Fibre optic interconnecting devices and passive components - Performance standard - Part 382-2: Non-connectorized single-mode bidirectional G-PON-NGA WWDM devices for category C - Controlled environment

IEC 61753-382-2:2015 contains the minimum initial performance, test and measurement requirements and severities which a fibre optic pigtailed wide wavelength division multiplexing (WWDM) device for combining and splitting gigabit-capable passive optical networks (G-PON) up/down signals and next generation access (NGA) bands satisfies in order to be categorized as meeting the requirements of category C (controlled environments), as defined in Annex A of IEC 61753-1:2007. Annex B of this standard provides information concerning the principle and function of the WWDM. Keywords: WWDM, G-PON, NGA, category C

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 382-2: Nicht mit Steckern versehene Einmoden-bidirektionale G-PON-NGA WWDM-Bauteile für die Kategorie C - Kontrollierte Umgebung

Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de performance - Partie 382-2: Dispositifs WWDM G-PON-NGA bidirectionnels unimodaux non connectorisés pour la catégorie C - Environnement contrôlé

L'IEC 61753-382-2:2015 contient les sévérités et les exigences minimales initiales de performances, d'essais et de mesures auxquelles satisfait un dispositif à répartition en longueur d'onde large (WWDM) muni de fibres amorces, pour mélanger et séparer les signaux montants et descendants des réseaux optiques passifs aptes aux gigabits/s (G-PON) et les bandes des accès de prochaine génération (NGA) afin d'être classé comme conforme aux exigences de la catégorie C (environnements contrôlés), comme cela est défini à l'Annexe A de l'IEC 61753-1:2007. L'Annexe B de la présente norme fournit des informations sur le principe et le fonctionnement d'un dispositif WWDM. Mots clés: WWDM, G-PON, NGA, catégorie C

Optični spojni elementi in pasivne komponente - Tehnični standard - 382-2. del: Enorodne dvosmerne G-PON-NGA naprave WWDM brez konektorjev za kategorijo C - Nadzorovano okolje (IEC 61753-382-2:2015)

Ta del standarda IEC 61753 zajema minimalne zahteve in stopnje zahtevnosti za začetno delovanje, preskuse in meritve, ki jih mora svitkasta naprava iz optičnih vlaken za širokopasovni valovni multipleks (WWDM) za združevanje in delitev naraščajočih/padajočih signalov pasivnih optičnih omrežij z gigabitno zmožnostjo (G-PON) ter pasov dostopovnega omrežja naslednje generacije (NGA) izpolnjevati, da izpolnjuje zahteve kategorije C (nadzorovano okolje), kot je določeno v dodatku A standarda IEC 61753-1:2007. Dodatek B tega standarda podaja informacije glede načela in funkcije WWDM.

General Information

Status
Published
Publication Date
11-Feb-2016
Withdrawal Date
09-Sep-2018
Current Stage
6060 - Document made available - Publishing
Start Date
12-Feb-2016
Completion Date
12-Feb-2016

Buy Standard

Standard
EN 61753-382-2:2016 - BARVE
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-maj-2016
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH7HKQLþQLVWDQGDUGGHO
(QRURGQHGYRVPHUQH*3211*$QDSUDYH::'0EUH]NRQHNWRUMHY]DNDWHJRULMR
&1DG]RURYDQRRNROMH ,(&
Fibre optic interconnecting devices and passive components - Performance standard -
Part 382-2: Non-connectorised single-mode bidirectional G-PON-NGA WWDM devices
for category C - Controlled environment (IEC 61753-382-2:2015)
Ta slovenski standard je istoveten z: EN 61753-382-2:2016
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61753-382-2

NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2016
ICS 33.180.20
English Version
Fibre optic interconnecting devices and passive components -
Performance standard - Part 382-2: Non-connectorized single-
mode bidirectional G-PON-NGA WWDM devices for category C -
Controlled environment
(IEC 61753-382-2:2015)
Dispositifs d'interconnexion et composants passifs à fibres Lichtwellenleiter - Verbindungselemente und passive
optiques - Norme de performance - Partie 382-2: Dispositifs Bauteile - Betriebsverhalten - Teil 382-2: Nicht mit Steckern
WWDM G-PON-NGA bidirectionnels unimodaux non versehene Einmoden-bidirektionale G-PON-NGA WWDM-
connectorisés pour la catégorie C - Environnement contrôlé Bauteile für die Kategorie C - Kontrollierte Umgebung
(IEC 61753-382-2:2015) (IEC 61753-382-2:2015)
This European Standard was approved by CENELEC on 2015-12-10. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61753-382-2:2016 E

European foreword
The text of document 86B/3942/FDIS, future edition 1 of IEC 61753-382-2, prepared by SC 86B "Fibre
optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-382-2:2016.
The following dates are fixed:
(dop) 2016-09-10
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2018-09-10
• latest date by which the national standards conflicting with
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61753-382-2:2015 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61300-3-6 NOTE Harmonized as EN 61300-3-6.
IEC 61753-1:2007 NOTE Harmonized as EN 61753-1:2007 (not modified).
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.

