EN 62639:2012
(Main)Fluorescent induction lamps - Performance specification
Fluorescent induction lamps - Performance specification
IEC 62639:2012 specifies the performance requirements for fluorescent induction lamps for general lighting purposes. In this standard, the term 'lamp' stands for 'induction lamp'. It may be expected that lamps which comply with this standard will start and operate satisfactorily at voltages between 92 % and 106 % of rated supply voltage and at an ambient air temperature between 10 °C and 50 °C, when operated with ballasts complying with IEC 60929 and IEC 61347-2-3, as far as applicable, and in a luminaire complying with IEC 60598-1.
Leuchtstoff-Induktionslampen - Anforderungen an die Arbeitsweise
Lampes fluorescentes à induction - Spécification de performance
La CEI 62639:2012 spécifie les exigences de performance des lampes fluorescentes à induction pour l'éclairage général. Dans la présente norme, le terme 'lampe' désigne une 'lampe à induction'. On peut s'attendre à ce que les lampes conformes à la présente norme s'amorcent et fonctionnent de façon satisfaisante à des tensions comprises entre 92 % et 106 % de la tension assignée d'alimentation et à une température ambiante comprise entre 10 °C et 50 °C, lorsqu'elles fonctionnent avec des ballasts conformes à la CEI 60929 et à la CEI 61347-2-3, dans la mesure où cela s'applique, et lorsqu'elles sont installées dans un luminaire conforme à la CEI 60598-1.
Fluorescenčne indukcijske sijalke - Zahteve za delovanje
Ta mednarodni standard določa zahteve za delovanje za fluorescenčne indukcijske sijalke za splošno uporabo v razsvetljavi. V tem standardu izraz »sijalka« pomeni »indukcijske sijalke«. Pričakuje se lahko, da se bodo sijalke, usklajene s tem standardom, prižigale in zadovoljivo delovale pri napetostih od 92 % do 106 % nazivne napajalne napetosti in temperaturi okolja od 10 °C do 50 °C, če so opremljene z dušilko, usklajeno s standardoma IEC 60929 in IEC 61347-2-3, kjer veljata, in nameščene v svetilki, ki je v skladu s standardom IEC 60598-1.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2012
)OXRUHVFHQþQHLQGXNFLMVNHVLMDONH=DKWHYH]DGHORYDQMH
Fluorescent induction lamps - Performance requirements
Leuchtstoff-Induktionslampen - Anforderungen an die Arbeitsweise
Lampes fluorescentes à induction - Spécification de performance
Ta slovenski standard je istoveten z: EN 62639:2012
ICS:
29.140.30 )OXRUHVFHQþQHVLMDONH6LMDONH Fluorescent lamps.
Discharge lamps
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 62639
NORME EUROPÉENNE
April 2012
EUROPÄISCHE NORM
ICS 29.140.30
English version
Fluorescent induction lamps -
Performance specification
(IEC 62639:2012)
Lampes fluorescentes à induction - Leuchtstoff-Induktionslampen -
Spécification de performance Anforderungen an die Arbeitsweise
(CEI 62639:2012) (IEC 62639:2012)
This European Standard was approved by CENELEC on 2012-03-27. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62639:2012 E
Foreword
The text of document 34A/1526/FDIS, future edition 1 of IEC 62639, prepared by SC 34A, "Lamps", of
IEC/TC 34, "Lamps and related equipment" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 62639:2012.
The following dates are fixed:
(dop) 2012-12-27
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-03-27
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 62639:2012 was approved by CENELEC as a European
Standard without any modification.
- 3 - EN 62639:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60081 1997 Double-capped fluorescent lamps - EN 60081 1998
Performance specifications
IEC 60598-1 - Luminaires - EN 60598-1 -
Part 1: General requirements and tests
IEC 60929 - AC and/or DC-supplied electronic control gear EN 60929 -
for tubular fluorescent lamps - Performance
requirements
IEC 61347-2-3 - Lamp controlgear - EN 61347-2-3 -
Part 2-3: Particular requirements for a.c.
and/or d.c. supplied electronic control gear for
fluorescent lamps
IEC 62532 2011 Fluorescent induction lamps - Safety EN 62532 2011
specifications
IEC 62639 ®
Edition 1.0 2012-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Fluorescent induction lamps – Performance specification
Lampes fluorescentes à induction – Spécification de performance
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XB
ICS 29.140.30 ISBN 978-2-88912-920-1
– 2 – 62639 IEC:2012
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Lamp requirements . 7
4.1 General . 7
4.2 Marking . 8
4.2.1 General . 8
4.2.2 Correlated colour temperature (CCT) and colour rendering index (R ) . 8
a
4.2.3 Polarity . 8
4.3 Dimensions . 8
4.4 Starting characteristics . 8
4.5 Electrical characteristics . 8
4.6 Photometric characteristics . 8
4.7 Lumen maintenance . 9
4.8 Life . 9
5 Information for ballast design . 9
6 Information for luminaire design . 9
7 Data sheets . 9
7.1 Diagrammatic data sheets for location of lamp dimensions . 9
7.2 Lamp data sheets . 18
7.3 Maximum outline sheets . 44
Annex A (normative) Method of test for starting characteristics . 55
Annex B (normative) Method of test for electrical and photometric characteristics . 57
Annex C (normative) Method of test for lumen maintenance and life . 61
Annex D (informative) Information for ballast design . 62
Annex E (informative) Information for luminaire design . 66
Bibliography . 67
Figure A.1 – Test circuit for measurement of starting characteristics . 56
Figure B.1 – Schematic set-up for measurement of electrical characteristics of
externally coupled induction lamps and photometrical characteristics . 59
Figure B.2 – Example of calorimetric set-up for measurement of power of internally a-
type coupled induction lamps . 60
Figure D.1 – Circuit for testing ballasts – Lamp voltage, lamp current, phase shift and
frequency measured at starting and during operation . 63
Figure D.2 – Circuit for testing ballasts – Lamp voltage, current and frequency
measured at starting . 64
Figure D.3 – Circuit for testing ballasts – Lamp voltage, current, phase shift and
frequency measured during operation . 65
Table A.1 – Frequencies of specially prepared ballasts . 55
62639 IEC:2012 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
FLUORESCENT INDUCTION LAMPS –
PERFORMANCE SPECIFICATION
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62639 has been prepared by subcommittee 34A: Lamps, of IEC
technical committee 34: Lamps and related equipment.
The text of this standard is based on the following documents:
FDIS Report on voting
34A/1526/FDIS 34A/1555/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
– 4 – 62639 IEC:2012
The committee has decided that the contents of this publication will remain unchanged un
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.