Optical fibre cables - Part 3-40: Outdoor cables - Family specification for sewer cables and conduits for installation by blowing and/or pulling in non-man accessible storm and sanitary sewers

IEC 60794-3-40:2008(E) is part of IEC 60794 family specification that covers sewer cables and conduits for installation by blowing and/or pulling in non-man accessible storm and sanitary sewers, also applicable for man-accessible and lateral ones. Systems built with components covered by this standard are subject to the requirements of sectional specification IEC 60794-3. This standard is to be used in conjunction with IEC 60794-1-1, IEC 60794-1-2 and IEC 60794-3.

Lichtwellenleiterkabel - Teil 3-40: Außenkabel - Familienspezifikation für Kabel in Abwasserkanälen für die Verlegung durch Einblasen und/oder Einziehen in nicht zugänglichen Regenwasser- und Abwasserkanälen

Câbles à fibres optiques - Partie 3-40: Câbles extérieurs - Spécification de famille relative aux câbles et conduits cheminant dans les égouts destinés à être installés par soufflage et/ou tirage dans les conduites d'eaux usées pluviales et sanitaires inaccessibles

La CEI 60794-3-40:2008 est une spécification de famille qui s'applique aux câbles en égouts et aux conduites, installés par soufflage et/ou tirage dans les évacuations d'eaux pluviales et sanitaires non accessibles par l'homme, elle s'applique également aux égouts et aux conduits secondaires accessibles par l'homme. Les systèmes intégrant des éléments couverts par la présente norme sont soumis aux exigences de la spécification intermédiaire CEI 60794-3. Cette publication doit être lue conjointement avec la CEI 60794-1-1:2011, la CEI 60794-1-2:2003 et la CEI 60794-3:2001.

Optični kabli - 3-40. del: Kabli za zunanjo uporabo - Skupinska specifikacija za kanalizacijske kable in kanale za montažo z vpihavanjem oziroma vlečenjem v meteorne in sanitarne kanale, nedostopne za človeka (IEC 60794-3-40:2008)

General Information

Status
Published
Publication Date
02-Dec-2008
Withdrawal Date
31-Oct-2011
Current Stage
6060 - Document made available - Publishing
Start Date
03-Dec-2008
Completion Date
03-Dec-2008

Relations

Buy Standard

Standard
EN 60794-3-40:2009
English language
41 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-februar-2009
2SWLþQLNDEOLGHO.DEOL]D]XQDQMRXSRUDER6NXSLQVNDVSHFLILNDFLMD]D
NDQDOL]DFLMVNHNDEOHLQNDQDOH]DPRQWDåR]YSLKDYDQMHPR]LURPDYOHþHQMHPY
PHWHRUQHLQVDQLWDUQHNDQDOHQHGRVWRSQH]DþORYHND ,(&
Optical fibre cables - Part 3-40: Outdoor cables - Family specification for sewer cables
and conduits for installation by blowing and/or pulling in non-man accessible storm and
sanitary sewers (IEC 60794-3-40:2008)
Lichtwellenleiterkabel - Teil 3-40: Außenkabel - Familienspezifikation für Kabel in
Abwasserkanälen für die Verlegung durch Einblasen und/oder Einziehen in nicht
zugänglichen Regenwasser- und Abwasserkanälen (IEC 60794-3-40:2008)
Câbles à fibres optiques - Partie 3-40: Câbles extérieurs - Spécification de famille
relative aux câbles et conduits cheminant dans les égouts destinés à être installés par
soufflage et/ou tirage dans les conduites d'eaux usées pluviales et sanitaires
inaccessibles (CEI 60794-3-40:2008)
Ta slovenski standard je istoveten z: EN 60794-3-40:2008
ICS:
33.180.10 2SWLþQD YODNQDLQNDEOL Fibres and cables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60794-3-40
NORME EUROPÉENNE
December 2008
EUROPÄISCHE NORM
ICS 33.180.10
English version
Optical fibre cables -
Part 3-40: Outdoor cables -
Family specification for sewer cables and conduits
for installation by blowing and/or pulling
in non-man accessible storm and sanitary sewers
(IEC 60794-3-40:2008)
Câbles à fibres optiques -  Lichtwellenleiterkabel -
Partie 3-40: Câbles extérieurs - Teil 3-40: Außenkabel -
Spécification de famille Familienspezifikation
relative aux câbles et conduits für Kabel in Abwasserkanälen
cheminant dans les égouts destinés für die Verlegung durch Einblasen
à être installés par soufflage et/ou tirage und/oder Einziehen in nicht zugänglichen
dans les conduites d'eaux usées pluviales Regenwasser- und Abwasserkanälen
et sanitaires inaccessibles (IEC 60794-3-40:2008)
(CEI 60794-3-40:2008)
This European Standard was approved by CENELEC on 2008-11-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60794-3-40:2008 E
Foreword
The text of document 86A/1228/FDIS, future edition 1 of IEC 60794-3-40, prepared by SC 86A, Fibres
and cables, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 60794-3-40 on 2008-11-01.
This standard is to be used in conjunction with EN 60794-1-1, EN 60794-1-2 and EN 60794-3.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-08-02
– latest date by which the national standards conflicting
(dow) 2011-11-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60794-3-40:2008 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 60794-3-40:2008
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60304 1982 Standard colours for insulation for HD 402 S2 1984
low-frequency cables and wires

1) 2)
IEC 60793-1-20 - Optical fibres - EN 60793-1-20 2002
Part 1-20: Measurement methods and test
procedures - Fibre geometry
1) 2)
IEC 60793-1-40 - Optical fibres - EN 60793-1-40 2003
(mod) Part 1-40: Measurement methods and test
procedures - Attenuation
1) 2)
IEC 60793-1-44 - Optical fibres - EN 60793-1-44 2002
Part 1-44: Measurement methods and test
procedures - Cut-off wavelength