Publication Year Title EN/HD Year
IEC 60793-2-50 -  Optical fibres - EN 60793-2-50 -
Part 2-50: Product specifications -
Sectional specification for class B
single-mode fibres
IEC 61300 series Fibre optic interconnecting devices and EN 61300 series
passive components - Basic test and
measurement procedures
IEC 61300-1 -  Fibre optic interconnecting devices and EN 61300-1 -
passive components - Basic test and
measurement procedures -
Part 1: General and guidance
IEC 61300-2-1 -  Fibre optic interconnecting devices and EN 61300-2-1 -
passive components - Basic test and
measurement procedures -
Part 2-1: Tests - Vibration (sinusoidal)
IEC 61300-2-4 -  Fibre optic interconnecting devices and EN 61300-2-4 -
passive components - Basic test and
measurement procedures -
Part 2-4: Tests - Fibre/cable retention
IEC 61300-2-9 -  Fibre optic interconnecting devices and EN 61300-2-9 -
passive components - Basic test and
measurement procedures -
Part 2-9: Tests - Shock
IEC 61300-2-14 -  Fibre optic interconnecting devices and EN 61300-2-14 -
passive components - Basic test and
measurement procedures -
Part 2-14: Tests - High optical power
IEC 61300-2-17 -  Fibre optic interconnecting devices and EN 61300-2-17 -
passive components - Basic test and
measurement procedures -
Part 2-17: Tests - Cold
Publication Year Title EN/HD Year
IEC 61300-2-18 -  Fibre optic interconnecting devices and EN 61300-2-18 -
passive components - Basic test and
measurement procedures -
Part 2-18: Tests - Dry heat - High
temperature endurance
IEC 61300-2-19 -  Fibre optic interconnecting devices and EN 61300-2-19 -
passive components - Basic test and
measurement procedures -
Part 2-19: Tests - Damp heat (steady
state)
IEC 61300-2-22 -  Fibre optic interconnecting devices and EN 61300-2-22 -
passive components - Basic test and
measurement procedures -
Part 2-22: Tests - Change of
temperature
IEC 61300-2-42 -  Fibre optic interconnecting devices and EN 61300-2-42 -
passive components - Basic test and
measurement procedures -
Part 2-42: Tests - Static side load for
strain relief
IEC 61300-2-44 -  Fibre optic interconnecting devices and EN 61300-2-44 -
passive components - Basic test and
measurement procedures -
Part 2-44: Tests - Flexing of the strain
relief of fibre optic devices
IEC 61300-3-2 -  Fibre optic interconnecting devices and EN 61300-3-2 -
passive components - Basic test and
measurement procedures -
Part 3-2: Examinations and
measurements - Polarization dependent
loss in a single-mode fibre optic device
IEC 61300-3-7 -  Fibre optic interconnecting devices and EN 61300-3-7 -
passive components - Basic test and
measurement procedures -
Part 3-7: Examinations and
measurements - Wavelength
dependence of attenuation and return
loss of single mode components
IEC 61300-3-20 -  Fibre optic interconnecting devices and EN 61300-3-20 -
passive components - Basic test and
measurement procedures -
Part 3-20: Examinations and
measurements - Directivity of fibre optic
branching devices
IEC 62074-1 -  Fibre optic interconnecting devices and EN 62074-1 -
passive components - Fibre optic WDM
devices -
Part 1: Generic specification
ITU-T -  Gigabit-capable Passive Optical - -
Recommendation Networks (G-PON): Physical Media
G.984.2 Dependent (PMD) layer specification
ITU-T -  Gigabit-capable passive optical - -
Recommendation networks (G-PON): Enhancement band
G.984.5
IEC 61753-382-2 ®
Edition 1.0 2015-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Fibre optic interconnecting devices and passive components – Performance

standard –
Part 382-2: Non-connectorized single-mode bidirectional G-PON-NGA WWDM

devices for category C – Controlled environment

Dispositifs d'interconnexion et composants passifs à fibres optiques – Norme

de performance –
Partie 382-2: Dispositifs WWDM G-PON-NGA bidirectionnels unimodaux non

connectorisés pour la catégorie C – Environnement contrôlé

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.20 ISBN 978-2-8322-2997-2

– 2 – IEC 61753-382-2:2015 © IEC 2015
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms, definitions and abbreviations . 6
3.1 Terms and definitions . 6
3.2 Abbreviations . 7
4 Test . 8
5 Test report . 8
6 Performance requirements. 8
6.1 Reference components . 8
6.2 Dimensions . 8
6.3 Sample size . 8
6.4 Test details and requirements . 9
Annex A (normative) Sample size . 14
Annex B (informative) General information for G-PON-NGA WDM device . 15
Annex C (informative) General information for definition of wavelength ranges for G-
PON-NGA WDM devices . 18
Bibliography . 20

Figure B.1 – Sample of the wavelength dependence of insertion loss of a G-PON-NGA
WDM device . 15
Figure B.2 – Reference diagram of WDM1r from ITU-T Recommendation G.984.5 . 15
Figure B.3 – Structure of WDM1r from ITU-T Recommendation G.984.5 . 16
Figure B.4 – Reference diagram of a dual-fibre WDM1r with video support from ITU-T
Recommendation G.984.5 . 16
Figure B.5 – Structure of a dual-fibre WDM1r with video support from ITU-T
Recommendation G.984.5 . 16
Figure B.6 – Reference diagram of WDM1r with video and OTDR support from ITU-T
Recommendation G.984.5 . 17
Figure B.7 – Structure of WDM1r with video and OTDR support from ITU-T
Recommendation G.984.5 . 17
Figure C.1 – Overview about standardized wavelength ranges . 19

Table 1 – Test details and requirements (1 of 5) . 9
Table A.1 – Sample size . 14
Table C.1 – Operating wavelength range of G-PON NGA (source: ITU-T G.984.5) . 18
Table C.2 – WWDM device wavelength range for G-PON and NGA (source ITU-T
G.984.5) . 18

IEC 61753-382-2:2015 © IEC 2015 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
PERFORMANCE STANDARD –
Part 382-2: Non-connectorized single-mode
bidirectional G-PON-NGA WWDM d
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.