EN 61347-2-13:2006

Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules

This part of IEC 61347 specifies particular safety requirements for electronic controlgear for use on d.c. supplies up to 250 V and a.c. supplies up to 1 000 V at 50 Hz or 60 Hz and at an output frequency which can deviate from the supply frequency, associated with LED modules.

Geräte für Lampen - Teil 2-13: Besondere Anforderungen an gleich- oder wechselstromversorgte elektronische Betriebsgeräte für LED-Module

Appareillages de lampes - Partie 2-13: Exigences particulières pour les appareillages électroniques alimentés en courant continu ou alternatif pour les modules de DEL

La présente partie de la CEI 61347 spécifie les exigences particulières de sécurité pour les appareillages électroniques alimentés en courant continu ou alternatif pour l'utilisation sur des alimentations en courant continu jusqu'à 250 V et sur des alimentations en courant alternatif jusqu'à 1 000 V en 50 Hz ou 60 Hz et avec une fréquence de sortie qui peut être différente de la fréquence d'alimentation, associée avec des modules à DEL.

Krmilne stikalne naprave - 2-13. del: Posebne zahteve za enosmerno ali izmenično napajane krmilne stikalne naprave za module LED (IEC 61347-2-13:2006)

General Information

• Status: Withdrawn
• Publication Date: 01-Aug-2006
• Withdrawal Date: 30-Jun-2009
• ICS: 29.140.99 - Other standards related to lamps
• Technical Committee: CLC/TC 34 - 'Lamps and related equipment
• Drafting Committee: IEC/SC 34C - IEC_SC_34C
• Parallel Committee: IEC/SC 34C - IEC_SC_34C
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 08-Oct-2017
• Completion Date: 08-Oct-2017
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Directive: 2014/53/EU - Directive 2014/53/EU of The European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
• Directive: 73/23/EEC - Electrical equipment designed for use within certain voltage limits
• Ref Project: SIST EN 61347-2-13:2007 - Lamp controlgear -- Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules

Relations

• Replaced By: EN 61347-2-13:2014 - Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2007
.UPLOQHVWLNDOQHQDSUDYHGHO3RVHEQH]DKWHYH]DHQRVPHUQRDOLL]PHQLþQR
QDSDMDQHNUPLOQHVWLNDOQHQDSUDYH]DPRGXOH/(',(&
Lamp controlgear -- Part 2-13: Particular requirements for d.c. or a.c. supplied electronic
controlgear for LED modules
Geräte für Lampen -- Teil 2-13: Besondere Anforderungen an gleich- oder
wechselstromversorgte elektronische Betriebsgeräte für LED-Module
Appareillages de lampes -- Partie 2-13: Exigences particulières pour les appareillages
électroniques alimentés en courant continu ou alternatif pour les modules de DEL
Ta slovenski standard je istoveten z: EN 61347-2-13:2006
ICS:
29.130.01 Stikalne in krmilne naprave Switchgear and controlgear
na splošno in general
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61347-2-13
NORME EUROPÉENNE
August 2006
EUROPÄISCHE NORM
ICS 29.140.99
English version
Lamp controlgear
Part 2-13: Particular requirements
for d.c. or a.c. supplied electronic controlgear
for LED modules
(IEC 61347-2-13:2006)
Appareillages de lampes  Geräte für Lampen
Partie 2-13: Exigences particulières pour Teil 2-13: Besondere Anforderungen an
les appareillages électroniques alimentés gleich- oder wechselstromversorgte
en courant continu ou alternatif pour elektronische Betriebsgeräte für
les modules de DEL LED-Module
(CEI 61347-2-13:2006) (IEC 61347-2-13:2006)

This European Standard was approved by CENELEC on 2006-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61347-2-13:2006 E
Foreword
The text of document 34C/730/FDIS, future edition 1 of IEC 61347-2-13, prepared by SC 34C, Auxiliaries
for lamps, of IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel vote
and was approved by CENELEC as EN 61347-2-13 on 2006-07-01.
This standard shall be used in conjunction with EN 61347-1:2001.
In this standard, the following print types are used:
– requirements: in roman type;
– test specifications: in italic type;
– notes: in smaller roman type;
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2007-04-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2009-07-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61347-2-13:2006 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 61347-2-13:2006
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60051 Series Direct acting indicating analogue electrical EN 60051 Series
measuring instruments and their accessories

1) 2)
IEC 60065 (mod) 1985 Safety requirements for mains operated EN 60065 1993

electronic and related apparatus for + A11 1997
household and similar general use

IEC/TR 60083 2004 Plugs and socket-outlets for domestic and - -
similar general use standardized in member
countries of IEC
IEC 60085 2004 Electrical insulation - Thermal classification EN 60085 2004

