EN 61753-021-2:2008
(Main)Fibre optic interconnecting devices and passive components performance standard - Part 021-2: Grade C/3 single-mode fibre optic connectors for category C - Controlled environment
Fibre optic interconnecting devices and passive components performance standard - Part 021-2: Grade C/3 single-mode fibre optic connectors for category C - Controlled environment
This part of IEC 61753 defines C/3 minimum initial test and measurement requirements and severities which a single-mode connector/cable assembly must satisfy in order to be categorized as meeting the IEC standard category C (controlled environment), as defined in Clause A.2 of IEC 61753-1. The standard has been updated to reflect changes made to IEC 61753-1.
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 021-2: Lichtwellenleiter-Steckverbinder der Stufe C/3 für Einmodenfasern für die Kategorie C - Kontrollierte Umgebung
Norme de qualité de fonctionnement des dispositifs d'interconnexion et composants passifs à fibres optiques - Partie 021-2: Connecteurs à fibres optiques unimodales de classe C/3 pour la catégorie C - Environnement contrôlé
La présente partie de la CEI 61753 définit les exigences d'essais et de mesures et les sévérités initiales minimales C/3 auxquels un assemblage câble/connecteur unimodaux doit satisfaire, afin d'être considéré comme satisfaisant aux critères de la catégorie C (environnements contrôlés) des normes CEI définis dans l'Article A.2 de la CEI 61753-1. Cette norme a été mise à jour afin de prendre en compte des modifications effectuées dans la CEI 61753-1.
Standard lastnosti optičnih spojnih elementov in pasivnih komponent - 021-2. del: Enorodne svitkaste naprave brez konektorjev CWDM za kategorijo C - Nadzorovano okolje (IEC 61753-021-2:2007)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2008
1DGRPHãþD
SIST EN 61753-021-2:2004
6WDQGDUGODVWQRVWLRSWLþQLKVSRMQLKHOHPHQWRYLQSDVLYQLKNRPSRQHQWGHO
(QRURGQHVYLWNDVWHQDSUDYHEUH]NRQHNWRUMHY&:'0]DNDWHJRULMR&
1DG]RURYDQRRNROMH,(&
Fibre optic interconnecting devices and passive components performance standard -
Part 021-2: Grade C/3 single-mode fibre optic connectors for category C - Controlled
environment (IEC 61753-021-2:2007)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
021-2: Lichtwellenleiter-Steckverbinder der Stufe C/3 für Einmodenfasern für die
Kategorie C - Kontrollierte Umgebung (IEC 61753-021-2:2007)
Norme de qualité de fonctionnement des dispositifs d'interconnexion et composants
passifs a fibres optiques - Partie 021-2: Connecteurs a fibres optiques unimodales de
classe C/3 pour la catégorie C - Environnement contrôlé (CEI 61753-021-2:2007)
Ta slovenski standard je istoveten z: EN 61753-021-2:2008
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 61753-021-2
NORME EUROPÉENNE
March 2008
EUROPÄISCHE NORM
ICS 33.180.20 Supersedes EN 61753-021-2:2002
English version
Fibre optic interconnecting devices
and passive components performance standard -
Part 021-2: Grade C/3 single-mode fibre optic connectors
for category C -
Controlled environment
(IEC 61753-021-2:2007)
Norme de qualité de fonctionnement Lichtwellenleiter -
des dispositifs d'interconnexion Verbindungselemente
et composants passifs à fibres optiques - und passive Bauteile -
Partie 021-2: Connecteurs à fibres Betriebsverhalten -
optiques unimodales de classe C/3 Teil 021-2: Lichtwellenleiter-
pour la catégorie C - Steckverbinder der Stufe C/3
Environnement contrôlé für Einmodenfasern für die Kategorie C -
(CEI 61753-021-2:2007) Kontrollierte Umgebung
(IEC 61753-021-2:2007)
This European Standard was approved by CENELEC on 2008-03-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61753-021-2:2008 E
Foreword
The text of document 86B/2602/FDIS, future edition 2 of IEC 61753-021-2, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61753-021-2 on 2008-03-01.
This European Standard supersedes EN 61753-021-2:2002.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-12-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-03-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61753-021-2:2007 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 61753-021-2:2008
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
1) 2)
IEC 60793-2-50 - Optical fibres - EN 60793-2-50 2004
Part 2-50: Product specifications - Sectional + corr. July 2004
specification for class B single-mode fibres
1) 2)
IEC 61300-2-1 - Fibre optic interconnecting devices and EN 61300-2-1 2003
passive components - Basic test and
measurement procedures -
Part 2-1: Tests - Vibration (sinusoidal)
1) 2)
IEC 61300-2-2 - Fibre optic interconnecting devices and EN 61300-2-2 2003
passive components - Basic test and
measurement procedures -
Part 2-2: Tests - Mating durability
1) 2)
IEC 61300-2-4 - Fibre optic interconnecting devices and EN 61300-2-4 1997
passive components - Basic test and
measurement procedures -
Part 2-4: Tests - Fibre/cable retention
1) 2)
IEC 61300-2-6 - Fibre optic interconnecting devices and EN 61300-2-6 1997
passive components - Basic test and
measurement procedures -
Part 2-6: Tests - Tensile strength of coupling
mechanism
1) 2)
IEC 61300-2-12 - Fibre optic interconnecting devices and EN 61300-2-12 2005
passive components - Basic test and
measurement procedures -
Part 2-12: Tests - Impact
1) 2)
IEC 61300-2-17 - Fibre optic interconnecting devices and EN 61300-2-17 2003
passive components - Basic test and
measurement procedures -
Part 2-17: Tests - Cold
1) 2)
IEC 61300-2-18 - Fibre optic interconnecting devices and EN 61300-2-18 2005
passive components - Basic test and
measurement procedures -
Part 2-18: Tests - Dry heat - High temperature
endurance
1) 2)
IEC 61300-2-19 - Fibre optic interconnecting devices and EN 61300-2-19 2005
passive components - Basic test and
measurement procedures -
Part 2-19: Tests - Damp heat (steady state)
1)
Undated reference.
