EN IEC 60317-72:2020

Specifications for particular types of winding wires - Part 72: Polyester glass-fibre wound silicone resin/varnish impregnated, bare or enamelled round copper wire, temperature index 200

IEC 60317-72:2020 is available as IEC 60317-72:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60317-72: 2020 specifies the requirements of polyester glass-fibre wound silicone resin/varnish impregnated, bare, grade 1 or grade 2 enamelled round copper winding wire, temperature index 200. NOTE For this type of wire, the heat shock test is inappropriate and therefore a heat shock temperature cannot be established. Consequently, a class based on the requirements for temperature index and heat shock temperature cannot be specified. The nominal conductor diameters are specified in IEC 60317-0-10:2017, Clause 4. This second edition cancels and replaces the first edition published in 2017. The document 55/1768/CDV, circulated to the National Committees as Amendment 1, led to the publication of this new edition. This edition includes the following significant technical changes with respect to the previous edition: - modification of the title; - revision to the Scope; - revision to 3.2.2.

Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 72: Runddrähte aus Kupfer, blank oder lackiert, mit Polyester-Glas-Fasergewebe umsponnen, mit Silikon-Harz oder Lack imprägniert, Klasse 200

Spécifications pour types particuliers de fils de bobinage - Partie 72: Fil de section circulaire en cuivre nu ou émaillé, guipé de fibres de verre polyester imprégnées de vernis ou de résine silicone, d'indice de température 200

IEC 60317-72:2020 est disponible sous forme de IEC 60317-72:2020 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.IEC 60317-72:2020 spécifie les exigences relatives au fil de bobinage de section circulaire en cuivre nu ou émaillé de grade 1 ou de grade 2, guipé de fibres de verre polyester imprégnées de vernis ou de résine silicone, d’indice de température 200. NOTE Pour ce type de fil, l'essai de choc thermique n'est pas approprié et c'est la raison pour laquelle il n'est pas possible d'établir une température de choc thermique. Par conséquent, il n’est pas possible de spécifier une classe fondée sur les exigences d'indice de température et de température de choc thermique. Les diamètres nominaux du conducteur sont spécifiés à l’Article 4 de l’IEC 60317-0-10:2017. Cette deuxième édition de l'IEC 60317-72 annule et remplace la première édition parue en 2017. Le document 55/1768/CDV, circulé comme Amendement 1 auprès des Comités nationaux de l'IEC, a conduit à la publication de cette nouvelle édition. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - modification du titre; - révision du Domaine d'application; - révision du 3.2.2.

Specifikacije za posebne vrste navijalnih žic - 72. del: Bakrena žica z okroglim prerezom, ovita s poliestrskim steklenim vlaknom in impregnirana s silikonsko smolo ali lakom, gola ali emajlirana, temperaturni indeks 200 (IEC 60317-72:2020)

General Information

• Status: Published
• Publication Date: 18-Jun-2020
• ICS: 29.060.10 - Wires
• Technical Committee: CLC/TC 55 - Winding wires
• Drafting Committee: IEC/TC 55 - IEC_TC_55
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 19-Jun-2020
• Completion Date: 19-Jun-2020
• Ref Project: SIST EN IEC 60317-72:2020 - Specifications for particular types of winding wires - Part 72: Polyester glass-fibre wound silicone resin/varnish impregnated, bare or enamelled round copper wire, temperature index 200 (IEC 60317-72:2020)

Relations

• Replaces: EN 60317-72:2017 - Specifications for particular types of winding wires - Part 72: Polyester glass-fibre wound fused, silicone resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200
• Effective Date: 31-Jul-2018

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 60317-72:2020
01-september-2020
Nadomešča:
SIST EN 60317-72:2017
Specifikacije za posebne vrste navijalnih žic - 72. del: Bakrena žica z okroglim
prerezom, ovita s poliestrskim steklenim vlaknom in impregnirana s silikonsko
smolo ali lakom, gola ali emajlirana, temperaturni indeks 200 (IEC 60317-72:2020)
Specifications for particular types of winding wires - Part 72: Polyester glass-fibre wound
silicone resin/varnish impregnated, bare or enamelled round copper wire, temperature
index 200 (IEC 60317-72:2020)
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten – Teil 72:
Runddrähte aus Kupfer, blank oder lackiert, mit Polyesterfasern umwickelt und
verschmolzen, mit Silikon-Harz oder Lack imprägniert, Klasse 200 (IEC 60317-72:2020)
Spécifications pour types particuliers de fils de bobinage - Partie 72: Fil de section
circulaire en cuivre nu ou émaillé, guipé de fibres de verre polyester fondues,
imprégnées de vernis ou de résine silicone, d'indice de température 200 (IEC
60317-72:2020)
Ta slovenski standard je istoveten z: EN IEC 60317-72:2020
ICS:
29.060.10 Žice Wires
77.150.30 Bakreni izdelki Copper products
SIST EN IEC 60317-72:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 60317-72:2020

---------------------- Page: 2 ----------------------
SIST EN IEC 60317-72:2020


EUROPEAN STANDARD EN IEC 60317-72

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2020
ICS 29.060.10 Supersedes EN 60317-72:2017 and all of its
amendments and corrigenda (if any)
English Version
Specifications for particular types of winding wires - Part 72:
Polyester glass-fibre wound silicone resin/varnish impregnated,
bare or enamelled round copper wire, temperature index 200
(IEC 60317-72:2020)
Spécifications pour types particuliers de fils de bobinage - Technische Lieferbedingungen für bestimmte Typen von
Partie 72: Fil de section circulaire en cuivre nu ou émaillé, Wickeldrähten - Teil 72: Runddrähte aus Kupfer, blank
guipé de fibres de verre polyester imprégnées de vernis ou oder lackiert, mit Polyesterfasern umsponnen, mit Silikon-
de résine silicone, d'indice de température 200 Harz oder Lack imprägniert, Klasse 200
(IEC 60317-72:2020) (IEC 60317-72:2020)
This European Standard was approved by CENELEC on 2020-05-28. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 60317-72:2020 E

---------------------- Page: 3 ----------------------
SIST EN IEC 60317-72:2020
EN IEC 60317-72:2020 (E)
European foreword
The text of document 55/1768/CDV, future edition 2 of IEC 60317-72, prepared by IEC/TC 55
"Winding wires" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN IEC 60317-72:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-02-28
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-05-28
document have to be withdrawn

This document supersedes EN 60317-72:2017 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 60317-72:2020 was approved by CENEL
...