IEC 60127 Series Miniature fuses EN 60127 Series

IEC 60269-2 1986 Low-voltage fuses EN 60269-2 1995
A1 1995 Part 2: Supplementary requirements for fuses A1 1998
A2 2001 for use by authorized persons (fuses mainly A2 2002
for industrial application)
IEC 60269-2-1 2004 Low-voltage fuses HD 60269-2-1 2005
(mod) Part 2-1: Supplementary requirements for
fuses for use by authorized persons (fuses
mainly for industrial application) - Sections I
to VI: Examples of types of standardized
fuses
IEC 60269-3 1987 Low-voltage fuses EN 60269-3 1995
Part 3: Supplementary requirements for fuses
for use by unskilled persons (fuses mainly for
household and similar applications)

IEC 60269-3-1 2004 Low-voltage fuses HD 60269-3-1 2004
(mod) Part 3-1: Supplementary requirements for
fuses for use by unskilled persons (fuses
mainly for household and similar
applications) - Sections I to IV: Examples of
types of standardized fuses
IEC 60317-0-1 1997 Specifications for particular types of winding EN 60317-0-1 1998
wires
Part 0-1: General requirements - Enamelled
round copper wire
1)
EN 60065 includes A1 + A2 + A3 to IEC 60065 (mod).
2)
EN 60065 is superseded by EN 60065:2002, which is based on IEC 60065:2001(mod).

Publication Year Title EN/HD Year
IEC 60384-14 2005 Fixed capacitors for use in electronic EN 60384-14 2005
equipment
Part 14: Sectional specification - Fixed
capacitors for electromagnetic interference
suppression and connection to the supply
mains
IEC 60417-DB data- Graphical symbols for use on equipment - -
base
IEC 60454 Series Specifications for pressure-sensitive adhesive EN 60454 Series
tapes for electrical purposes
IEC 60598-1 (mod) 2003 Luminaires EN 60598-1 2004
Part 1: General requirements and tests

3) 4)
IEC 60598-2-6 - Luminaires EN 60598-2-6 1994
Part 2: Particular requirements - Section 6:
Luminaires with built-in transformers or
convertors for filament lamps
IEC 60906 Series IEC system of plugs and socket-outlets for - -
household and similar purposes
Part 1: Plugs and socket-outlets
16 A 250 V a.c.
IEC 60906-1 1986 IEC system of plugs and socket-outlets for - -
household and similar purposes
Part 1: Plugs and socket-outlets
16 A 250 V a.c.
IEC 60950-1 (mod) 2005 Information technology equipment - Safety EN 60950-1 2006
Part 1: General requirements
IEC 61347-1 2000 Lamp controlgear EN 61347-1 2001
Part 1: General and safety requirements + corr. July 2003
A1 2003 - -
5)
IEC 61558-1 (mod) 1997 Safety of power transformers, power supply EN 61558-1 1997
units and similar + corr. April 2003
A1 1998 Part 1: General requirements and tests A1 1998

A11 2003
3)
Undated reference.
4)
Valid edition at date of issue.
5)
EN 61558-1 is superseded by EN 61558-1:2005, which is based on IEC 61558-1:2005.

NORME CEI
INTERNATIONALE
IEC
61347-2-13
INTERNATIONAL
Première édition
STANDARD
First edition
2006-05
Appareillages de lampes –
Partie 2-13:
Exigences particulières pour les appareillages
électroniques alimentés en courant continu ou
alternatif pour les modules de DEL

Lamp controlgear –
Part 2-13:
Particular requirements for d.c. or a.c. supplied
electronic controlgear for LED modules
 IEC 2006 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
W
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

61347-2-13  IEC:2006 – 3 –
CONTENTS
FOREWORD.7
INTRODUCTION.11

1 Scope.13
2 Normative references .13
3 Terms and definitions .17
4 General requirements .19
5 General notes on tests .19
6 Classification.19
7 Marking .21
8 Protection against accidental contact with live parts .21
9 Terminals .23
10 Provisions for protective earthing .23
11 Moisture resistance and insulation.23
12 Electric strength .23
13 Thermal endurance test for windings of ballasts .23
14 Fault conditions .23
15 Transformer heating .25
16 Abnormal conditions .25
17 Construction .27
18 Creepage distances and clearances .27
19 Screws, current-carrying parts and connections.29
20 Resistance to heat, fire and tracking.29
21 Resistance to corrosion .29

Annex A (normative) Test to establish whether a conductive part is a live part which
may cause an electric shock .31
Annex B (normative) Particular requirements for thermally protected lamp controlgear .31
Annex C (normative) Particular requirements for electronic lamp controlgear with
means of protection against overheating.31
Annex D (normative) Requirements for carrying out the heating tests of thermally
protected lamp controlgear .31
Annex E (normative) Use of constant S other than 4 500 in t tests .31
w
Annex F (normative) Draught-proof enclosure.33
Annex G (normative) Explanation of the derivation of the values of pulse voltages .33
Annex H (normative) Tests .33
Annex I (normative) Particular additional requirements for independent SELV d.c. or
a.c. supplied electronic controlgear for LED modules.35

Bibliography.75

61347-2-13  IEC:2006 – 5 –
Table I.1 – Values of temperature rise in normal use .49
Table I.2 – Test temperature and testing time (in days) per cycle.51
Table I.3 – Maximum values of temperature rises under short circuit or overload
conditions .
...