet

209: Heat-shrinkable polyolefin sleeving, general purpose, flame retarded (IEC 60684-3-

209:2010)
Isolierschläuche - Teil 3: Anforderungen für einzelne Schlauchtypen - Blatt 209:

Polyolefin-Wärmeschrumpfschläuche, Standardtyp, flammwidrig (IEC 60684-3-209:2010)

Gaines isolantes souples - Partie 3: Spécifications pour types particuliers de gaines -

Feuille 209: Gaines thermorétractables, en polyoléfine, d'utilisation générale, ignifugées

(CEI 60684-3-209:2010)
Ta slovenski standard je istoveten z: EN 60684-3-209:2010
ICS:
29.035.20 3ODVWLþQLLQJXPHQLL]RODFLMVNL Plastics and rubber insulating
PDWHULDOL materials
SIST EN 60684-3-209:2010 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 60684-3-209:2010
---------------------- Page: 2 ----------------------
SIST EN 60684-3-209:2010
EUROPEAN STANDARD
EN 60684-3-209
NORME EUROPÉENNE
July 2010
EUROPÄISCHE NORM
ICS 29.035.20 Supersedes EN 60684-3-209:2003
English version
Flexible insulating sleeving -
Part 3: Specifications for individual types of sleeving -
Sheet 209: Heat-shrinkable polyolefin sleeving, general purpose, flame
retarded
(IEC 60684-3-209:2010)
Gaines isolantes souples - Isolierschläuche -
Partie 3: Spécifications pour types Teil 3: Anforderungen für einzelne
particuliers de gaines - Schlauchtypen -
Feuille 209: Gaines thermorétractables, Blatt 209: Polyolefin-
en polyoléfine, d'utilisation générale, Wärmeschrumpfschläuche, Standardtyp,
ignifugées flammwidrig
(CEI 60684-3-209:2010) (IEC 60684-3-209:2010)

This European Standard was approved by CENELEC on 2010-07-01. CENELEC members are bound to comply

with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard

the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on

application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CENELEC member into its own language and notified

to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,

the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,

Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,

Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60684-3-209:2010 E
---------------------- Page: 3 ----------------------
SIST EN 60684-3-209:2010
EN 60684-3-209:2010 - 2 -
Foreword

The text of document 15/561/FDIS, future edition 3 of IEC 60684-3-209, prepared by IEC TC 15, Solid

electrical insulating materials, was submitted to the IEC-CENELEC parallel vote and was approved by

CENELEC as EN 60684-3-209 on 2010-07-01.
This European Standard supersedes EN 60684-3-209:2003.

This EN 60684-3-209:2010 has been aligned with UL 224 for 125 °C flexible heat-shrinkable polyolefin

tubing.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent

rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2011-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2013-07-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice

The text of the International Standard IEC 60684-3-209:2010 was approved by CENELEC as a European

Standard without any modification.
__________
---------------------- Page: 4 ----------------------
SIST EN 60684-3-209:2010
- 3 - EN 60684-3-209:2010
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated

references, only the edition cited applies. For undated references, the latest edition of the referenced

document (including any amendments) applies.

NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD

applies.
Publication Year Title EN/HD Year
IEC 60684-1 2003 Flexible insulating sleeving - EN 60684-1 2003
Part 1: Definitions and general requirements
IEC 60684-2 1997 Flexible insulating sleeving - EN 60684-2 1997
+ A1 2003 Part 2: Methods of test + A1 2003
+ A2 2005 + A2 2005
IEC 60757 1983 Code for designation of colours HD 457 S1 1985
---------------------- Page: 5 ----------------------
SIST EN 60684-3-209:2010
---------------------- Page: 6 ----------------------
SIST EN 60684-3-209:2010
IEC 60684-3-209
Edition 3.0 2010-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Flexible insulating sleeving –
Part 3: Specifications for individual types of sleeving –
Sheet 209: Heat-shrinkable, polyolefin sleeving, general purpose, flame retarded
Gaines isolantes souples –
Partie 3: Spécifications pour types particuliers de gaines –
Feuille 209: Gaines thermorétractables, en polyoléfine, d’utilisation générale,
ignifugées
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX
ICS 29.035.20 ISBN 978-2-88910-965-4
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN 60684-3-209:2010
– 2 – 60684-3-209 © IEC:2010
CONTENTS

FOREWORD...........................................................................................................................3

INTRODUCTION.....................................................................................................................5

1 Scope...............................................................................................................................6

2 Normative references........................................................................................................6

3 Designation ......................................................................................................................6

4 Conditions of test..............................................................................................................7

5 Requirements ...................................................................................................................7

6 Sleeving conformance.......................................................................................................7

Table 1 – Required test samples .............................................................................................7

Table 2 – Minimum recovered wall thicknesses for maximum recovered internal

diameters................................................................................................................................7

Table 3 – Property requirements .............................................................................................8

Table 4 – Mandrel diameters for heat shock and low temperature bending...............................9

---------------------- Page: 8 ----------------------
SIST EN 60684-3-209:2010
60684-3-209 © IEC:2010 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FLEXIBLE INSULATING SLEEVING –
Part 3: Specifications for individual types of sleeving –
Sheet 209: Heat-shrinkable, polyolefin sleeving,
general purpose, flame retarded
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

international co-operation on all questions concerning standardization in the electrical and electronic fields. To

this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,

Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC

Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested

in the subject dealt with may participate in this preparatory work. International, governmental and non-

governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely

with the International Organization for Standardization (ISO) in accordance with conditions determined by

agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

consensus of opinion on the relevant subjects since each technical committee has representation from all

interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

Publications is a
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.