EN 62591:2010

Industrial communication networks - Wireless communication network and communication profiles - WirelessHART™

IEC 62591:2010(E) specifies an additional Type 20 communication network to IEC 61158-5-20, IEC 61158-6-20 and a Communication Profile CP 9/2 in addition to IEC 61784-1 CPF 9 and covers the following: - Physical layer service definition and protocol specification, - Data-link layer service and protocol, - Application layer service and protocol, - Network management, - Security, - Communication profile, - Wireless procedures and Gateway. It cancels and replaces IEC/PAS 62591 published in 2009. This first edition constitutes a technical revision.

Industrielle Kommunikationsnetze - Kommunikationsnetze und Kommunikationsprofile - WirelessHART™

Réseaux de communication industrielles – Réseaux de communications sans fil et profils de communication - WirelessHART™

La CEI 62591:2010 spécifie un réseau de communication type 20 supplémentaire en ajout à la IEC 61158-5-20 et à la IEC 61158-6-20 ainsi qu'un Profil de communication CP 9/2 en ajout à la famille de profils de communications CPF 9 de la IEC 61784-1. La présente norme spécifie ce qui suit: - Définition de service de la couche physique et spécification de protocole, - Service et protocole de la couche liaison de données, - Service et protocole de la couche application, - Gestion de réseau, - Sécurité, - Profil de communication, - Procédures sans fil et Passerelle. Elle annule et remplace le IEC/PAS 62591 publiée en 2009. Cette première édition constitue une révision technique. La présente version bilingue, publiée en 2011-07 correspond à la version anglaise. La version française de cette norme n'a pas été soumise au vote.

Industrijska komunikacijska omrežja - Brezžično komunikacijsko omrežje in komunikacijski profili - Brezžični HART (IEC 62591:2010)

Ta mednarodni standard določa dodaten tip 20 komunikacijskega omrežja za IEC 61158-5-20 in IEC 61158-6-20 in komunikacijski profil CP 9/2 kot dodatek k IEC 61784-1 CPF 9. Ta standard določa naslednje:
- fizično plast definicije storitve in specifikacije protokola,
- podatkovno povezavo plasti storitve in protokola,
- uporabno povezavo plasti storitve in protokola,
- upravljanje omrežja,
- varnost,
- komunikacijski profil,
- brezžične postopke in
- prehod.

General Information

• Status: Withdrawn
• Publication Date: 24-Jun-2010
• Withdrawal Date: 31-May-2013
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.100.05 - Multilayer applications
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65C - IEC_SC_65C
• Parallel Committee: IEC/SC 65C - IEC_SC_65C
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 16-Sep-2019
• Completion Date: 16-Sep-2019
• Ref Project: SIST EN 62591:2010 - Industrial communication networks - Wireless communication network and communication pofiles - WirelessHART (IEC 62591:2010)

Relations

• Replaced By: EN 62591:2016 - Industrial communication networks - Wireless communication network and communication profiles - WirelessHART™
• Effective Date: 23-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62591:2010
01-september-2010
,QGXVWULMVNDNRPXQLNDFLMVNDRPUHåMD%UH]åLþQRNRPXQLNDFLMVNRRPUHåMHLQ
NRPXQLNDFLMVNLSURILOL%UH]åLþQL+$57,(&
Industrial communication networks - Wireless communication network and
communication pofiles - WirelessHART (IEC 62591:2010)
Industrielle Kommunikationsnetze - Kommunikationsnetze und Kommunikationsprofile -
WirelessHART (IEC 62591:2010)
Réseaux de communication industrielles - Réseaux de communications sans fil et profils
de communication - WirelessHART (CEI 62591:2010)
Ta slovenski standard je istoveten z: EN 62591:2010
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN 62591:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62591:2010

---------------------- Page: 2 ----------------------

SIST EN 62591:2010

EUROPEAN STANDARD
EN 62591

NORME EUROPÉENNE
June 2010
EUROPÄISCHE NORM

ICS 25.040.40; 35.100.05


English version


Industrial communication networks -
Wireless communication network and communication profiles -
WirelessHART™
(IEC 62591:2010)


Réseaux de communication industrielles - Industrielle Kommunikationsnetze -
Réseaux de communications sans fil Kommunikationsnetze
et profils de communication - und Kommunikationsprofile -
WirelessHART™ WirelessHART™
(CEI 62591:2010) (IEC 62591:2010)




This European Standard was approved by CENELEC on 2010-06-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62591:2010 E

---------------------- Page: 3 ----------------------

SIST EN 62591:2010
EN 62591:2010 - 2 -
Foreword
The text of document 65C/587/FDIS, future edition 1 of IEC 62591, prepared by SC 65C, Industrial
networks, of IEC TC 65, Industrial-process measurement, control and automation, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 62591 on 2010-06-01.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2011-03-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2013-06-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62591:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61158-6-9 NOTE  Harmonized as EN 61158-6-9.
__________

---------------------- Page: 4 ----------------------

SIST EN 62591:2010
- 3 - EN 62591:2010
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the
...