1) 2)
IEC 60793-2 - Optical fibres - EN 60793-2 2008
Part 2: Product specifications - General

1) 2)
IEC 60793-2-50 - Optical fibres - EN 60793-2-50 2008
Part 2-50: Product specifications - Sectional
specification for class B single-mode fibres

1) 2)
IEC 60794-1-1 - Optical fibre cables - EN 60794-1-1 2002
Part 1-1: Generic specification - General

1) 2)
IEC 60794-1-2 - Optical fibre cables - EN 60794-1-2 2003
Part 1-2: Generic specification - Basic optical
cable test procedures
1) 2)
IEC 60794-3 - Optical fibre cables - EN 60794-3 2002
Part 3: Sectional specification - Outdoor
cables
1) 2)
IEC 60794-3-10 - Optical fibre cables - EN 60794-3-10 2002
(mod) Part 3-10: Outdoor cables - Family
specification for duct and directly buried
optical telecommunication cables

IEC 60811-1-1 1993 Insulating and sheathing materials of electric EN 60811-1-1 1995
and optical cables - Common test methods -
Part 1-1: General application - Measurement
of thickness and overall dimensions - Tests for
determining the mechanical properties

1)
Undated reference.
2)
Valid edition at date of issue.

Publication Year Title EN/HD Year

IEC 60811-5-1 1990 Insulating and sheathing materials of electric EN 60811-5-1 1999
(mod) and optical cables - Common test methods -
Part 5-1: Methods specific to filling
compounds - Drop point - Separation of oil -
Lower temperature brittleness - Total acid
number - Absence of corrosive components -
Permittivity at 23 °C - D.C. resistivity at 23 °C
and 100 °C
IEC 60794-3-40
Edition 1.0 2008-10
INTERNATIONAL
STANDARD
Optical fibre cables –
Part 3-40: Outdoor cables – Family specification for sewer cables and conduits
for installation by blowing and/or pulling in non-man accessible storm and
sanitary sewers
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
W
ICS 33.180.10 ISBN 2-8318-1002-4
– 2 – 60794-3-40 © IEC:2008(E)
CONTENTS
FOREWORD.4
1 Scope.6
2 Normative references .6
3 Symbols .7
4 Family specification for sewer cables and conduits for installation by blowing
and/or pulling in sewers (blank detail specification and minimum requirements) .8
4.1 Construction.8
4.1.1 General .8
4.1.2 Conduits.8
4.1.3 Sewer cables.8
4.1.4 Rodent protection .8
4.2 Optical fibres.9
4.2.1 Single-mode dispersion unshifted (B1.1) optical fibre .9
4.2.2 Single mode dispersion shifted (B2) optical fibre .9
4.2.3 Single mode non-zero dispersion (B4) optical fibre .10
4.2.4 Single mode (B6) optical fibre.10
4.2.5 Multimode fibres .10
4.3 Sewer cable constructions.11
4.3.1 Cable for installation within conduits (previously fixed to the sewer
wall) .11
4.3.2 Cable for direct installation into the sewer duct.12
4.3.3 Conduit construction.13
4.4 Installation and operating conditions .13
4.4.1 Tests applicable to cables/cable elements .13
4.4.2 Installation conditions .14
4.5 Mechanical and environmental tests.14
4.5.1 Conduits.14
4.5.2 Cable for installation within conduits (previously fixed to the sewer
wall) .17
4.5.3 Cables for direct installation into the sewer duct .21
Annex A (informative) Blank detail specification.25
Annex B (informative) OF cables for non-man accessible sewers.28
Annex C (informative) Examples of conduits and sewer cables .29
Annex D (informative) Examples of installation schemes.35

Figure C.1 – Dielectric optical fibre sewer cable.29
Figure C.2 – Dielectric optical fibre sewer cable.29
Figure C.3 – Optical fibre sewer cable within a conduit .30
Figure C.4 – Optical fibre sewer cable for direct installation – peripheral strength
members.31
Figure C.5 – Optical fibre sewer cable for direct installation – steel wire armouring .31
Figure C.6 – Optical fibre sewer cable for spanning – peripheral strength members.32
Figure C.7 – Optical fibre sewer cable for spanning – steel wire armouring.32
Figure C.8 – Optical fibre sewer cable for laying – aluminium tape.33
Figure C.9 – Optical fibre sewer cable for laying – corrugated steel .33

60794-3-40 © IEC:2008(E) – 3 –
Figure C.10 – Optical fibre sewer cable for laying – 2-layer-steel wire armouring.34
Figure D.1 – Conduit robotized installation.35
Figure D.2 – Spring loaded stainless-steel ring – conduit fastening.36
Figure D.3 – Schematic drawing robotized installation – Drilling.36
Figure D.4 – Schematic drawing – Spanning of optical fibre cables within sewers .37
Figure D.5 – Schematic drawing – laying on the ground of optical fibre cables within
sewers .37

Table 1 – Single-mode dispersion unshifted (B1.1) optical fibre .9
Table 2 – Single mode dispersion shifted (B2) optical fibre .9
Table 3 – Single mode non-zero dispersion (B4) optical fibre.10
Table 4 – Single mode (B6) optical fibre .10
Table 5 – Characteristics – Cable for installation within conduits (previously fixed to
the sewer wall) .11
Table 6 – Characteristics – Cable for direct installation into the sewer duct .12
Table 7 – Character
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.