EN 61754-12:1999

Fibre optic connector interfaces - Part 12: Type FS connector family

Defines the standard interface dimensions for the type FS connector family which is a duplex connector set of plug and adaptor configuration. The plug has a pair of cylindrical spring loaded abutting ferrules of 2,5 mm nominal ferrule diameter. The optical alignment mechanism is a rigid bore or resilient sleeve contained within the adaptor. It includes a hand-released latch coupling. The plug has multiple keyway arrangements and the adaptor has multiple key configurations. The keying scheme is exclusionary and is used to limit mating between plug and adaptor to specific key combinations.

Steckgesichter von Lichtwellenleiter-Steckverbindern - Teil 12: Bauart FS Steckverbinderfamilie

Interfaces de connecteurs pour fibres optiques - Partie 12: Famille de connecteurs du type FS

Définit les dimensions d'interface normalisées pour la famille de connecteurs de type FS qui est un ensemble connecteur duplex à configuration fiche et adaptateur. La fiche possède une paire de férules cylindriques en buttée comprimées par un ressort, qui ont un diamètre nominal de 2,5 mm. Le mécanisme d'alignement optique est un trou rigide ou une bande élastique contenue dans l'adaptateur. Il comprend un dispositif de verrouillage manuel. La fiche possède des dispositions d'ergots multiples et l'adaptateur possède des configurations d'ergots multiples. Le schéma des ergots est exclusif et il est utilisé pour limiter les accouplements entre fiches et adaptateurs à des combinaisons d'ergots spécifiques.

Fibre optic interfaces - Part 12: Type FS connector family (IEC 61754-12:1999)

General Information

• Status: Published
• Publication Date: 23-Nov-1999
• Withdrawal Date: 30-Sep-2002
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Parallel Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 24-Nov-1999
• Completion Date: 24-Nov-1999
• Ref Project: SIST EN 61754-12:2001 - Fibre optic connector interfaces -- Part 12: Type FS connector family

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61754-12:2001
01-februar-2001
Fibre optic interfaces - Part 12: Type FS connector family (IEC 61754-12:1999)
Fibre optic connector interfaces -- Part 12: Type FS connector family
Steckgesichter von Lichtwellenleiter-Steckverbindern -- Teil 12: Bauart FS
Steckverbinderfamilie
Interfaces de connecteurs pour fibres optiques -- Partie 12: Famille de connecteurs du
type FS
Ta slovenski standard je istoveten z: EN 61754-12:1999
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61754-12:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

NORME CEI
INTERNATIONALE IEC
61754-12
INTERNATIONAL
Première édition
STANDARD
First edition
1999-08
Interfaces de connecteurs pour fibres optiques –
Partie 12:
Famille de connecteurs de type FS
Fibre optic connector interfaces –
Part 12:
Type FS connector family
 IEC 1999 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photo-copie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: [phone] e-mail: [e-mail] IEC web site http://www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
X
PRICE CODE
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 2 ----------------------

61754-12 © IEC:1999 – 3 –
CONTENTS
Page
FOREWORD . 5
Clause
1 Scope . 7
2 Description . 7
3 Interfaces . 7
4 Intermateable connectors. 9
Figures and tables . 11

---------------------- Page: 3 ----------------------

61754-12 © IEC:1999 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
FIBRE OPTIC CONNECTOR INTERFACES –
Part 12: Type FS connector family
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization
for Standardization (ISO) in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical reports or guides and they are accepted by the National Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall n
...