Optical fibre cables - Part 3-70: Outdoor cables - Family specification for outdoor optical fibre cables for rapid/multiple deployment

IEC 60794-3-70:2016 is part of a family specification that covers outdoor optical fibre cables intended for rugged terrestrial rapid/multiple deployment. These cables, with enhanced mechanical, environmental and ingress performance may be used wherever a rapid or multiple deployment is relevant (e.g. mobile broadcast units, emergency rescue services, outdoor motion-robotics, etc.). This publication is to be read in conjunction with IEC 60794-1-1:2015, IEC 60794-1-2:2013 and IEC 60794-3:2014. Keywords: outdoor optical fibre cables intended for rugged terrestrial rapid/multiple deployment

Lichtwellenleiter - Teil 3-70: Außenkabel - Familienspezifikation für Lichtwellenleiter-Außenkabel für schnelle/mehrfache Verlegung

Câbles à fibres optiques - Partie 3-70: Câbles extérieurs - Spécification de famille pour câbles à fibres optiques extérieurs pour déploiement rapide/multiple

L'IEC 60794-3-70:2016 est partie de une spécification de famille qui couvre les câbles à fibres optiques extérieurs destinés à un déploiement rapide/multiple terrestre renforcé. Ces câbles, dont les performances mécaniques, environnementales et d'infiltration sont améliorées, peuvent être utilisés partout où un déploiement rapide ou multiple est applicable (par exemple dans des unités mobiles de diffusion, des services de secours d'urgence, des robots mobiles extérieurs, etc.). Cette publication doit être lue conjointement avec la IEC 60794-1-1:2015, IEC 60794-1-2:2013 et IEC 60794-3:2014. Mots clés: les câbles fibres optiques extérieurs destinés à un déploiement rapide/multiple terrestre renforcé

Optični kabli - 3-70. del: Rodovna specifikacija za kable iz optičnih vlaken za zunanjo montažo za hitro/večkratno namestitev (IEC 60794-3-70:2016)

Ta del standarda IEC 60794 je rodovna specifikacija, ki zajema kable iz optičnih vlaken za zunanjo montažo, namenjene za hitro/večkratno namestitev na razgibanem območju. Izboljšane mehanske in okoljske lastnosti ter zaščita proti vdoru omogočajo uporabo teh kablov kjerkoli, kjer je potrebna hitra ali večkratna namestitev (npr. enote za mobilno oddajanje, službe za ukrepanje ob nesrečah, robotsko gibanje na prostem itd.).

General Information

Status
Withdrawn
Publication Date
12-May-2016
Withdrawal Date
02-Mar-2019
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
12-May-2024
Completion Date
12-May-2024

Relations

Buy Standard

Standard
EN 60794-3-70:2016 - BARVE
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2016
2SWLþQLNDEOLGHO5RGRYQDVSHFLILNDFLMD]DNDEOHL]RSWLþQLKYODNHQ]D
]XQDQMRPRQWDåR]DKLWURYHþNUDWQRQDPHVWLWHY ,(&
Optical Cables - Part 3.70: Family specification for outdoor optical fibre cables for
rapid/multiple deployment (IEC 60794-3-70:2016)
Ta slovenski standard je istoveten z: EN 60794-3-70:2016
ICS:
33.180.10 2SWLþQD YODNQDLQNDEOL Fibres and cables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60794-3-70

NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2016
ICS 33.180.01; 33.180.10
English Version
Optical fibre cables - Part 3-70: Outdoor cables - Family
specification for outdoor optical fibre cables for rapid/multiple
deployment
(IEC 60794-3-70:2016)
Câbles à fibres optiques - Partie 3-70: Câbles extérieurs - Lichtwellenleiter - Teil 3-70: Außenkabel -
Spécification de famille pour câbles à fibres optiques Familienspezifikation für Lichtwellenleiter-Außenkabel für
extérieurs pour déploiement rapide/multiple schnelle/mehrfache Verlegung
(IEC 60794-3-70:2016) (IEC 60794-3-70:2016)
This European Standard was approved by CENELEC on 2016-03-03. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60794-3-70:2016 E
European foreword
The text of document 86A/1692/FDIS, future edition 1 of IEC 60794-3-70, prepared by SC 86A "Fibres
and cables" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 60794-3-70:2016.
The following dates are fixed:
(dop) 2016-12-03
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
• latest date by which the national standards conflicting with (dow) 2019-03-03
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60794-3-70:2016 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated :
IEC 60793-1-40 NOTE Harmonized as EN 60793-1-40.
IEC 60811-404 NOTE Harmonized as EN 60811-404.