2)
Valid edition at date of issue.
Publication Year Title EN/HD Year
1) 2)
IEC 61300-2-22 - Fibre optic interconnecting devices and EN 61300-2-22 2007
passive components - Basic test and
measurement procedures -
Part 2-22: Tests - Change of temperature
1) 2)
IEC 61300-2-42 - Fibre optic interconnecting devices and EN 61300-2-42 2005
passive components - Basic test and
measurement procedures -
Part 2-42: Tests - Static side load for
connectors
1) 2)
IEC 61300-2-44 - Fibre optic interconnecting devices and EN 61300-2-44 2005
passive components - Basic test and
measurement procedures -
Part 2-44: Tests - Flexing of the strain relief of
fibre optic devices
1) 2)
IEC 61300-3-1 - Fibre optic interconnecting devices and EN 61300-3-1 2005
passive components - Basic test and
measurement procedures -
Part 3-1: Examinations and measurements -
Visual examination
1) 2)
IEC 61300-3-3 - Fibre optic interconnecting devices and EN 61300-3-3 2003
passive components - Basic test and
measurement procedures -
Part 3-3: Examinations and measurements -
Active monitoring of changes in attenuation
and return loss
1) 2)
IEC 61300-3-4 - Fibre optic interconnecting devices and EN 61300-3-4 2001
passive components - Basic test and
measurement procedures -
Part 3-4: Examinations and measurements -
Attenuation
1) 2)
IEC 61300-3-6 - Fibre optic interconnecting devices and EN 61300-3-6 2003
passive components - Basic test and
measurement procedures -
Part 3-6: Examinations and measurements -
Return loss
1) 2)
IEC 61300-3-28 - Fibre optic interconnecting devices and EN 61300-3-28 2002
passive components - Basic test and
measurement procedures -
Part 3-28: Examinations and measurements -
Transient loss
1) 2)
IEC 61300-3-34 - Fibre optic interconnecting devices and EN 61300-3-34 2002
passive components - Basic test and
measurement procedures -
Part 3-34: Examinations and measurements -
Attenuation of random mated connectors
IEC 61753-1 2007 Fibre optic interconnecting devices and EN 61753-1 2007
passive components performance standard -
Part 1: General and guidance for performance
standards
IEC 61754 Series Fibre optic connector interfaces EN 61754 Series
(mod)
IEC 61755 Series Fibre optic connector optical interfaces EN 61755 Series
(mod)
IEC 61755-3 Series Fibre optic connector optical interfaces - EN 61755-3 Series
(mod) Part 3: Optical interface
- 5 - EN 61753-021-2:2008
Publication Year Title EN/HD Year
1)
ISO/IEC 11801 - Information technology - Generic cabling for - -
customer premises
IEC 61753-021-2
Edition 2.0 2007-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components performance
standard –
Part 021-2: Grade C/3 single-mode fibre optic connectors for category C –
Controlled environment
Norme de qualité de fonctionnement des dispositifs d'interconnexion et
composants passifs à fibres optiques –
Partie 021-2: Connecteurs à fibres optiques unimodales de classe C/3 pour la
catégorie C – Environnement contrôlé
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
P
CODE PRIX
ICS 33.180.20 ISBN 2-8318-9465-4
– 2 – 61753-021-2 © IEC:2007
CONTENTS
FOREWORD.3
1 Scope.5
2 Normative references .5
3 Terms and definitions .6
4 Tests .7
5 Test report.7
6 Reference components.8
7 Performance requirements .8
7.1 Dimensions .8
7.2 Sample size, test sequencing and grouping.8
7.3 Endface geometry .8
7.4 Performance criteria .8
7.5 Performance details .8
Annex A (normative) Sample size, test sequencing and grouping requirements .14
Figure 1 – Pigtail assembly.7
Figure 2 – Jumper cable assembly.7
Table 1 – Performance levels .8
Table 2 – Performance details .9
Table A.1 – Sample size, test sequencing and grouping requirements .14
61753-021-2 © IEC:2007 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS PERFORMANCE STANDARD –
Part 021-2: Grade C/3 single-mode fibre optic connectors for category C –
Controlled environment
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.