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year

IEC 60793-2-10 2011 Optical fibres -- Part 2-10: Product EN 60793-2-10 2011
specifications - Sectional specification for
category A1 multimode fibres
IEC 60793-2-50 2012 Optical fibres -- Part 2-50: Product EN 60793-2-50 2013
specifications - Sectional specification for
class B single-mode fibres
IEC 60794-1-1 -  EN 60794-1-1 -
IEC 60794-1-2 -  Optical fibre cables -- Part 1-2: Generic EN 60794-1-2 -
specification - Cross reference table for
optical cable test procedures
IEC 60794-1-21 -  Optical fibre cables -- Part 1-21: Generic EN 60794-1-21 -
specification - Basic optical cable test
procedures - Mechanical tests methods
IEC 60794-1-22 -  Optical fibre cables -- Part 1-22: Generic EN 60794-1-22 -
specification - Basic optical cable test
procedures - Environmental test methods
IEC 60794-1-23 -  Optical fibre cables -- Part 1-23: Generic EN 60794-1-23 -
specification - Basic optical cable test
procedures - Cable element test methods
IEC 60794-3 -  Optical fibre cables - Part 3: Outdoor EN 60794-3 -
cables - Sectional specification
ISO 4892-2 -  Plastics - Methods of exposure to EN ISO 4892-2 -
laboratory light sources - Part 2: Xenon-arc
lamps
IEC 60794-3-70 ®
Edition 1.0 2016-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Optical fibre cables –
Part 3-70: Outdoor cables – Family specification for outdoor optical fibre cables

for rapid/multiple deployment
Câbles à fibres optiques –
Partie 3-70: Câbles extérieurs – Spécification de famille pour câbles à fibres

optiques extérieurs pour déploiement rapide/multiple

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.01 ; 33.180.10 ISBN 978-2-8322-3156-2

– 2 – IEC 60794-3-70:2016 © IEC 2016
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references. 5
3 General requirements . 5
4 Specification for outdoor optical fibre cables for rapid/multiple deployment . 6
4.1 Construction . 6
4.1.1 General . 6
4.1.2 Rapid/multiple deployment optical fibre cables . 6
4.2 Optical fibres. 7
4.3 Secondary coating . 7
4.4 Outer sheath . 7
4.5 Mechanical and environmental tests . 7
5 Testing of rapid/multiple deployment optical fibre cables . 7
5.1 General . 7
5.2 Applicable tests . 8
5.3 Tensile performance . 8
5.4 Abrasion . 9
5.5 Crush . 9
5.6 Impact . 9
5.7 Ribbon strippability . 10
5.8 Repeated bending . 10
5.9 Torsion . 10
5.10 Flexing . 10
5.11 Kink . 11
5.12 Bend . 11
5.13 Bending under tension. 11
5.14 Temperature cycling . 11
5.15 Water penetration . 12
5.16 Ageing . 12
5.17 UV resistance . 12
5.18 External freezing . 12
5.19 Fibre ribbon separability . 13
5.20 Tube kinking . 13
Annex A (normative) Blank detail specification and minimum requirements . 14
Bibliography . 15

Table 1 – Tests applicable for mechanical and environmental performance of a
rapid/multiple deployment optical fibre cable . 8
Table A.1 – Cable description . 14

IEC 60794-3-70:2016 © IEC 2016 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
OPTICAL FIBRE CABLES –
Part 3-70: Outdoor cables –
Family specification for outdoor optical
fibre cables for rapid/multiple deployment

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, e
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.